• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.185-189
• /
• 2005

This paper focuses on the design for Rx/Tx switch module of GSM(global standard mobile) band, characterization of a miniature, low power and dual-band implementation of the front-end switch module with low-pass filer And the effort to make agreement between the simulated design and the measured data for these solutions takes the place through accumulated design and manufacturing data library. We present the design, modeling and measurement of switch module integrating GSM Rx/Tx switching circuit and LPF(low pass filter) on a LTCC(low temperature co-fired ceramic) substrate. For GSM application, insertion and return loss of the low pass filter designed was less than 0.3 dB which was less than 12.7 dB at 900 MHz. The LTCC switch module contained 10 embedded passives and 3 surface mount components integrated on 4.6$\times$4.8$\times$1.2 mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module measured at 900 MHz was 11 dB. In both of the design approach yielded excellent agreement between measured and simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.262-268
• /
• 2010

In this paper, a high power active tunable bandpass filter made of dielectric resonators and varactor diodes is designed using the active capacitance circuit generating negative resistance for tuning cellular TX, RX band. An active capacitance circuit's series feedback circuit using GaAs HFET whose $P_{1dB}$ is 32 dBm is used for compensating the losses from the varactor diodes of the tunable bandpass filter. The tuning elements, the varactor diodes are used as the back-to-back configuration to achieve the high power performance, The designed active capacitance circuit improves the insertion loss characteristics. The designed 2-stage active tunable dielectric bandpass filter at cellular band can cover from 800 MHz to 900 MHz. The insertion losses at 836 MHz and 881.5 MHz with 25 MHz bandwidth are 0.48 dB and 0.39 dB, respectively. The $P_{1dB}$ of the designed bandpass filter at TX and RX band are measured as 19.5 dBm and 23 dBm, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.624-628
• /
• 2000

In this paper, the phenomenon to show in CDMA handset in case of which CDMA handset do not meet Traffic Rho value of IS-98B specifications, which have minimum requirements of CDMA handset about electrical performance is analyzed. This paper proposed method to improve Traffic Rho through improving the matching circuit of TX IF SAW FILTER and deleting noise of LDO(Low Dropout Regulator) to generate 3.OV_TX in TX block. HP8924C(CDMA Mobile Station Tester Set) and HP8595E(Spectrum Analyzer) measures the improved CDMA waveform.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.52-57
• /
• 2014

In this paper, designs and test results of X-band Tx and Rx filters for satellite communications are presented. The passbands are 7.9 ~ 8.4 GHz and 7.25 ~ 7.75 GHz for the Tx filter and the Rx filter respectively. Both of the filters require very high rejection performance between the two passbands. In order to make these filters in an in-line type, non-resonating node method was adopted and E-plane junction was used for the non-resonating node. Design procedures of circuit model design and full-wave electromagnetic model design are described. The test results show that all the performances meet requirements including temperature variations and the sizes are smaller than those of domestic commercial filters by about 30 ~ 40 %.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.245-248
• /
• 2001

In this paper, we have investigated the design technique and fabricated the surface acoustic wave (SAW) filter for duplexer, which consists of Tx. and Rx. filter, and antenna terminal. For Tx. and Rx. bandpass filters we used the one-port SAW resonators with n-section ladder structure. The structure is composed of couples of series-arm resonators and parallel-arm resonators. RF filter using ladder structure was designed and fabricated on 36$^{\circ}$Y-X LiTaO$_3$ substrates. Designed filters, insertion loss is less than 1.5dB, the bandwidth is more than 25MHz, rejection band level is less than -30dB and center frequency is 820MHz.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.933-941
• /
• 1996

In this study, the Tx(Transmitting) and Rx(Receiving) band pass filter for personal communication services was constructed and designed using .lambda./4 TEM mode dielectric resonators. Band pass filter was composed of ceramics resonators which has been developed using ($Zr_{0.65}$,$Sn_{0.35}$) $Ti_{1.04}$ $O_{4.04}$ ceramic and Unloaded-Q ( $Q_{o}$) of .lambda./4 TEM mode dielectric resonator with inner hole size 0.9mm and external size 3mm using silver electrode is 354.5 at 1.95GHz. For the band pass filter design and construction, the design theory and simulation results of band pass filter using J-inverter theory have been studied. The parameters which are evaluated by design theory are practically applied to the filter construction and the simulation results are in agreement with the measured results after fine tunnings.s.s.s.s.s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.1048-1058
• /
• 1996

