• 전기의세계
• /
• 제28권6호
• /
• pp.61-77
• /
• 1979

This paper is concerned with minimization process of the binary logic function. This paper describes an algorithm called the SIMPLE TABLE METHOD that well suited to minimization a switching function of any number of variables. For the Simple Table construction, a theorem based upon the numerical properties of the logic function is derived from the relationships governing minterms of the given function. Finally the minimal sum of products can be obtained in terms of the Direct Method or the Indirect Method from the table and table characteristics derived from the Simple Table. The properties and table characteristics used in this paper are described. All the minterms of a switching function are manipulated only by decimal numbers, not binary numbers. Some examples are used as a vehicle to guide the readers who are familiar with the Karnaugh map and Quine-McCluskey tabular method to this New method. These examples not only treat how to handle Don't Care miterms but also show the multiple output functions.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.65-70
• /
• 2002

An analysis method for calculating motion accuarcy of double sides hydrostatic table is proposed in this paper. In this method, profiles of each rails are assumed as periodic function, therefore it is represented as the sum of spacial frequencies. Bearing clearance at any position rail is depended on the variation of linear, angular motion error of table and the form errors of both sides of a rail. Finite element method is applied to calculate pressure distributions in bearing clearance. In order to simplify the analyzing process, double sides table model is converted into equivalent single side table model. Results calculated by the proposed modeling method agree well with the results directly caculated by double sides modeling method, and also agree well with experimental results. From the theoretical and experimental analysis, it is verified that the proposed analysis method is very effective to analyze the motion accuracy of double sides hydrostatic table.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.746-751
• /
• 2014

This paper presents a method to calculate a sag cumulative table and density table based on the area of vulnerability to voltage sags. The expected sag performance at sensitive load points can be easily assessed through the calculation of the sag cumulative table and density table. However, the calculation of the tables regarding large power systems is very difficult task. Therefore, an efficient method for calculating the tables is needed. In this paper, the improved method to determine the areas of vulnerability is addressed and the method to calculate the tables based on the area of vulnerability is also described. The proposed scheme can be efficiently used to assess the voltage sag performance at sensitive load points in large power systems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1391-1398
• /
• 2009

The vibrating table method is widely used to estimate the minimum void ratio $e_{min}$. The existing method recommended in ASTM and KS F, however, can not consider the particle crushing during the vibrating table test. In this study, the particle cursing phenomenon was investigated by comparing vibrating table test with pluviation method using artificial sand (K-7). Vibrating table test for the artificial sand was confirmed which can crush of particle during the test. This study demonstrates that vibrating table test is an ineffective method to produce the more reliable $e_{min}$ of artificial sand.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.534-539
• /
• 1997

A CHF table method has been assessed in this study for rod bundle CHF predictions. At the conceptual design stage for a new reactor, a general critical heat flux (CHF) prediction method with a wide applicable range and reasonable accuracy is essential to the thermal-hydraulic design and safety analysis. In many aspects, a CHF table method (i.e., the use of a round tube CHF table with appropriate bundle correction factors) can be a promising way to fulfill this need. So the assessment of the CHF table method has been performed with the bundle CHF data relevant to pressurized water reactors (PWRs). For comparison purposes, W-3R and EPRI-1 were also applied to the same data base. Data analysis has been conducted with the subchannel code COBRA-IV-I. The CHF table method shows the best predictions based on the direct substitution method. Improvements of the bundle correction factors, especially for the spacer grid and cold wall effects, are desirable for better predictions. Though the present assessment is somewhat limited in both fuel geometries and operating conditions, the CHF table method clearly shows potential to be a general CHF predictor.

• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1147-1159
• /
• 1996

본 논문에서는 문서인식 시스템에서 정확한 문서 인식의 기본이 되고 인식 결과에 중요한 영향을 미치는 전처리 알고리즘 중 테이블 입력의 효율적인 처리 방법을 연구 한다. 테이블 내의 문자를 인식하기 위해서는 테두리선과 문자 부분을 먼저 분리하는 작업이 필요하다. 왜냐하면, 테이블을 인식하기 위해서는 테두리선에 의해 블록화된 테두리선 안의 문자를 인식해야 하며 또한 테두리선을 효율적으로 벡터화하는 방법이 필요하다. 테이블을 벡터화하는 방법으로 8방향 체인 코드를 이용하여 테이블 선 성분을 추출하는 방법과 히스토그램을 이용하여 테이블의 수행, 수직 성분을 추출 하여 얻어진 교차점을 이용하여 대각선 성분을 찾아내는 방법 및 화소의 Run-length를 이용하여 수평선 성분과 수직선 성분을 추출하여 얻어진 교차점을 이용해 대각선성분 을 찾아내는 방법이 있다. 또한 규칙성을 이용한 테이블 추출 방법은 테이블을 구성하는 수직선 성분과 수평선 성분의 규칙성을 찾아내 이를 이용하여 테이블을 벡터화 시킨다. 본 논문에서는 문서 영상 내의 테이블을 효율적으로 벡터화하기 위한 방법으로 규칙성을 이용한 방법을 제안한다.

• 한국멀티미디어학회논문지
• /
• 제25권5호
• /
• pp.695-702
• /
• 2022

In this paper, we propose the method of a table structure recognition in various table types for document processing automation. A table with items surrounded by ruled lines are analyzed by detecting horizontal and vertical lines for recognizing the table structure. In case of a table with items separated by spaces, the table structure are recognized by analyzing the arrangement of row items. After recognizing the table structure, the areas of the table items are input into OCR engine and the character recognition result output to a text file in a structured format such as CSV or JSON. In simulation results, the average accuracy of table item recognition is about 94%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.15-17
• /
• 2006

This paper presents a new global intensity compensation method for extracting moving object in a visual surveillance system by compensating time variant intensity changes of background region. The method that compensates a little changes of intensity due to time variant illumination change and automatic gain control of camera is called global intensity compensation. The proposed method expresses global intensity change with a mapping table to describe complex form of intensity change while the previous method models this global intensity change with a simple function as a straight line. The proposed method builds the mapping table by calculating the cross histogram between two images and then by selecting an initial point for generating the mapping table by using Hough transform applied to the cross histogram image. Then starting from the initial point, the mapping table is generated according to the proposed algorithm based on the assumption that reflects the characteristic of global intensity change. Experimental results show that the proposed method makes the compensation error much smaller than the previous GIC method

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.84-92
• /
• 1997

The purpose of this study is to develop a geometric error model and path compensation algorithm for rotating axes of the 5-axis machine tools, by a method to calibrate a rotary table using one master ball and three LVDTs. It was developed a new methodology to measure 3 translation errors of the rotary table and with a compensation procedure for setup errors of the master ball. The method is experimentally verified using a ball-table and on-machine inspection method. The results showed that the geometric error models with the path compensation strategy can be practically used as a means for improving the accuracy of the machine tools with rotary table.

• 한국정보과학회논문지:정보통신
• /
• 제36권2호
• /
• pp.80-89
• /
• 2009

분산 해쉬 테이블(DHT : Distributed Hash Table) 기반의 P2P는 기존 Unstructured P2P 방식의 단점을 보완하기 위한 방식이다. DHT 알고리즘을 사용하면 빠른 데이터 검색을 할 수 있고, 피어 개수에 무관하게 검색 효율을 유지할 수 있다. DHT 방식의 피어들은 카우팅 테이블을 최신으로 유지하기 위해 주기적으로 메시지를 보낸다. 모바일 환경의 경우, DHT 방식의 피어들은 라우팅 테이블을 최신으로 유지하고 요청 실패를 줄이기 위해서 빠른 주기로 메시지를 보내야 한다. 하지만 이로 인해, 전체 네트워크의 트래픽은 증가하게 된다. 본 논문에서는 리액티브 라우팅 테이블 업데이트 방식을 이용하여 기존 DHT에서의 라우팅 테이블 업데이트에 따른 부하를 줄이는 기법을 제안한다. 주기적으로 자신의 라우팅 테이블을 업 데이트하는 기존 방식(Proactive)과 달리, 제안된 방식에서는 데이터 요청이 들어 왔을 때만 라우팅 테이블을 업데이트하는 방식(Reactive)을 사용한다. 제안된 방식은 버클리 대학에서 만들어진 Chord 시뮬레이터(I3)를 이용하여 실험을 수행하였다. 실험을 통하여 제안된 방식이 기존 방식에 비해 성능이 향상되었음을 확인하였다.