• 한국수소및신에너지학회논문집
• /
• 제34권3호
• /
• pp.267-273
• /
• 2023

As the impacts of global climate change become increasingly apparent, the reduction of carbon emissions has emerged as a critical subject of discussion. Nuclear power has garnered attention as a potential carbon-free energy source; however, the rapidity of load following in nuclear power generation poses challenges in comparison to fossil-fueled methods. Consequently, power-to-gas systems, which integrate nuclear power and hydrogen, have attracted growing interest. This study presents a preliminary design of a very high temperature reactor (VHTR) integrated blue hydrogen production process utilizing DWSIM, an open-source process simulator. The blue hydrogen production process is estimated to supply the necessary calorific value for carbon capture through tail gas combustion heat. Moreover, a thermodynamic assessment of the main recuperator is performed as a function of the helium flow rate from the VHTR system to the blue hydrogen production system.

• Journal of Ginseng Research
• /
• 제41권4호
• /
• pp.556-565
• /
• 2017

Background: Recent studies have revealed that the properties Traditional Chinese Medicine is mostly associated with are substance and energy metabolism. Our study aimed to compare the effect of red ginseng (RG) (warm property) and ginseng leaves (GL; cold property) on the substance and energy metabolism of rats with hypothyroidism. Materials and methods: Rats were administered propylthiouracil intraperitoneally for 20 d to cause hypothyroidism. The reference group was orally administered Aconiti Lateralis Radix Praeparaia [FZ (Fuzi in Chinese)], while both the RG and GL groups were orally administrated crude drugs. The rectal, tail, toe, and axilla temperature of the rats were assayed every 3 d. Oxygen consumption, carbon dioxide production, heat production, and energy expenditure were measured via TSE phenoMaster/LabMaster animal monitoring system. Adenosine monophosphate-activated protein kinase, $Na^+-K^+$-ATPase, fumarase, pyruvic acid and cyclic adenosine monophosphate/cyclic guanosine monophosphate were determined. Results: The lower levels of triiodothyronine, tetraiodothyronine, and thyrotropin-releasing hormone and the higher level of thyroid stimulating hormone revealed the successful establishment of a hypothyroidism model. Oxygen consumption, carbon dioxide production, heat production, and energy expenditure in the FZ and RG groups were obviously increased. The activity of $Na^+-K^+$-ATPase and fumarase in the FZ and RG groups was significantly increased. The cyclic adenosine monophosphate/cyclic guanosine monophosphate level in the FZ and RG groups was increased, while the GL group showed the opposite. Conclusion: Our research provides a new way to explore the efficiency of Chinese medicine on the basis of the relationship between drug property and effects on substance and energy metabolism.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.194-194
• /
• 2017

Camelina (Camelina sativa L.) is a potential bio-energy crop that has short life cycle about 90 days and contains high amount of unsaturated fatty acid which is adequate to bio-diesel production. Enhancing environmental stress tolerance is a main issue to increase not only crop productivity but also big mass production. CsRCI2s (Rare Cold Inducible 2) are cold and salt stress related protein that localized at plasma membrane (PM) and assume to be membrane potential regulation factor. These proteins can be divide into C-terminal tail (CsRCI2D/E/F/G) or no-tail group (CsRCI2A/B/C/H). However, function of CsRCI2s are less understood. In this study, physiological responses and functional characterization of CsRCI2s of Camelina under salt stress were analyzed. Full-length CsRCI2s (A/B/E/F) and CsPIP2;1 sequences were confirmed from Camelina genome browser. Physiological investigations were carried out using one- or four-week-old Camelina under NaCl stress with dose and time dependent manner. Transcriptional changes of CsRCI2A/B/E/F and CsPIP2;1 were determined using qRT-PCR in one-week-old Camelina seedlings treated with NaCl. Translational changes of CsRCI2E and CsPIP2;1 were confirmed with western-blot using the antibodies. Water transport activity and membrane potential measurement were observed by cRNA injected Xenopus laevis oocyte. As results, root growth rate and physiological parameters such as stomatal conductance, chlorophyll fluorescence, and electrolyte leakage showed significant inhibition in 100 and 150 mM NaCl. Transcriptional level of CsPIP2;1 did not changed but CsRCI2s were significantly increased by NaCl concentration, however, no-tail type CsRCI2A and CsRCI2B increased earlier than tail type CsRCI2E and CsRCI2F. Translational changes of CsPIP2;1 was constitutively maintained under NaCl stress. But, accumulation of CsRCI2E significantly increased by NaCl stress. CsPIP2;1 and CsRCI2A/B/E/F co-expressed Xenopus laevis oocyte showed decreased water transport activity as 61.84, 60.30, 62.91 and 76.51 % at CsRCI2A, CsRCI2B, CsRCI2E and CsRCI2F co-expression when compare with single expression of CsPIP2;1, respectively. Moreover, oocyte membrane potential was significantly hyperpolarized by co-expression of CsRCI2s. However, higher hyperpolarized level was observed in tail-type CsRCI2E and CsRCI2F than others, especially, CsRCI2E showed highest level. It means transport of $Na^+$ ion into cell is negatively regulated by expression of CsRCI2s, and, function of C-terminal tail is might be related with $Na^+$ ion influx. In conclusion, accumulation of NaCl-induced CsRCI2 proteins are related with $Na^+$ ion exclusion and prevent water loss by CsPIP2;1 under NaCl stress.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.8-16
• /
• 2014

