• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.87-95
• /
• 1992

The electrical characteristics of Al/TaS12TOS15T/SiOS12T/Si metal insulator-semiconductor (MIS) capacitors were studied. Tantalum pentoxide thin films on SiOS12T/p-Si substrate have been prepared by thermal oxidation at 450-$600^{\circ}C$ of sputter deposited tantalum films. Composition and structures of the tantalum oxide films were examined by AES and XRD. From the C-V analysis, dielectric constant of TaS12TOS15T which were oxidized at 55$0^{\circ}C$ for 1h in OS12T were 18-23, the value depending on the oxidation and annealing temperature. The leakage current density was found to be about 10S0-10T-10S0-9T A/cmS02T at an applied electric field of 1 MV/cm. The dielectric breakdown strength of the tantalum oxide films annealed at 100$0^{\circ}C$ were in the range from 2.5MV/cm to 2.8 MV/cm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.807-811
• /
• 2003

We investigated the electrical characterisitics of T $a_2$ $O_{5}$ (tantalum pentoxide) film and Ti-O/T $a_2$ $O_{5}$ film deposited on $Al_2$ $O_3$based substrate. Ta (tantalum) electrode and $Al_2$ $O_3$ substrate was used for the purpose of simplifying the manufacturing process in IPD's (integrated passive devices). Dielectric materials (T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ films) deposited on Ta/Ti/A $l_2$ $O_3$ were annealed at 700 $^{\circ}C$ for 60 sec. in vacuum. The XRD results showed that as-deposited T $a_2$ $O_{5}$ film possessed amorphous structure, which was transformed to crystallines by rapid thermal heat treatment. We compared the lnJ- $E^{{\frac}{1}{2}}$, C-V, C-F of both as-deposited and annealed dielectric thin films deposited on Ta bottom electrode. From this results, we concluded that the leakage current could be reduced by introducing Ti-O buffer layer and conduction mechanisms of T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ could be interpreted appropriately by Schottky emission effect.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.57-57
• /
• 2003

High dielectric constant materials (high K) have attracted a great deal of interest because of the dramatic scaling down of DRAM capacitor reaching its physical limit in terms of reduction of thickness. Among high-K materials that can replace silicon dioxide, tantalum pentoxide (Ta2O5) thin film, with their high dielectric constant (∼25) and good step coverage, is the candidate of choice.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• 전자공학회논문지 IE
• /
• v.43 no.1
• /
• pp.1-4
• /
• 2006

The characteristics of polymeric thin-film transistors(TFTs) can be controlled by chemically modifying the surface of the gate dielectric prior to the organic semiconductor. The chemical treatment consists of derivative the tantalum pentoxide($Ta_2O_5$) surface with organic materials to form self-assembled monolayer(SAM). The deposition of an octadecyl-trichlorosilane(OTS), hexamethy-ldisilazone(HMDS), aminopropyltreithoxysilane(ATS) SAM leads to a mobility of $0.01\sim0.06cm2/V{\cdot}s$ in a poly-3-hexylthiophene(P3HT) conjugated polymer. The mobility enhancement mechanism is likely to involve molecular interactions between the polymer and SAM. These result can be used for polymer TFT's dielectric material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.619-619
• /
• 2013

The interfacial state between $Ta_2O_5$ and a Si substrate during the growth of $Ta_2O_5$ films by atomic layer deposition (ALD) was investigated using in-situ synchrotron radiation photoemission spectroscopy (SRPES). A newly synthesized liquid precursor Ta($N^tBu$) $(dmamp)_2Me$ was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. After each half reaction cycle, samples were analyzed using in-situ SRPES under ultrahigh vacuum at room temperature. SRPES analysis revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almostdisappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicate was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset between $Ta_2O_5$ and the Si substrate was 3.22 eV after 3.0 cycles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.12
• /
• pp.1016-1022
• /
• 2001

