• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.185-189
• /
• 2005

This paper focuses on the design for Rx/Tx switch module of GSM(global standard mobile) band, characterization of a miniature, low power and dual-band implementation of the front-end switch module with low-pass filer And the effort to make agreement between the simulated design and the measured data for these solutions takes the place through accumulated design and manufacturing data library. We present the design, modeling and measurement of switch module integrating GSM Rx/Tx switching circuit and LPF(low pass filter) on a LTCC(low temperature co-fired ceramic) substrate. For GSM application, insertion and return loss of the low pass filter designed was less than 0.3 dB which was less than 12.7 dB at 900 MHz. The LTCC switch module contained 10 embedded passives and 3 surface mount components integrated on 4.6$\times$4.8$\times$1.2 mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module measured at 900 MHz was 11 dB. In both of the design approach yielded excellent agreement between measured and simulated results.

• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.262-268
• /
• 2010

본 논문에서, 부성 저항 특성을 갖는 능동 커패시턴스 회로를 이용한 고출력 능동 가변 대역 통과 여파기는 동축형 유전체 공진기와 버랙터 다이오드를 사용하여 설계하였으며, 셀룰러 TX, RX 대역을 모두 가변할 수 있도록 설계하였다. 능동 커패시턴스 회로의 직렬 피드백 구조는 가변 대역 통과 여파기의 버랙터 다이오드로부터 생기는 손실을 보상함과 동시에 고출력 특성을 갖도록 하기 위해 $P_{1dB}$가 32 dBm인 GaAs HFET을 사용하였다. 버랙터 다이오드는 고선형 특성을 갖도록 하기 위해 back-to-back 구조를 사용하였다. 제작된 2단 능동 가변 대역 통과 여파기는 셀룰러 대역인 800 MHz에서 900 MHz를 가변하며, 각각 25 MHz 대역폭으로 TX 대역 836 MHz에서 0.48 dB 삽입 손실 특성을 나타냈으며, RX 대역 881.5 MHz에서 0.39 dB 삽입 손실 특성을 나타내었다. $P_{1dB}$특성은 TX 및 RX 대역에서 각각 19.5 dBm과 23 dBm을 얻었다.

• 한국통신학회논문지
• /
• 제25권4B호
• /
• pp.624-628
• /
• 2000

본 논문에서는 CDMA 단말기의 전기적 성능에 관한 최소의 요구 사항을 명기한 IS-98B의 항목에서 CDMA 파형의 질(Waveform Quality)을 규정하는 항목인 트래픽로(Traffic Rho)가 최소 성능에 만족하지 않을 경우 CDMA 단말기에 나타나는 현상을 분석하고, CDMA단말기 디자인시 단말기 송신부의 IF(Intermediate Frequency)단에서 TX IF SAW FILTER의 매칭회로를 개선하고 송신단 전원인 3.0V -TX를 발생시키는 LDO(Low Dropout Regulator)의 노이즈 발생을 차단하여 트래픽로 문제 해결방법을 제안한다. 제안 방법을 적용한 후의 파형과 적용전의 파형을 HP8924C 와 HP8595E을 이용하여 비교하여 성능을 개선됨을 보였다.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.52-57
• /
• 2014

본 논문에서는 위성 통신 단말용 X 대역 송신 필터와 수신 필터를 설계하고 제작 및 시험한 결과를 보인다. 송신 필터는 7.9 ~ 8.4 GHz, 수신 필터는 7.25 ~ 7.75 GHz의 대역을 가지며 두 필터 모두 상호 인접 주파수에서 매우 높은 차단 특성을 요구하는 필터이다. 이러한 필터를 인라인(in-line) 형태로 제작하기 위해 비공진 노드 기법을 사용하였으며 비공진 노드에는 E-평면 접합이 사용되었다. 회로 모델 설계 및 전자기 모델 설계 등의 단계적 설계 절차에 대해 기술하였다. 제작 및 튜닝 결과 두 필터 공히 온도 변화를 고려한 모든 요구조건을 만족하였으며 기존의 국내 상용품 대비 크기 및 무게를 30 ~ 40 % 줄일 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.245-248
• /
• 2001

In this paper, we have investigated the design technique and fabricated the surface acoustic wave (SAW) filter for duplexer, which consists of Tx. and Rx. filter, and antenna terminal. For Tx. and Rx. bandpass filters we used the one-port SAW resonators with n-section ladder structure. The structure is composed of couples of series-arm resonators and parallel-arm resonators. RF filter using ladder structure was designed and fabricated on 36$^{\circ}$Y-X LiTaO$_3$ substrates. Designed filters, insertion loss is less than 1.5dB, the bandwidth is more than 25MHz, rejection band level is less than -30dB and center frequency is 820MHz.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.933-941
• /
• 1996

