Objectives: This study was performed to set easily applicable portion sizes by sex and age for children at the Community Child Centers (CCC) in Korea. Methods: Considering the age and gender specific energy level at Target Patterns for children aged 6-18 years, which were suggested as a part of the 2010 Korean Food Guidance System (KFGS), we set three meal sizes. We reclassified the recommended daily servings of Grains, Meat fish eggs beans and Vegetables group at Target Patterns into three meal sizes, and then calculated the recommended serving per meal. Each proposed amount of food per meal was calculated based on serving size of foods commonly eaten at KFGS, which was then allocated to five meal components; rice, soup stew, protein and vegetable side-dishes and Kimchi. Each proposed amount of food per meal was applied to 173 menus' recipes from CANpro 3.0 as main ingredient's amounts. We cooked the 173 menus at the medium size and measured their weights after cooking. Results: Each recommended serving per meal was 0.75, 0.9 and 1.2 for Grains; 1.2, 1.6 and 2.4 for Meat fish eggs beans; 2, 2.4 and 2.8 for Vegetables by meal sizes. Among five meal components, the ratio of small and large to medium size was 1/5 less and 1/3 more for rice and 1/3 less and 1/3 more for soup stew, protein side-dish and Kimchi, respectively. We suggested the same amount for a vegetable side-dish to encourage vegetable intake. Proper portion sizes per meal of medium were rice 190 g, soup stew 210 g (solid ingredients 60 g), protein side-dish 100 g (meat eggs beans) and 70 g (fish), vegetable side-dish 80g and Kimchi 30 g. Conclusions: Proper portion size per meal suggested in this study may be useful at the CCC where dietitians are not available and the approach could be applicable to the other types of meal services.
In this paper, the image is received from the camera and the lane is sensed. There are various ways to detect lanes. Generally, the method of detecting edges uses a lot of the Sobel edge detection and the Canny edge detection. The minimum use of multiplication and division is used when designing for the hardware configuration. The images are tested using a black box image mounted on the vehicle. Because the top of the image of the used the black box is mostly background, the calculation process is excluded. Also, to speed up, YCbCr is calculated from the image and only the data for the desired color, white and yellow lane, is obtained to detect the lane. The median filter is used to remove noise from images. Intermediate filters excel at noise rejection, but they generally take a long time to compare all values. In this paper, by using addition, the time can be shortened by obtaining and using the result value of the median filter. In case of the Sobel edge detection, the speed is faster and noise sensitive compared to the Canny edge detection. These shortcomings are constructed using complementary algorithms. It also organizes and processes data into parallel processing pipelines. To reduce the size of memory, the system does not use memory to store all data at each step, but stores it using four line buffers. Three line buffers perform mask operations, and one line buffer stores new data at the same time as the operation. Through this work, memory can use six times faster the processing speed and about 33% greater quantity than other methods presented in this paper. The target operating frequency is designed so that the system operates at 50MHz. It is possible to use 2157fps for the images of 640by360 size based on the target operating frequency, 540fps for the HD images and 240fps for the Full HD images, which can be used for most images with 30fps as well as 60fps for the images with 60fps. The maximum operating frequency can be used for larger amounts of the frame processing.
In Korea, Private security companies has steadily grown and amounts to 2,051 places as of November 30, 2002. Private security in korea is carrying out firm name role assignment to have held the police and public peace environment change factors for a standard faithfully, and protects social a little property that is a basic purpose, and it is spare no efforts in loss prevention. In spite of numeral increase of private security companies, private security companies have many problem. Moreover, they mostly did not have any remarkable in-house expertises in their own business under tough conditions. Under the unfavorable circumstances including insufficient investment and education in private security guard, there have been actually little further studies on private security business in practices. So this study mainly focused on addressing the installation security business managed by authorized companies, which amount to 96%(1,963 companies) of total 2,051 domestic security companies. Furthermore, the study formulated and modeled a series of business procedures in private security companies. A series of business procedures of private security companies can be modeled as follows : Setting of a business scope and aim market ${\Rightarrow}$ Marketing, Contact from customers(On-line or Off-line) ${\Rightarrow}$ Diagnosis of security target ${\Rightarrow}$ Submission of security operational plan ${\Rightarrow}$ Estimation of security operational plan ${\cdot}$ decision ${\Rightarrow}$ Contract ${\Rightarrow}$ Employment, selection of security guards ${\Rightarrow}$ Nomination of security guard instructors ${\Rightarrow}$ Education & training of security guards ${\Rightarrow}$ subscribe to insurance of damage liability ${\Rightarrow}$ Commitment and placement of security guards ${\Rightarrow}$ Establishment and preparation of security planning ${\Rightarrow}$ Field management and procurement of relevant security service.
