• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.482-490
• /
• 2017

The radar signal processing procedure is divided into the pre-processing such as frequency down converting, down sampling, pulse compression, and etc, and the post-processing such as doppler filtering, extracting target information, detecting, tracking, and etc. The former is generally designed using FPGA because the procedure is relatively simple even though there are large amounts of ADC data to organize very quickly. On the other hand, in general, the latter is parallel processed by multiple DSPs because of complexity, flexibility and real-time processing. This paper presents the radar signal processor design using FPGA which includes not only the pre-processing but also the post-processing such as doppler filtering, bore-sight error, NCI(Non-Coherent Integration), CFAR(Constant False Alarm Rate) and etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.842-843
• /
• 2007

In this paper, the proper rebate level can be decided in programs of energy savings by solving an optimization problem with an objective function, which satisfies a maximum value of total energy savings. And then, each prevalence amount is estimated by using virtual Bass model which is a function of rebate level, instead of the conventional Bass model. Finally, by cost/benefit analysis of the estimated prevalence amounts, the priority order is obtained for the investment of each program. The priority order obtained in this way may result the improvement of investment efficiency for DSM(Demand-Side Management) programs and the reasonable plan decision for supply and demand in power system.

• 대한금속재료학회지
• /
• 제50권3호
• /
• pp.248-255
• /
• 2012

AlN thin films containing various amounts of Co, AlN-Co, and Al-Co alloy particles were prepared using a two-facing-target type dc reactive sputtering (TFTS) system. The as-deposited films exhibited the variable nature expected from an AlN-rich phase, and an amorphous-like phase, depending on the Co content in the films. Specific favorable microstructures were prepared by optimizing annealing conditions. Those microstructures and their magnetic properties and resistivity were investigated. As-deposited films showed very small saturation magnetization and an amorphous-like structure. However, when annealed, the as-deposited amorphous-like phase decomposes into phases of AlN, Co and Al-Co. These annealing induced changes in the microstructure improve the magnetization and resistivity of the films. Further improvement of soft magnetic properties could lead to the material being used for high density magnetic recording head material.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.335-339
• /
• 2016

The purpose of this study is to analyze effects of greenhouse gas reduction in organic agriculture. To accomplish the objective of the study, a field survey was conducted. Based on the field survey results, LCA method was used to estimate the greenhouse gas emission. The farmer survey and LCA estimation data were provided by The Foundation of Agricultural Technology Commercialization and Transfer. The GHG estimation results showed that GHG emission of organic farming is less by 10.6~89.3% when compared with the conventional farming. In addition, the economic value of greenhouse gas reduction in organic farming amounts to 1,097 million won. Based on major findings, in response to national greenhouse gas reduction target, it is needed to expand organic farming, supporting organic farmers' income.

• 한국환경농학회지
• /
• 제35권2호
• /
• pp.97-103
• /
• 2016

BACKGROUND: Clay mineral is well known to improve physico-chemical of soil. The objective of this study was to investigate the growth characteristics and inorganic nutrient contents of crops with application levels of phyllite.METHODS AND RESULTS: Both young radish and lettuce were selected as target crops for this study. The experiment was conducted in a wagner pot(1/5000a) in glass house at Sunchon National University. Treatment conditions were divided P0NPK(No phyllite + NPK), P5NPK(phyllite 5 Mg/ha + NPK), P10NPK(phyllite 10 Mg/ha + NPK) and P15NPK(phyllite 15 Mg/ha + NPK) by crops, respectively. Bulk density and porosity of soil in control without treatment conditions were ranged from 1.02 ∼1.04 g/cm³ and 56.5∼57.0%, respectively, and those for treatments with phyllite were in the ranged from 0.94∼1.00 g/cm³ and 58.4∼63.5%, respectively. Dry weights of young radish and lettuce were higher in P15NPK treatment than those in other treatments. The amounts of T-N, T-P and K uptake in young radish with phyllite application treatments were increased 36∼115, 18∼67 and 20∼76% than without phyllite application treatment, respectively. In lettuce treatments, amounts of T-N, T-P and K uptake were intended to all tested treatments similar with result of young radish treatment.CONCLUSION: Therefore, these results confirm that phyllite application to the soil improves physico-chemical of soil in addition to improving growth of young radish and lettuce.

• 물과 미래
• /
• 제28권3호
• /
• pp.133-142
• /
• 1995

호수지역에서, 호수의 위치가 지하수 flux에 미치는 영향을 파악하고 지하수와 호소수와의 교류관계를 관측하기 위한 감시망 설계에 대한 지침을 제공하기 위하여 호수의 위치를 달리하는 3종류의 가상 지하수 시스템을 설계하였다. 각각의 지하수 시스템에 대하여 3차원정상 모의발생을 행하였으며 다음과 같은 결과를 얻었다: (1) 호수의 위치가 지하수 시스템의 상류측에 위치할 때 보다 하류측에 위치하는 경우가 호소수와 지하수와의 고류가 활발하다. (2) 대상지역의 호수는 존재하는 위치에 상관없이 지하수가 호수로 유출되는 양보다 호소수가 지하수를 함양하는 양이 많다. (3) 호수의 위치가 유역의 상류층에 위치 할수록 지하수 유출입량의 비가 커진다. (4) 호수의 바닥부분에서 지하수의 수평방향 flux에 의한 교류는 연직방향 flux에 의한 교류 보다 훨씬 더 활발하다.