In this study, the Tx(Transmitting) and Rx(Receiving) band pass filter for personal communication services was constructed and designed using .lambda./4 TEM mode dielectric resonators. Band pass filter was composed of ceramics resonators which has been developed using ($Zr_{0.65}$,$Sn_{0.35}$) $Ti_{1.04}$ $O_{4.04}$ ceramic and Unloaded-Q ( $Q_{o}$) of .lambda./4 TEM mode dielectric resonator with inner hole size 0.9mm and external size 3mm using silver electrode is 354.5 at 1.95GHz. For the band pass filter design and construction, the design theory and simulation results of band pass filter using J-inverter theory have been studied. The parameters which are evaluated by design theory are practically applied to the filter construction and the simulation results are in agreement with the measured results after fine tunnings.s.s.s.s.s.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.1048-1058
• /
• 1996

본 논문에서는 이중모드 공동 공진기로 구성된 송.수신 필터와 H-면 T-junction를 이용하여 Ku-band용 소형 듀플렉서를 설계.제작하였다. 듀플렉서는 송신 12.5GHz와 수신 14.5GHz에서 대역폭 100MHz를 갖도록 설계하였다. 설계.제작된 듀플렉서는 송신(TX) 및 수신(RX)필터를 이중모드 필터로 구성하여 공동 공진기 필터 구조를 갖는 기존의 듀플렉서에 비해서 크기를 약 40%이상 감소시키는 결과를 얻을 수 있었다. 듀플렉서의 동작특성은 H-면 T-junction부와 필터간의 정합시 각 필터의 특성이 왜곡되지 않도록 컴퓨터 시뮬레이션하였다. 이러한 결과 필터 자체의 특성과 듀플렉서 연결 후 특성은 거의 일치하는 결과를 얻을 수 있었다.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.38-46
• /
• 1996

The purpose of this study is to develop the miniaturized duplexer filter for mobile communications using high dielectric constant (${\varepsilon}$r > 100, 180) ceramic resonators. Duplexer filter was ocmposed of ceramic resonators which has been developed using BNT system and SCT system, respectively. Developed duplexer filter was formed to have Tx frequency band at 836.5 (($\pm$12.5)MHz and Rx frequency band at 881.5 ($\pm$12.5)MHz. Insertion loss at Tx frequency band was 1.41dB and 1.46dB, insertion loss at Rx frequency band was 3.49dB and 3.65dB, respectively. Especially, duplexer filters using dielectric cermaics with ${\varepsilon}$r = 180 were 8% smaller than commercially manufactured duplexer filters using dielectric ceramics with ${\varepsilon}$r = 90 by murata.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.107-113
• /
• 2018

Background: The purpose of our study was to compare the dosimetric advantages of Flattening filter free (FFF) beams for trigeminal neuralgia patients using 4 mm conical collimators over previously treated patients with 6 MV SRS beam. Materials and Methods: A retrospective study was conducted for 5 TN patients who had been previously treated at our institution using frame-based, LINAC-based stereotactic radiosurgery (SRS) on Novalis Tx using 6 MV SRS beam were replanned on 6X FFF beams on Edge Linear accelerator with same beam angles and dose constraints using 4 mm conical collimator. The total number of monitor units along with the beam on time was compared for both Edge and Novalis Tx by redelivering the plans in QA mode of LINAC to compare the delivery efficiency. Plan quality was evaluated by homogeneity index (HI) and Paddick gradient index (GI) for each plan. We also analyzed the doses to brainstem and organ at risks (OARs). Results and Discussion: A 28% beam-on time reduction was achieved using 6X FFF when compared with 6X SRS beam of Novalis Tx. A sharp dose fall off with gradient index value of $3.4{\pm}0.27$ for 4 mm Varian conical collimator while $4.17{\pm}0.20$ with BrainLab cone. Among the 5 patients treated with a 4 mm cone, average maximum brainstem dose was 10.24 Gy for Edge using 6X FFF and 14.28 Gy for Novalis Tx using 6X SRS beam. Conclusion: The use of FFF beams improves delivery efficiency and conical collimator reduces dose to OAR's for TN radiosurgery. Further investigation is warranted with larger sample patient data.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.103-109
• /
• 2006

This paper suggests an efficient and comprehensive algorithm of the protection ratio derivation and illustrates some calculated results applicable to the initial planning of frequency coordination in the fixed wireless access networks. The net filter discrimination associated with Tx spectrum mask and overall Rx filter characteristic has been also examined to show the effect of the adjacent channel interference. The calculations for co-channel and adjacent channel protection ratios are performed for the current microwave frequency band of 6.7 GHz including Tx spectrum mask and Rx filter response. According to results, fade margin and co-channel protection ratio reveal 41.4 and 75.2 dB, respectively, for 64-QAM and 60 km at BER $10^{-6}$. It is shown that the net filter discrimination with 40 MHz channel bandwidth provides 28.9 dB at the first adjacent channel, which yields 46.3 dB of adjacent channel protection ratio. In addition, the protection ratio of 38 GHz radio relay system is also reviewed for millimeter wave band applications. The proposed method gives some advantages of an easy and systematic extension for protection ratio calculation and is also applied to frequency coordination in fixed millimeter wave networks.