• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.29-34
• /
• 1992

Phase transition, dielectric properties, and leakage current characteristics of Ta2O5 thin film fabricated by sol-gel process with tantalum penta-n-butoxide were studied as a function of annealing temperature in O2 atmoshpere. Although Ta2O5 thin film annealed at temperatures below 700$^{\circ}C$ for 1 hr was amorphous, it was crystallized to ${\beta}$-Ta2O5 of orthorhombic phase by annealing at temperatures higher than 750$^{\circ}C$. With increasing annealing temperature from 500$^{\circ}C$ to 900$^{\circ}C$, dielectric constant of sol-gel processed Ta2O5 thin film was changed from 17.6 to 15.3 due to the increase of SiO2 thickness at Ta2O5/Si interface. For Ta2O5 thin film annealed at 500$^{\circ}C$ to 800$^{\circ}C$ for 1 hr in O2 atmosphere, leakage current was remarkably reduced and breakdown strength was increased with higher annealing temperature. For Ta2O5 film annealed at 800$^{\circ}C$, breakdown did not occur even at electric field strength of 30${\times}$105V/cm and leakage current was maintained lower than 10-8A/$\textrm{cm}^2$.

• 한국재료학회지
• /
• 제4권7호
• /
• pp.759-766
• /
• 1994

본 연구에서는 Ta 박막 밑에 $SnO_{2}$박막층을 입혀서 $Ta/SnO_2$이중박막이 산화될 때 산소의 공급원을 2원화 함으로써 $Ta_2O_5$의 stoichiomitry를 향상시켜 $Ta_2O_5$박막 커패시터의 주설전류를 줄이고자 하였다. Tantalum을 실리콘 웨이퍼 위에 기판온도를 변화시켜 가면서 전자빔증착이나 스퍼터링 방밥으로 입히고 $500^{\circ}C$~$900^{\circ}C$에서 산화시켜 Al/$Ta_2O_5$p-Si/Al또는Al/$Ta_2O_5$/p-Si/Al과 같은 MIS형 커패시터를 만들어 유전상수 및 누설전류를 측정하였으며 XRD, AES, ESCA등을 이용하여 박막의 결정성 및 특성을 분석하였다. $SnO_{2}$박막층을 입힌 커패시터는$SnO_{2}$층을 입히지 않은 커패시터보다 10배 이상 큰 200정도의 유전상수 값을 나타내었다. 그리고 산화온도가 높으면 박막의 결정화로 인하여 유전상수는 증가하지아는 누설전류도 약간 증가하는 것이 확인되었다. 또한 높은 증착온도는 일반적으로 누설전류를 낮추는 것으로 나타났다. 특히 $SnO_{2}$층을 입힌 경우에 기판온도를 $200^{\circ}C$로 하고 $800^{\circ}C$에서 산화시켜 만든 커패스터의 경우에 $4 \times 10^{5}$V/cm의 전장강도에서 $10^{-7}A/\textrm{cm}^2$의 낮은 누설전류 값을 나타내었다. $Ta_2O_5$박막은 $700^{\circ}C$ 이상에서 박막이 결정되고, Ta /$SnO_{2}$ 이중박막을 산화시키면 처음에는 Ta박막과 $SnO_{2}$박막 계면에서 $SnO_{2}$로부터 Ta박막에 산소가 공급되지마는 점차 Sn이 Ta박막쪽으로 확산되어 결국에는 Ta-Sn-O계의 새로운 ternary oxide가 생성되는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1330-1336
• /
• 1994

Ta2O5 films were deposited on the p-Si(100) substrates by ECR-PECVD and annealed in O2 atmosphere. The thicknesses of Ta2O5/SiO2 layers were measured by an ellipsometer and a cross-sectional TEM. Annealing in O2 atmosphere enhanced the stoichiometry of the Ta2O5 film and reduced the impurity carbon content. Ta2O5 films were crystallized at the annealing temperatures above 75$0^{\circ}C$. The best leakage current characteristics and the maximum dielectric constant of Ta2O5/SiO2 film capacitor were observed in the specimen annealed at $700^{\circ}C$ and 75$0^{\circ}C$, respectively. The flat band voltage of the Al/Ta2O5/SiO2/p-Si MOS capacitor was varied in the range of -0.6~-1.6 V with the annealing temperature. The conduction mechanism in the Ta2O5 film, the variation of the effective oxide charge density with the annealing temperature, and the effective electric field distribution in the Ta2O5/SiO2 double layer were also discussed.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.35-43
• /
• 1995

To obtain high quality of $Ta_{2}O_{5}$ film, two dielectric layers of $Si_{3}N_{4}$ and $Ta_{2}O_{5}$ were subsequently formed on Si wafer. Silicon nitride films were thermally grown in 10 Torr ammonia ambient by R.F induced heating system. The thickness of thermally grown $Si_{3}N_{4}$ film was able to be controlled in the range of tens $\AA$ due to the self-limited growth property. $Ta_{2}O_{5}$ film of 200$\AA$ thickness was then deposited on the as-grown $Si_{3}N_{4}$ film about 25$\AA$ thickness by sputtering method and annealed at $900^{\circ}C$in $O_{2}$ ambient for 1hr. Stoichiometry film was prepared by the annealing in oxygen ambient. Despite the high temperature anneal process, silicon oxide layer was not grown at the interface of the layered films because of the oxidation barrier effect of Si$_{3}$N$_{4}$ film. The fabricated $Ta_{2}O_{5}$/$Si_{3}N_{4}$ film showed low leakage current less than several nA and high dielectric breakdown strength.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1016-1022
• /
• 2001