This study presents the microstructure-electrical property relationship of reactive-sputtered Ta$_2$O$_{5}$ MIM capacitor structure processed by annealing in a vacuum and $O_2$ ambience. A microstructural investigation showed the existence of amorphous phase in as-deposited condition and the formation of preferentially oriented-Ta$_2$O$_{5}$ in $700^{\circ}C$ annealing. On annealing under the $O_2$ atmosphere, the Ta$_2$O$_{5}$ film exhibited the trend of its composition\`s approaching to stoichiometry from off-stoichiometry, analyzed by EPMA, the leakage current decrease and the enhanced temperature-capacitance characteristic stability. In the case of low temperature vacuum-annealing treatment, the leakage current behavior was stable irrespective of applied electric field. In the high temperature-annealed film at a vacuum condition, the electrical properties was observed to deteriorate. The results state that in Ta$_2$O$_{5}$ film annealed at $O_2$ atmosphere, gives rise to improvement of electrical characteristics in the capacitor were improved by reducing oxygen-vacancy and dandling Ta-O bond.-O bond.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1125-1128
• /
• 2002

Tantalum pentoxide (Ta$_2$O$\sub$5/) is a candidate for use in metal-insulator-metal diode in switching devices for active-matrix liquid-crystal displays. The MIM diode with very low threshold voltage and perfect symmetry was fabricated. High quality Ta$_2$O$\sub$5/ thin films were obtained by using an anodizing method. Rutherford backscattering spectroscopy, transmission electron microscope observations, auger electron spectroscopy, ellipsometry measurements, and electrical measurements, such as current - voltage(I-V) measurements were performed to investigate Ta$_2$O$\sub$5/ films and their reliability and indicated that the obtained TaOx thin films were reliable Ta$_2$O$\sub$5/ films for the applications. Furthermore, in this paper, we discuss the effects of top-electrode metals and annealing conditions. The conduction mechanism of the leakage current and the symmetry characteristics related to the Schottky emission and Poole-Frankel effect are also discussed using the results of electrical measurements and conduction barrier theory.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.310-315
• /
• 1993

The effects of RT A treatment on the breakdown strengths were studied for tantalum pentoxide(${Ta_2}{O_5}$) films prepared by thermal oxidation of dc-sputtered Ta(400$\AA$) on p-type (100) Si wafer. While the relative dielectric constants of the RT A -treated specimens were not remarkably affected, the breakdown strengths of the RTA-treated specimens were greatly changed by RTA temperature and time. After the RTA treatment, the breakdown strengths of the specimens RTA-treated at the temperature below the crystallization temperature were increased to 5.4MV /cm, while those of the specimens RTA -treated at the temperature above it were decreased to 0.5MV /cm. RTA time-independence of the flat-bant voltage shift refleted that the RT A post-annealing effects on the breakdown strengths were not due to the interface reaction between the ${Ta_2}{O_5}$ layer and the Si substrate but, through the RBS analysis, to densification of the ${Ta_2}{O_5}$ films.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.3
• /
• pp.126-132
• /
• 2002

The origin of image-sticking in metal-insulator-metal type thin-film diode liquid crystal displays(TFD-LCDs) is the asymmetric current-voltage(I-V) characteristic of TFD element. We developed that TFD-LCDs have reduced-image-sticking. Tantalum pentoxide(Ta$_2$O$\sub$5/) is a candidate for use in metal-insulator-metal(MIM) capacitors in switching devices for active-matrix liquid crystal displays(AM-LCDs). High quality Ta$_2$O$\sub$5/ thin films have been obtained from anodizing method. We fabricated a TFD element using Ta$_2$O$\sub$5/ films which had perfect current-voltage symmetry characteristics. We applied novel process technologies which were postannealed whole TFD element instead of conventional annealing to the fabrication. One-Time Post-Annealing(OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and upper metal are annealed at one time. Futhermore, in this paper, we discussed the effects of top-electrode metals and annealing conditions.