Objectives: The purpose of this study is to provide current the recent information on indium-related adverse health effects and the Korean indium-related industries. Methods: Peer review papers were searched in environmental, occupational and medical journals with the keyword of 'Indium' and 'ITO' and reviewed. To determine the indium related industries and indium consumption amounts, references and database were investigated and analyzed. In addition, field walk-through surveys and interviews were conducted in order to collect field data and to ascertain the field situation for the processes and industries. Results: A total of 10 cases of indium lung diseases have been reported in series since the first case reported in 2001. Seven cases were found in Japan, two cases in the United States, and one in China. No indium lung case has been reported yet in Korea, but it is believed that there are high potential risks among workers in indium-related industries. There are four categories in indiumrelated- industry; indium production and smelting, manufacturing of indium products such as ITO target, the production of thin films of flat panel display, and indium recovery industry. We found that all these types of industries are operating in Korea. Therefore, it is necessary for industrial hygienists to understand the processes and industries related to indium as well as the adverse health effects of indium. Conclusions: It was found that all four categories of indium-related industry from the indium production to recovery industry are active in Korea. However, the adverse health effects of indium are not well recognized. Therefore, it is believed that there is a high risks in indium-related industry, and it is necessary to make emergency interventions.
Impact resistance and weight are important features for ballistic materials. Kevlar fibres are the most widely reinforcement for military and civil systems due to its excellent impact resistance and high strength-to-weight ratio. Kevlar fibres or spectra fiber composites are used for designing personal body armour to avoid perforation. In this study, the ballistic impact behaviour of Kevlar/filled epoxy matrix is investigated. Three different fillers, nanoclay, nanocalcite and nanocarbon, were used in order to increase the ballistic impact performance of Kevlar-epoxy composite at lower weight. The filler, nanoclay and nanocalcite, content employed was 1 wt.% and 2 of the epoxy resin-hardener mixture while the nanocarbon were dispersed into the epoxy system in a 0.5%, 1% and 2% ratio in weight relating to the epoxy matrix. Specimens were produced by a hand lay-up process. The results obtained from ballistic impact experiments were discussed in terms of damage and perforation. The experimental tests revealed a number of damage mechanisms for composite laminated plates. In the ballistic impact test, it was observed whether the target was perforated completely penetrated at the back or not. The presence of small amounts of nanoclay and nanocalcite dispersed into the epoxy system improved the impact properties of the Kevlar/epoxy composites. The laminates manufactured with epoxy resin filled by 1 wt.% of nanoclay and 2 wt% nanocalcite showed the best performance in terms of ballistic performance. The addition of nanocarbon reduced ballistic performance of Kevlar-epoxy composites when compared the results obtained for laminates with 0% nanoparticles concentration.
Rehman, Aziz Ur;Ali, Farhad;Ali, Mashhood;Alam, Ibrar;Khan, Abdul Wali
Asian Pacific Journal of Cancer Prevention
/
제17권5호
/
pp.2485-2490
/
2016
The liver is one of the most common sites of cancer in the world, hepatocellular carcinoma (HCC) predominating. HCC is the sixth most common cancer and the third leading cause of cancer related death overall. Hepatitis C is a major risk factor and HCV is a rapid spreading virus which has become a problem globally, including in Pakistan. Interferon alpha therapy is used against HCV disease to regulate cell reproduction and to boost the immune system. In minute amounts interferon alpha is produced naturally by the immune system in HCV patients in response to hepatitis C virus and binds to receptors in the target cells and starts transcription of 20-30 genes due to which it develops an antiviral influence. Interferon is also administered artificially to overcome HCV disease and remove the biological effect of the virus from the infected site. The use of interferon or Peg-IFN plus Ribavirin treatment is also associated with adverse effects on body. For the current study, a convenient sample of 156 HCV positive patients of both males and females were taken. To collect blood CP and ALT, a reduction of level data and other important information were collected from the patients at regular intervals. Findings were 11.4 % in the red blood cells (RBC), 9.64 % in the total leukocyte count (WBC), 8.4 % in the hemoglobin levels (HB), 30.3 % in the platelet (Plt) count in both sexes. There was significant reduction in ALT levels due to Pegylated interferon plus ribavirin therapy. Hence strict haemotological monitoring of blood CP and ALT levels is necessary at regular intervals to reduce severe side effects which may lead to morbidity and mortality.