This study presents the microstructure-electrical property relationship of reactive-sputtered Ta$_2$O$_{5}$ MIM capacitor structure processed by annealing in a vacuum and $O_2$ ambience. A microstructural investigation showed the existence of amorphous phase in as-deposited condition and the formation of preferentially oriented-Ta$_2$O$_{5}$ in $700^{\circ}C$ annealing. On annealing under the $O_2$ atmosphere, the Ta$_2$O$_{5}$ film exhibited the trend of its composition\`s approaching to stoichiometry from off-stoichiometry, analyzed by EPMA, the leakage current decrease and the enhanced temperature-capacitance characteristic stability. In the case of low temperature vacuum-annealing treatment, the leakage current behavior was stable irrespective of applied electric field. In the high temperature-annealed film at a vacuum condition, the electrical properties was observed to deteriorate. The results state that in Ta$_2$O$_{5}$ film annealed at $O_2$ atmosphere, gives rise to improvement of electrical characteristics in the capacitor were improved by reducing oxygen-vacancy and dandling Ta-O bond.-O bond.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.807-811
• /
• 2003

We investigated the electrical characterisitics of T $a_2$ $O_{5}$ (tantalum pentoxide) film and Ti-O/T $a_2$ $O_{5}$ film deposited on $Al_2$ $O_3$based substrate. Ta (tantalum) electrode and $Al_2$ $O_3$ substrate was used for the purpose of simplifying the manufacturing process in IPD's (integrated passive devices). Dielectric materials (T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ films) deposited on Ta/Ti/A $l_2$ $O_3$ were annealed at 700 $^{\circ}C$ for 60 sec. in vacuum. The XRD results showed that as-deposited T $a_2$ $O_{5}$ film possessed amorphous structure, which was transformed to crystallines by rapid thermal heat treatment. We compared the lnJ- $E^{{\frac}{1}{2}}$, C-V, C-F of both as-deposited and annealed dielectric thin films deposited on Ta bottom electrode. From this results, we concluded that the leakage current could be reduced by introducing Ti-O buffer layer and conduction mechanisms of T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ could be interpreted appropriately by Schottky emission effect.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.77-84
• /
• 1997

DC Magnetron Sputtering 방법으로 원기둥형 Alumina기판(직경 4mm, 길이 11mm) 상에 부(-)의 TCR특성의 TaN0.1(부도체)와 정(+)의 TCR특성의 Cr(금속)박막두께를 적절히 조절하므로써 초정밀 저항기를 제조하였다. 그리고 면저항(Rs)을 1k$\Omega$/수준으로 높이고 보 호막을 형성키 위하여 상부에 $Ta_2O_5$막을 입형 $Ta_2O_5/TaN_{0.1}/Cr/Al_2O_3$(substrate)의 다층 박 막저항체를 제조하였다. 적절한 조건(기판온도, $N_2$(g), Ar(g)의 유속 등)으로 상기 다층박막 내 각 막의 두께를 약10,100과 500nm두께로 증착했을 때, $Rs\approx 1k\Omega/\Box$와 $TCR\approx 20$\pm 5ppm/^{\circ}C$ 의 초정밀 저항체가 제조되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.39-39
• /
• 1992

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.334-334
• /
• 2012

Transparent oxide semiconductors have recently attracted much attention as channel layer materials due to advantageous electrical and optical characteristics such as high mobility, high stability, and good transparency. In addition, transparent oxide semiconductor can be fabricated at low temperature with a low production cost and it permits highly uniform devices such as large area displays. A variety of thin film transistors (TFTs) have been studied including ZnO, InZnO, and InGaZnO as the channel layer. Recently, there are many studies for substitution of Ga in InGaZnO TFTs due to their problem, such as stability of devices. In this work, new quaternary compound materials, tantalum-indium-tin oxide (TaInSnO) thin films were fabricated by using co-sputtering and used for the active channel layer in thin film transistors (TFTs). We deposited TaInSnO films in a mixed gas (O2+Ar) atmosphere by co-sputtering from Ta and ITO targets, respectively. The electric characteristics of TaInSnO TFTs and thin films were investigated according to the RF power applied to the $Ta_2O_5$ target. The addition of Ta elements could suppress the formation of oxygen vacancies because of the stronger oxidation tendency of Ta relative to that of In or Sn. Therefore the free carrier density decreased with increasing RF power of $Ta_2O_5$ in TaInSnO thin film. The optimized characteristics of TaInSnO TFT showed an on/off current ratio of $1.4{\times}108$, a threshold voltage of 2.91 V, a field-effect mobility of 2.37 cm2/Vs, and a subthreshold swing of 0.48 V/dec.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.85-90
• /
• 1998

Reactive ion etching (RIE) of Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the could be used effectively to etch the Ta-Al alloy thin film. The etching rate of the thin film at a Ta content of 50 mol% was about 67$\AA$/min. No selectivity between the Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the etching rate of the SiO2 layer was 12 times faster than that of the Ta-Al alloy thin film. In addition, it was observed that photoresist of AZ5214 was more useful than Shiepley 1400-2 in RIE with the CF4 gas.