• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.56-60
• /
• 1999

This study is performed to evaluate the engineering properties of permeable polymer concrete. The following conclusions are drawn. 1. The unit weight is $1,883kgf/m^3$, which is decreased 18% than that of the normal cement concrete. 2. The strength of permeable polymer concrete is achieved that it is 170% by tensile strength and 240% by bending strength than that of the normal cement concrete, respectively. 3. The water permeability is $5.917l/cm^2/h$. This concrete can be used to the structures which need water permeability.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.418-424
• /
• 1984

Rate constants for the hydrolysis of cinnamonitrile in the concentration range of 1 ∼ 5M of perchloric acid at 25$^{\circ}$C have been determined by UV spectrophotometry and from the Bunnett equations, hydration parameters (${\omega}$ = 9.8, ${\omega}^*$ = 0.42 & ${\phi}$=1.6) were obtained. CNDO/2 MO calculations were performed to determine relative stability, net charges, and overlap population of various conformational isomers. The results show that the (E)-planar is more stable than the (Z)-planar and protonation is favored on the nitrogen atom. On the basis of above findings, the acid hydrolysis is initiated by the protonation of the nitrogen atom of cinnamonitrile and then water molecule acting as nucleophile and as a proton transfer agent in the rate determining step. In the transition state of the acid hydrolysis, nucleophilic addition of water molecule occurs by sigma approach to the positively charged $C_7({\alpha}$) atom of the conjugate acid. As the results, we may conclude that the hydrolysis of cinnamonitrile in the strong acidic media proceeds through the A-2 type mechanism.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.243-248
• /
• 2006

Recently, China opened Yangshan port and provides a variety of benefits for shipping companies. Japan plans to reduce logistics costs and improve efficiency through the established 'super major ports' project. According to the 'hub and spokes' system, the number of direct calls toward North-Chinese ports are increasing. This changing environment has negative effects on the amount of transshipment cargos in Korean ports. In order to make a hub port of a domestic port, it is necessary to develop northeast Asian Feeder networks. Therefore, this paper analyzes the structure of northeast Asian feeder networks through the case study of European feeder networks strategy. Finally, we suggests the plans to reinforce feeder networks, which are strategic terminal operation, strategic alliances between shipping companies and port co-operation, for win-win strategy in the competitive northeast Asian market.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.269-276
• /
• 2016

Internet of Things (IoT) is based on wireless networks being able to connect things and people on a large scale. In the IoT environment, reliable broadcast plays an important role to distribute data to a large number of devices. Energy harvesting from a surrounding environment is a key technique to achieve a sustainable IoT network. In IoT networks, a problem of transmission errors and energy shortage should be mitigated for reliable broadcast. In this paper, we propose an energy-efficient and reliable broadcast method to consider packet errors and energy consumption in the environment where a large number of nodes are connected. The proposed scheme can improve data restoration probability by up to 15% and reduce energy consumption by up to 17%.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.24-27
• /
• 2011

Effect of substitution of Mn for Ni on transformation behavior, shape memory characteristics and superelasticity of Ti45Ni-5Cu alloy has been investigated by means of electrical resistivity measurements, X-ray diffraction, thermal cycling tests under constant load and tensile tests. The one-stage B2-B19' transformation occurred when Mn content was 0.5 at%, above which the two-stage B2-B19-B19' transformation occurred. A temperature range where the B19 martensite exists was expanded with increasing Mn content because decreasing rate of Ms (60 K / % Mn) was larger than that of Ms' (40 K / % Mn). Ti-(45-x)Ni-5Cu-xMn alloys were deformed in plastic manner with a fracture strain of 60 % ~ 32 % depending on Mn content. Clear superelasticity was found in fully annealed Ti-(45-x)Ni-5Cu-xMn alloys with Mn content more than 1.0 at%, which was ascribe to a solid solution hardening by substitution of Mn for Ni.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.28-31
• /
• 2011

Transformation behavior and shape memory characteristics of Ti-(45-x)Ni-5Cu-xCr (x=0.5-2.0) alloys have been investigated by means of electrical resistivity measurements, differential scanning calorimetry, X-ray diffraction and thermal cycling tests under constant load. Two-stage B2-B19-B19' transformation occurred in Ti-(45-x)Ni-5Cu-xCr alloys. The B2-B19 transformation was separated clearly from the B19-B19' transformation in Ti-44.0Ni-5Cu-1.0Cr and Ti-43.5Ni-5Cu-1.5Cr alloys. A temperature range where the B19 martensite exists was expanded with increasing Cr content because decreasing rate of Ms (85 K / % Cr) was larger than that of Ms' (17 K / % Cr). Ti-(45-x)Ni-5Cu-xCr alloys were deformed in plastic manner with a fracture strain of 68% ~ 43% depending on Cr content. Substitution of Cr for Ni improves the critical stress for slip deformation in a Ti-45Ni-5Cu alloy due to solid solution hardening.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.357-361
• /
• 2018