An attractive target for anti-herpes chemotherapy is the herpes simplex virus 1 (HSV-1) protease encoded by the UL26 gene. HSV-1 protease is essential for DNA packaging and virus maturation. To perform high throughput for potent inhibitors, the efficient production of larger amounts of highly purified enzyme and protease activity assay method must be established. In this report, expression in E. coli and purification of the protease gene of HSV-1 strain F was investigated. The protease gene was cloned pET28, and the nucleotide sequence of protease catalytic domain of HSV-1 compared strain F with other strains (KOS and CL101). In these results the F strain was different in base sequence. However, the amino acid sequence was identifical. The HSV-1 protease was purified with His-tagged affinity column. The analysis of HSV-1 protease activity was performed by high performance liquid chromatography.
Thermomechanical pulping process uses large amounts of energy, mostly electricity to run electrical facilities. Thermomechanical pulp (TMP) made from Pinus densiflora also has a big drawback that refining consumes 90 per cent of the total energy used in TMP process. This study explored to draw up a way to save refining energy through different thermal treatment at the stages of presteaming and refining. Presteaming temperature was $80^{\circ}C$, $100^{\circ}C$, and $120^{\circ}C$. After presteaming at each temperature, refining was carried out at $100^{\circ}C$, $120^{\circ}C$, and $140^{\circ}C$ respectively. In a presteaming stage, steaming temperature over $120^{\circ}C$ greatly contributed to the decrease of refining energy leading to earlier attainment of a target freeness, irrespective of refining temperature. In addition, NaOH treatment with presteaming enhanced better development of fiber properties during refining than presteaming without NaOH. High temperature refining at $140^{\circ}C$ produced a high strength paper, and wood chips treated by alkali responded better to refining than at over $120^{\circ}C$. Improved softening effect on wood chips led to the decrease in shives contents but it gave no effect on pitch contents of TMP.
유비쿼터스 네트워크와 더불어 무선 센서 네트워크는 다양한 분야에 응용되고 있다. 무선 센서 네트워크의 노드들은 목표 지역에 비치되어 동작하게 되는데 그 공급원으로 대부분 배터리를 사용하고 있다. 배터리는 센서 네트워크의 응용에 제한된 에너지를 가짐으로써 교체나 충전 등의 어려움을 가진다. 따라서 센서노드의 수명을 연장시키기 위해 주변 환경으로부터의 에너지 하베스팅 기술 등이 연구 개발되고 있다. 특히 태양에너지는 다른 환경 에너지에 비하여 방대하고 짧은 시간에 많은 에너지를 얻을 수 있어 최근 널리 연구되어지고 있다. 본 연구에서는 Solar Cell을 이용하여 배터리 충전 및 센서노드를 구동하는 실험을 하고, 수집된 데이터와 배터리의 전압에 대한 분석을 통하여 센서노드를 구동하기 위해 필요한 배터리 충전시간과 센서노드 농작 가능성에 대하여 확인하였다.
가스스프링은 가스가 압축될 때 가지게 되는 압력을 스프링과 같이 사용하는 형태로, 광범위한 산업분야에 사용되고 있고 그 수요 또한 증가하고 있다. 이 가스스프링은 압축 스프링과 인장 스프링으로 나뉠 수 가 있는데, 압축 스프링과 달리인장 스프링의 경우는 피스톤 속도 제어에 대한 연구가 많이 이루어지지 않았다. 본 연구에서는 2중 실린더 구조를 갖는 인장 가스스프링에서의 압력 손실 계산을 통하여 피스톤 반발압력의 크기를 이론적으로 예측하였고, 피스톤과 실린더 사이의 마찰이 작은 경우와 큰 경우에 대하여 피스톤의 실제 거동을 모사해 보았다. 수치해석을 위해서는 유동해석분야에서 가장 널리 사용되고 있는 FLUENT를 이용하였고, 피스톤의 거동을 모사하기 위하여 FLUENT에서 제공하는 6-DOF 모델과 사용자정의함수(User Defined Function)를 사용하였다. 격자는 Layering 기법만으로도 Dynamic mesh가 성공적으로 구현되도록 피스톤 전후의 유동영역을 따로 분할하여 다른 형태의 격자를 생성하였다. 해석 결과 두 경우 다 최종적으로는 목표로 하는 속도로 피스톤이 복귀하는 결과를 보였으나, 최종 속도에 도달하는 과정에서 다른 차이를 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.