• Animal cells and systems
• /
• 제2권4호
• /
• pp.477-481
• /
• 1998

Previous studies have postulated that isometric animals exert similar locomotory capacity (speed, distance) because the amount of energy available for the motion would be the same regardless of body mass (m). To test propriety of this theory, we examined body shape and take-off potential of two frog species, Rana nigromaculata (powerful jumpers) and Bombina orientalis (slow hoppers). Morphological measurements included thigh muscle mass (indicative of total muscle force), hindlimb length (L, determining acceleration distance), and interilial width (shaping take-off motion). To gauge locomotory capacity, take-off speed (v) and take-off angle ($\theta$) were measured from video analyses, and jump distance (R) and take-off Power ($P_{t}$ ) were calculated from equations $R=V^{2}sin2\theta/g$ and ($P_{t}$＝$㎷^{3}/2L$(where g is the gravitational constant). Scaling exponents of morphometric variables for both species were 0.96-1.11 for thigh muscle mass, 0.28-0.29 for hindlimb length, and 0.30-0.36 for interilial width. Scaling exponents of locomotory performance for the two species were -0.01-0.14 for take-off speed, 0.24-0.31 for jump distance, and 0.66-0.84 for take-off power. The results demonstrate that the frogs of this study showed isometric body shape within species, but that take-off response changed allometrically with body mass, indicating that these data did not fully support the previous proposition. An exception was found in take-off speed of B. orientalis, in which the speed changed little with body mass (slope＝-0.01). These findings suggest that the energy availability approach did not properly explain the apparent allometric relations of the take-off response in these animals and that an alternative model such as a power production approach may be worth addressing.

• The Korean Journal of Zoology
• /
• 제39권2호
• /
• pp.132-138
• /
• 1996

To learn how maximal locomotory speed of animals is defined in terms of hindlimb structure and muscle contractile function, take-off speed, hindlimb length, thigh muscle mass, shortening velocity and power of the sastrocnemius muscle were measured with one fast species, Rono nigromaculota and one relatively slowresponding species, Bombina orientalis. Take-off speed (m.sec-1) was greater in R. nigromoculata $(2.4\pm0.2SD, $ n: 14) than in the Bombino $(1.6\pm0.1SD, $ n=8). Stvle of the take-off response was a long-iump type in the Rano and a short-ranged hopping in the Bombing. Faster take-off capacity of the ranid frogs was supported by the longer hindlimb length (relative to body length) and the more massive thigh muscles (relative to body mass), compared to the Bombina. Further, the ranids exhibited faster maximal shortening velocity and Breater maximal power generateion than the Bombina [Vmax $(ML.sec-1)=11.79\pm1.69SD$ for the Runa and $9.74\pm1.27SD$ for the Bombina; Pmax $nW.kg-1)=222.42\pm42.42SD$ for the Rono and $169.03\pm34.52SD$ for the Bombinal. With more massive thigh muscles and greater mechanical power, the ranids would generate greater total power and thus higher energy release per unit time to muscle tissues for the burst take-off. As a consequence, biomechanical properties seen in the ranids seem to be more effective for frost take-off than in the Bombina.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.142-143
• /
• 2008

In the present work, high-speed video images of the ground take-off flight of a live butterfly were captured and their dynamic motions during the first full-stroke were analyzed. To capture the dynamic images of the take-off motion, the experimental setup consisted of a high-speed camera, a Xenon lamp as a light source and a transparent chamber of $15^W{\times}15^L{\times}17^H$ $cm^3$ in physical size. The ambient temperature and supplementary lighting devices were precisely controlled. The weight and wing span of the butterfly tested in this study was 104 mg and 63.14 mm, respectively. The ground take-off images were captured with 4000 fps with a spatial resolution of (1024${\times}$512) pixels. The period of the first full-stroke was 80.5ms and the flapping speed of downstroke was 2 times faster than that of upstroke. As a result, butterflies used the fling and near-clap motion to generate lifting force and an interesting take-off behavior of early pronation and downstroke was observed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.211-216
• /
• 1993

The successful design of several types of motorcycle power take off (M-pto) has opened possibilities for the use of a range of attachments matched to the power of the more popular motorcycle models in Asia. This paper reports on the implementation of the motorcycle power-take-off for low-speed and high speed applications utilizing some existing IRRI machines.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.300-306
• /
• 2018

In this study, the performance of foil thrust bearings was investigated by performing bearing take-off and load capacity tests, using an in-house designed and manufactured vertical bearing test rig. The mean take-off rotational speed and maximum load capacity of the bearing specimen were ~18,000 rpm and ~80 kPa, respectively. The vertical bearing test rig was observed to yield higher coefficients of friction and frictional torques than a horizontal bearing test rig under identical test conditions. This was a result of its structural characteristics, in that the bearing specimen is placed atop the thrust runner, which keeps it from being separated from the runner after the bearing take-off. In addition, bearing take-off was observed at a higher runner rotational speed as this structure keeps air from flowing between the top foil and runner surfaces, which requires a higher runner speed. The parallel alignment between the bearing specimen and runner surfaces can be maintained within a certain range more easily in a vertical test rig than in a horizontal test rig. Because of these advantages, Korean Industrial Standard, KS B 2060, recommends a vertical bearing test rig as the standard test device for foil thrust bearings.