Torque control method and turn of nut method are specified as clamping method of high strength bolts in the steel construction specifications. Quality control of torque coefficient is essential activity because torque control method, which is presently adopted as clamping method in domestic construction sites, is affected by variation of torque coefficient. The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on the environmental factors and temperature variables despite the break of the pin tail.This study was focused to evaluate the effect of environmental factors and errors of installing bolts during tightening high strength bolts. The environmental parameters were composed of 'wet' condition, 'rust' condition, 'only exposure to air' condition. And the manufacture of trial product was planned to identify the induced force into the bolts. The algorithm for a trial product was composed of the relation between electricity energy taken from torque shear wrench and tension force from hydraulic tension meter.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권9호
• /
• pp.1378-1386
• /
• 2020

Objective: Chinese indigenous sheep breeds can be classified into the following three categories by their tail morphology: fat-tailed, fat-rumped and thin-tailed sheep. The typical sheep breeds corresponding to fat-tailed, fat-rumped, and thin-tailed sheep are large-tailed Han, Altay, and Tibetan sheep, respectively. Detection of copy number variation (CNV) and selection signatures provides information on the genetic mechanisms underlying the phenotypic differences of the different sheep types. Methods: In this study, PennCNV software and F-statistics (F_ST) were implemented to detect CNV and selection signatures, respectively, on the X chromosome in three Chinese indigenous sheep breeds using ovine high-density 600K single nucleotide polymorphism arrays. Results: In large-tailed Han, Altay, and Tibetan sheep, respectively, a total of six, four and 22 CNV regions (CNVRs) with lengths of 1.23, 0.93, and 7.02 Mb were identified on the X chromosome. In addition, 49, 34, and 55 candidate selection regions with respective lengths of 27.49, 16.47, and 25.42 Mb were identified in large-tailed Han, Altay, and Tibetan sheep, respectively. The bioinformatics analysis results indicated several genes in these regions were associated with fat, including dehydrogenase/reductase X-linked, calcium voltage-gated channel subunit alpha1 F, and patatin like phospholipase domain containing 4. In addition, three other genes were identified from this analysis: the family with sequence similarity 58 member A gene was associated with energy metabolism, the serine/arginine-rich protein specific kinase 3 gene was associated with skeletal muscle development, and the interleukin 2 receptor subunit gamma gene was associated with the immune system. Conclusion: The results of this study indicated CNVRs and selection regions on the X chromosome of Chinese indigenous sheep contained several genes associated with various heritable traits.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.1-8
• /
• 2005

Increase in the utilization rate of recycled paper and closing level of papermaking system increased the problem associated with stickies that include decrease in process runnability and product quality. It is required to establish a process for removing the micro stickies to solve the problems associated with stickies. In this study, the application of flotation process as a method to remove micro stickies was examined. Model micro stickies (MMS) were prepared using microcrystalline cellulose (MCC) and pressure sensitive adhesives (PSA), and the influence of three nonionic surfactants on the removal efficiency of MMS from flotation process was examined. Also the effect of surfactants on the deposition of micro stickies that remaining in the papermaking wet end onto wire was examined. Removal efficiency of MMS by flotation was increased when the proportion of nonionic surfactant with propylene oxide (PO) type hydrophilic tail was increased and stock pH was 7. It was suggested that this nonionic surfactant minimized the increase of surface energy of hydrophobic MMS. The MMS with high hydrophobicity remaining in the papermaking system, however, would cause more serious deposition problems on papermaking wet end. Therefore, it is of great importance to increase the removal efficiency of MMS in flotation process for the prevention of papermaking system contamination caused by stickies deposition.