We demonstrated a crack-free ${\alpha}-Ga_2O_3$ on sapphire substrate by horizontal halide vapor phase epitaxy (HVPE). Oxygen-and gallium chloride-synthesized Ga metal and HCl were used as the precursors, and $N_2$ was used as the carrier gas. The HCl flow and growth temperature were controlled in the ranges of 10~30 sccm and $450{\sim}490^{\circ}C$, respectively. The surface of ${\alpha}-Ga_2O_3$ template grown at $470^{\circ}C$ was flat and the root-mean-square (RMS) roughness was ~2 nm. The full width at half maximum (FWHM) values for the symmetric-plane diffractions, were as small as 50 arcsec and those for the asymmetric-plane diffractions were as high as 1,800 arcsec. The crystal quality of ${\alpha}-Ga_2O_3$ on sapphire can be controlled by varying the HCl flow rate and growth temperature.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.203-213
• /
• 2014

In Korea, a cooperation charge on conservation of ecosystem is imposed to prevent indiscriminate development. The total amount of this charge is determined by multiplying the size of the destroyed area by a value per unit area and the area index within 5 billion won. Since 2001, the charge per unit area has been determined to be $250won/m^2$. In this study, we estimated the unit value of ecosystem services per year using benefit transfer method, with a focus on forest resources. According to our results, forest resources have a value of about $3,500won/m^2$ per year. When the non-use value is subtracted, that figure becomes approximately $1,300won/m^2$. If this value incorporates the unit value of the cooperation charge on conservation of ecosystem, it will increase. To comply with the original intent of the cooperation charge on conservation of ecosystem, the fund must be used to improve ecosystem services, including the restoration of a destroyed area or the purchase of new land.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.75-82
• /
• 2007

This study was performed to investigate impacts of truck lane restrictions on multilane highways on traffic flow variables such as average speed, the frequency of lane changes, and change in traffic volume and also to verify whether or not different lane restriction scenarios were proper. Two types of hypothetical highway networks and OD demands were developed for traffic simulation models in order to conduct the experimental study. Three types of scenarios were also developed according to the number of restricted lanes for trucks. The PARAMICS microscopic traffic simulation software package was used as the primary analytical tool. Statistical analysis was conducted with simulation outputs. Results showed that truck lane restrictions may lead to positive impacts on traffic flow on multilane highways. In addition, this study demonstrated that the number of restricted lanes can be very an important factor to lead successful implementation of truck lane restrictions.

• Journal of Chest Surgery
• /
• v.28 no.7
• /
• pp.658-665
• /
• 1995

Between March 1989 and December 1994, one-stage repair was performed for correction of the intracardiac malformations associated with aortic coarctation in 34 patients or interrupted aortic arch in 8 patients via median sternotomy. There were 26 male and 16 female patients, and their body weight ranged from 1.8 to 8kg[mean weight, 4.0$\pm$l.4kg . The age at the operation ranged from 7 days to 18 months [mean age, 3.1$\pm$3.8 months . The repair of aortic coarctation or interrupted aortic arch was performed using extended end-to-end anastomosis in most of the patients[86%, 36/42 , and six patients underwent ductal tissue excision and patch aortoplasty. Intracardiac defects were corrected concomitantly through the right atrium unless the anatomy dictated otherwise. Obstructive outlet septurn was resected whenever necessary. There were seven early deaths[16.8% , and three late deaths with a mean follow-up period of 25 months [range from 1 to 65 months . Three patients were reoperated upon residual subaortic stenosis,stenosis at the RPA origin, and subacute bacterial endocarditis respectively. None showed any significant residual or anastomotic stenosis postoperatively. One stage repair of the aortic coarctation and interrupted aortic arch associated with intracardiac defect leaves no native coarctation shelf tissue or residual hypoplasia in the repaired segment, has low incidence of recurrent or residual stenosis, minimizes reoperation and incisions, and manages arch hypoplasia easily.We conclude that surgical results of one-stage repair for the intracardiac malformation associated with aortic coarctation or interrupted aortic arch are resonable.