• Journal of Engineering Education Research
• /
• 제17권5호
• /
• pp.17-22
• /
• 2014

Unmanned aerial vehicles (UAVs) that have been recently commercialized can largely be divided into fixed-wing aircraft and rotor aircraft by their styles and flight characteristics. Although the fixed-wing aircraft represents higher power efficiency, higher speed, longer flight distance and larger loading weight than the rotor aircraft, they have a disadvantage of requiring a space for take-off and landing. On the other hand, the rotor aircraft can implement vertical take-off and landing (VTOL) and represents various flight modes (hovering, steep bank turns and low-speed flights). But they require both precision take-off control and attitude control. In this study, we used a quad-tilt rotor UAV to combine advantages in both the fixed-wing aircraft and the rotor aircraft. The quad-tilt rotor (QTR) system was designed and constructed by adding a tilt device with a servo motor to a general quad-rotor vehicle.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.120-131
• /
• 2016

The full results of troubleshooting process related to the flight control system of a tilt-rotor type UAV in the flight tests are described. Flight tests were conducted in helicopter, conversion, and airplane modes. The vehicle was flown using automatic functions, which include speed-hold, altitude-hold, heading-hold, guidance modes, as well as automatic take-off and landing. Many unexpected problems occurred during the envelope expansion tests which were mostly under those automatic functions. The anomalies in helicopter mode include vortex ring state (VRS), long delay in the automatic take-off, and the initial overshoot in the automatic landing. In contrast, the anomalies in conversion mode are untrimmed AOS oscillation and the calibration errors of the air data sensors. The problems of low damping in rotor speed and roll rate responses are found in airplane mode. Once all of the known problems had been solved, the vehicle in airplane mode gradually reached the maximum design speed of 440km/h at the operation altitude of 3km. This paper also presents a comprehensive detailing of the control systems of the tilt-rotor unmanned air vehicle (UAV).

• Journal of Power Electronics
• /
• 제7권1호
• /
• pp.81-88
• /
• 2007

This paper presents a new approach to the automatic control of the turn-off angle used to excite the Switched Reluctance Motor (SRM) employed in electric vehicles (EV). The controller selects the turn-off angle that supports and improves the performance of the motor drive system. This control scheme consisting of classical current control and speed control depends on a lookup table to take the best result of the motor. The turn-on angle of the main switches of the inverter is fixed at $0^{\circ}C$ and the turn-off angle is variable depending on the reference speed. The motor, inverter and control system are modeled in Simulink to demonstrate the operation of the system.

• Korean Journal of Applied Biomechanics
• /
• 제18권1호
• /
• pp.53-62
• /
• 2008

The purpose of this research was to analyze the kinematics of the 205B movement in platform diving. For the experiment, 2 athlete from the national diving team were chosen as the subject and two S -VHS video cameras were used. For this diving players preparing for the olympics participated. It was shown that the mean total took $1.112{\pm}0.12s$. In order to perform better, the divers time must be increased, at take off and rotation must be done high up and the horizontal distance must be shorted to main entrance of the water. To enter the water safely, the jump has to be high, the horizontal speed slow and the vertical speed as fast as possible. At E1 the lower limbs change in speed should decrease and after the rotation begins at E2. At take off, the jump is more important than the rotation for the performance of the dive. At take off, the trunk angular velocity was high, and this was needed to jump high for moment of inertia for rotation because for efficient jumping the upper body has to spread out and increase the height of the center of mass.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.477-482
• /
• 2012

This paper describes a new rotor position sensorless control method for SRM drives based on an improved simplified flux linkage method. In the traditional simplified flux linkage method, every phases take turns conduction and current chopping control method is used. Every phases take turns conduction means turning on the incoming working phase while turning off the working phase. This conduction mode causes coupling between turn-on and turn-off angles, which goes against optimal efficiency or torque ripple minimization with sensorless speed control. In the improved simplified flux linkage method, turn-off angle is calculated by flux loop, the turn-on angle can be given arbitrarily and has no relations with the turn-off angle, and the current chopping control method is used. The speed and rotor position can be estimated then. Finally, a sensorless SRM speed control system and an experiment platform with DSP are built and validity of this method is confirmed.