• 에너지공학
• /
• 제12권1호
• /
• pp.29-34
• /
• 2003

압력파의 일종인 열음향파는 압축성유체를 급속히 가열 또는 냉각하는 경계면 근처에서 유체가 순간적으로 압축 및 팽창하는 경우에 발생하는 현상으로 자연대류가 일어나지 않는 우주공간에서는 매우 중요한 열전달 메커니즘이다. 본 연구에서는 공기로 채워진 공간에서 급속한 가열에 의하여 발생한 열음향파의 전달특성을 수치적인 방법에 의하여 평가하고자 유한체적법을 기반으로 비정상 지배방정식을 이산화하였으며, PISO알고리즘과 2계 상향기법을 적용하여 해석을 수행하였다. 안정적인 수치해는 50 $\times$ 800 개의 셀과 1 $\times$ $10^{-9}$ 시간간격을 적용하여 얻을 수 있었으며, 생성된 열음향파는 유체 속을 통과하면서 점성과 열소산에 의하여 점점 감쇠하여 가는 경향을 보였다. 생성된 압력파는 날카로운 전단과 점점 감소하여 길게 늘어지는 후단부를 갖는 형상을 보였다.

• 로봇학회논문지
• /
• 제8권4호
• /
• pp.247-255
• /
• 2013

This paper shows the development of a snake robot (KAEROT-snake V) which consists of 16 1-DOF actuator modules and head module. The modules are connected serially and the joint axis of each module is rotated by $90^{\circ}$ with respect to the previous joint so that the snake robot can move in the 3D space. A tail actuator module includes slip-ring and metal connector. KAEROT-snake IV developed in prior research could move in the 3D space and climb up in a narrow pipe. But its design was not appropriate to the unstructured tough environment and its speed was somewhat slow. A new actuator module is designed to enclose all parts of the module so that any wire is not exposed. The size and weight of the new module was slightly reduced. And the rotation speed and torque of the joint was increased by about twice when compared with pre-module. An embedded controller was developed so small that it can be mounted inside the module. The performance of the developed robot was demonstrated through various locomotion experiments.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3317-3322
• /
• 2011

This study examines the photoelectric conversion efficiency of dye-sensitized solar cells (DSSCs) when nanometer-sized Zr (0.1, 0.5, and 1.0 mol %)-$TiO_2$ prepared using a solvothermal method is utilized as the working electrode material. The particle sizes observe in the transmission electron microscopy (TEM) images are < 30 nm in all samples. The absorption band is slightly broadened at the tail for the 0.1 mol % Zr-$TiO_2$, and the intensity of the photoluminescence (PL) curves of the Zr-incorporated $TiO_2$ is significantly smaller than that of the pure $TiO_2$. Compared to that using pure $TiO_2$, the energy conversion efficiency is enhanced considerably by the application of Zr-$TiO_2$ in the DSSCs to approximately 6.17% for 0.5 mol % Zr-$TiO_2$ with the N719 dye (10.0 ${\mu}m$ film thickness and 5.0 mm ${\times}$ 5.0 mm cell area) under 100 mW/$cm^2$ of simulated sunlight.

• 제어로봇시스템학회논문지
• /
• 제16권8호
• /
• pp.799-803
• /
• 2010

Recently, there is a rising interest on studying bio-inspired robotic fish because of real fish's great maneuverability and high energy efficiency. However, the researches about the robotic fish have not been done so much and there are still lots of problems to use them in the real environment such as in the river. This paper describes a bio-inspired robotic fish 'Ichthus' which is developed in KITECH and has 3 DOF propulsive mechanism. We develop the dynamic motion equation of 'Ichthus' in the underwater environment and analyze response characteristics of 'Ichthus' according to the input parameters of tail fin's amplitude and oscillation frequency. Then we propose control parameters at the various velocities. These parameters are useful to increase energy efficiency and it can be used when the fish robot moves in the real environment, for example, we can propose proper amplitude and oscillation frequency when the fish robot passes through the narrow space between obstacles.