• 한국환경농학회지
• /
• 제25권3호
• /
• pp.236-246
• /
• 2006

In this study, we give insight into questionable results that can be encountered in the conventional sequential extraction of heavy metals (Cd, Cu, and Zn) from soils. Objectives of this study were to determine the extraction variability of exchangeable (EXC)-metals as using six different EXC-extractants commonly accepted, and to investigate selectivity problems with carbonates bound (CAB)-metal fraction, a buffered acetate (1.0 M NaOAc; pH 5.0) extractable-metal fraction, leading to erratic results in especially non-calcareous soils. The contents of EXC-metals were markedly varied with the different extractability of various EXC-metal extractants used. The contents of EXC-Cd fraction were ranged from 2.0 to 74.3% of total Cd content in all of the metal spiked soils studied. The contents of EXC-Zn fraction extracted with the different EXC-extractants were varied with soil types, which were from 0.4 to 3.9% of total Zn in the calcareous soils, from 7.6 to 17.9% in the acidic soil, and from 13.6 to 56.8% in the peat soil. However, the contents of EXC-Cu fraction were relatively similar among the applications of different EXC-meal extractants, 0.2 to 2.1 % of total Cu, in all soils tested. Also, these varied amounts of EXC-metal fractions, especially Cd and Zn, seriously impacted the contents of subsequent metal fractions in the procedure. Furthermore, the CAB-Cd, -Cu, and -Zn fractions extracted by the buffered acetate solution were in critical problem. That is, the buffered acetate solution dissolved not only CAB-metals but also metals that bound or occupied to subsequent fractions, especially OXD-metal fraction, in both calcareous and non-calcareous soils. The erratic results of CAB-fraction also seriously impacted the amounts of subsequent metal fractions. Therefore, the conventional sequential extraction should be reconsidered theoretically and experimentally to quantify the target metal fractions or might be progressively discarded.

• 산업기술연구
• /
• 제27권B호
• /
• pp.235-243
• /
• 2007

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. The longer the interval, the higher the delay and the shorter the delay, the larger the fail of transfer request. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed.In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission timee. Therefore ESTEO could provide high packet transmission rate given large amount of packets.

• 한국정보전자통신기술학회논문지
• /
• 제17권2호
• /
• pp.99-107
• /
• 2024

최근 많은 산업 분야에서 진행되고 있는 디지털 트랜스포메이션은 데이터의 폭발적인 증가를 가져왔으며, 동시에 기업이 생성하고 처리해야 하는 데이터의 양을 기하급수적으로 증가시켰다. 이에 기업은 ERP 시스템을 활용해 실시간으로 대량의 데이터를 관리하고 분석하는 데 노력을 기울이고 있다. 그러나 기존 ERP 시스템에서 대량의 데이터를 처리하는 데 있어 비용 및 시간 문제가 발생하고 있어, 기존 시스템에서 데이터를 실시간으로 압축하고 저장할 수 있는 데이터 아카이빙 기술의 적용이 필수적이다. 이에 본 논문에서는 ERP 기반 실시간 데이터 아카이빙 기술에 관한 특허 데이터를 활용하여 대상 기술의 동향을 파악하고, 핵심 특허를 분석하여 이를 기반으로 신규 핵심특허를 창출하고자 한다.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1423-1436
• /
• 2010

The effects of meteorological and reclaiming conditions on the reduction of suspended particles are investigated using a computational fluid dynamics (CFD) model with the k-$\varepsilon$ turbulence closure scheme based on the renormalization group (RNG) theory. Twelve numerical experiments with different meteorological and reclaiming conditions are performed. For identifying the meteorological characteristics of the target area and providing the inflow conditions of the CFD model, the observed data from the automatic weather station (AWS) near the target area is analyzed. Complicated flow patterns such as flow distortion, horse-shoe vortex, recirculation zone, and channeling flow appeared due to the topography and buildings in the domain. Specially, the flow characteristics around the reclamation area are affected by the reclaiming height, reclaiming size and windbreak height. Reclaiming height affected the wind speed above the reclaiming area. Windbreak induces more complicated flow patterns around the reclaiming area as well as within the reclaiming area. In front of the windbreak, flow is distorted as it impinges on the windbreak. As a result, upward flow is generated there. Behind the windbreak, a secondary circulation, so called, a recirculation zone is generated and flow is reattached at the end of the recirculation zone (reattachment point). At the lower part of the recirculation zone, there is a reverse flow toward the windbreak. Flow passing to the reattachment point starts to be recovered. Total amounts of suspended particles are calculated using the frictional and threshold frictional velocities, erosion potential function, and the number of surface disturbance. In the case of a 10 m-reclaiming and northerly wind, the amount of suspended particles is largest. In the presence of 5 m windbreak, the friction velocity above the reclaiming area is largely reduced. As a result, the total amount of the suspended particles largely decreases, compared to the case with the same reclaiming and meteorological conditions except for the windbreak The calculated suspended particle amounts are used as the emission rate of the dispersion model simulations and the dispersion characteristics of the suspended particles are analyzed.