• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.912-918
• /
• 2014

In this paper, a VHF band multi channel phase discriminator for direction finding equipment using tripple baseline interferometer technique is proposed. In order to measure simultaneously phase difference between IF(Intermediate Frequency) signals of the direction finding equipment, phase discriminator was designed to have parallel structure with multi channel, the phase correlator of phase discriminator was designed with I, Q mixer for reducing number of components. And digital LUT(Look Up Table) was applied for compensating error of phase discriminator due to phase unbalance of RF components. The measured phase accuracy of fabricated phase discriminator was 2 degree RMS(Root Mean Square) at 30 dB SNR condition, which is superior to the phase accuracy of conventional product.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.669-681
• /
• 2012

In this paper, analytical calculations using a novel mutual inductance formula for a resonant wireless power transmission system using helical coils. The look-up table of critical variables during the mutual inductance calculation process was formulated. The calculation results for resonant frequency and insertion loss were compared with experimental results when the distance between the two helical coils in a structure where the transmission and reception is symmetrical was varied with 10 mm increments from 53 mm to 500 mm. On average, the resonant frequency showed a difference of 5.63 % between the experimental results and the calculation results. The insertion loss had an average difference 2.25 dB where the smallest difference of 0.33 dB occurred with 290 mm. It was found that the experimental results without using a balun were in greater agreement with the calculation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1109-1115
• /
• 2010

FMCW(Frequency Modulation Continuous Wave) Radar can detect the distance and the velocity of forward obstacles using linearly modulated FM signal. For better performance, the RF of radar should be operated with wideband frequency linearity on 300 MHz bandwidth at 77 GHz carrier frequency. In this paper, we propose a simple method for improving frequency linearity of FMCW radar implemented with VCO. The proposed method shows that the Voltage-Frequency relation of VCO could be measured by using the modified Tx waveform of FMCW radar. Then the measured nonlinearity could be compensated using LUT(Look-up Table) with easy. It is noted that the proposed can be adopted in existing system without extra circuit.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.665-674
• /
• 2001

In this paper, a reduced complexity fillet to simultaneously suppress the blocking and ringing artifacts of compressed video sequence is addressed. A new one dimensional regularized function to incorporate the smoothness to its neighboring pixels into the solution is defined, resulting in very low complexity filter The proposed regularization function consists of two sub-functions that combine local data fidelity and local smoothing constraints. The regularization parameters to control the trade-off between the local fidelity to the data and the smoothness are determined by available overhead information in decoder, such as maroc-block type and quantization step size. In addition, the regularization parameters are designed to have the limited range and stored as look-up-table, and therefore, the computational cost to determine the parameters can be reduced. The experimental results show the capability and efficiency of the proposed algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.361-368
• /
• 2010

This paper presents high speed position controller using stepping motor. The proposed position controller has close loop and open loop mode. In the high speed region, torque angle which is controlled by PI controller and memory based look-up table, is used to keep the reference position. The memory based look-up table produces a torque angle according to motor speed, and the PI controller can compensate the torque angle error. So, the fast dynamic response can be expected in the same position error. The open loop control mode which is divided by 3-modes control the actual position in the low speed and small position error. Each open loop modes are designed to reduce position error and dynamic brake in the stop command. The proposed position control scheme is verified by the practical stepping motor.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.1-10
• /
• 2004

This paper proposes the method that design CLUT(color look-up table) simultaneously processing gamut mapping and color space conversion using only CLUT without complex computation. After CLUT is constructed using scanner gamut and printer gamut, the scanner gamut is extended to include original scanner gamut. This extended scanner gamut is used as input CIE $L^{*}$ $a^{*}$ $b^{*}$ values for CLUT. Then CMY values are computed by using gamut mapping. Input RGB image of scanner is converted into CIE $L^{*}$ $a^{*}$ $b^{*}$ by using regression function. CIE $L^{*}$ $a^{*}$ $b^{*}$ values of scanner are converted into CMY values without computation of additional gamut mapping using the proposed CLUT. In the experiments, the proposed method resulted in the similar color difference, but reduced the complexity computation than the direct computing method to process gamut mapping and color space conversion respectively.espectively.ively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.30-38
• /
• 2012

This paper presents packet detection, frequency offset estimation architecture and performance analysis for OFDM-based wireless personal area network (WPAN) systems. Packet detection structure is used to find the start point of a packet exactly in WPAN system as the correlation value passes the constant threshold value. The applied autocorrelation structure of the algorithm can be implemented simply compared to conventional packet detection algorithms. The proposed frequency offset estimation architecture is designed for phase rotation process structure, internal bit reduction to reduce hardware size and the frequency offset adjustment block to reduce look-up table size unlike the conventional structure. If the received signal can be compensated by estimated frequency offset through the correction block, it can reduce the impact on the frequency offset. Through the performance result, the proposed structure has lower hardware complexity and gate count compared to the conventional structure. Thus, the proposed structure for OFDM-based WPAN systems can be applied to the initial synchronization process and high-speed low-power WPAN chips.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1443-1454
• /
• 2016

Balanced encoding method that implement Dual-rail logic style based on hardware technique to software is efficient countermeasure against side-channel analysis without additional memory. Since balanced encoding keep Hamming weight and/or Hamming distance of intermediate values constantly, using this method can be effective as countermeasure against side channel analysis due to elimination of intermediate values having HW and/or HD relating to secret key. However, former studies were presented for Constant XOR operation, which can only be applied to crypto algorithm that can be constructed XOR operation, such as PRINCE. Therefore, our first proposal of new Constant ADD, Shift operations can be applied to various symmetric crypto algorithms based on ARX. Moreover, we did not used look-up table to obtain efficiency in memory usage. Also, we confirmed security of proposed Constant operations with Mutual Information Analysis.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.777-786
• /
• 1995

This paper describes several algorithms for technology mapping of logic functions into interesting and popular FPGAs that use look-up table memories. In order to improve the technology mapping for FPGA, some existing multi-level logic synthesis, decomposition reduction and packing techniques are analyzed and compared. And then new algorithms such as node-pair decomposition, merging fanin, unified reduction and multiple output decomposition which are used for combinational logic design, are proposed. The cost function is used to minimize the number of CLBs and edges of the network. The cost is a linear combination of each weight that is given by user. Finally we compare our new algorithm with previous logic design technique［8］. In an experimental comparison our algorithm requires 10% fewer CLB and nets than SIS-pga.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.113-124
• /
• 2010

This study is evaluating that new hi-tech transit systems each type of function and introduce applicable guideline decreases land sale price in New town and Large scale land development projects. For this, use the look-up table through the composite category of each type of system at the functional types, local characteristics. It also, As introduce the new systems calculate the Social benefits such as altered public traffic transfer system, reduced transit time and reduced carbon emission considering the three-dimensional arterial roads. As a result, New transportation systems contribute that the more reducing traffic congestion and air pollution and municipalities seeks for environment-friendly policy. However, this paper emphasize that the new transportation system has been introduce without considering the characteristics of locality and the efficient arrangement of them, it cannot be transferred the to the existing public traffic efficiently, futhermore causes the sale price in new large scale land development projects.