In this paper, a small duplexer is designed and implemented using a H-plane T-junction and Transmitting/Geceiving filte with a dual mode cavity resonator for Ku-band. Transmitting(TX) filter is designed at center frequeny 12.5 GHz and Receiving(RX) filter, at center frequency 14.5 GHz. Both filters have a 100 MHz bandwidth. This duplexer is reduced to about 40% by the conventional duplexer of cavity bandpass filter structure in size. Operating characteristics of duplexer is optimized in order not to distors matching characteristics of each filter when interfaced to a H-plane T-junction. Consequently, the responses of filter with H-plane T-junction nearly coincide with that of filter itself.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.38-46
• /
• 1996

The purpose of this study is to develop the miniaturized duplexer filter for mobile communications using high dielectric constant (${\varepsilon}$r > 100, 180) ceramic resonators. Duplexer filter was ocmposed of ceramic resonators which has been developed using BNT system and SCT system, respectively. Developed duplexer filter was formed to have Tx frequency band at 836.5 (($\pm$12.5)MHz and Rx frequency band at 881.5 ($\pm$12.5)MHz. Insertion loss at Tx frequency band was 1.41dB and 1.46dB, insertion loss at Rx frequency band was 3.49dB and 3.65dB, respectively. Especially, duplexer filters using dielectric cermaics with ${\varepsilon}$r = 180 were 8% smaller than commercially manufactured duplexer filters using dielectric ceramics with ${\varepsilon}$r = 90 by murata.

• Journal of Radiation Protection and Research
• /
• v.43 no.3
• /
• pp.107-113
• /
• 2018

Background: The purpose of our study was to compare the dosimetric advantages of Flattening filter free (FFF) beams for trigeminal neuralgia patients using 4 mm conical collimators over previously treated patients with 6 MV SRS beam. Materials and Methods: A retrospective study was conducted for 5 TN patients who had been previously treated at our institution using frame-based, LINAC-based stereotactic radiosurgery (SRS) on Novalis Tx using 6 MV SRS beam were replanned on 6X FFF beams on Edge Linear accelerator with same beam angles and dose constraints using 4 mm conical collimator. The total number of monitor units along with the beam on time was compared for both Edge and Novalis Tx by redelivering the plans in QA mode of LINAC to compare the delivery efficiency. Plan quality was evaluated by homogeneity index (HI) and Paddick gradient index (GI) for each plan. We also analyzed the doses to brainstem and organ at risks (OARs). Results and Discussion: A 28% beam-on time reduction was achieved using 6X FFF when compared with 6X SRS beam of Novalis Tx. A sharp dose fall off with gradient index value of $3.4{\pm}0.27$ for 4 mm Varian conical collimator while $4.17{\pm}0.20$ with BrainLab cone. Among the 5 patients treated with a 4 mm cone, average maximum brainstem dose was 10.24 Gy for Edge using 6X FFF and 14.28 Gy for Novalis Tx using 6X SRS beam. Conclusion: The use of FFF beams improves delivery efficiency and conical collimator reduces dose to OAR's for TN radiosurgery. Further investigation is warranted with larger sample patient data.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.103-109
• /
• 2006

This paper suggests an efficient and comprehensive algorithm of the protection ratio derivation and illustrates some calculated results applicable to the initial planning of frequency coordination in the fixed wireless access networks. The net filter discrimination associated with Tx spectrum mask and overall Rx filter characteristic has been also examined to show the effect of the adjacent channel interference. The calculations for co-channel and adjacent channel protection ratios are performed for the current microwave frequency band of 6.7 GHz including Tx spectrum mask and Rx filter response. According to results, fade margin and co-channel protection ratio reveal 41.4 and 75.2 dB, respectively, for 64-QAM and 60 km at BER $10^{-6}$. It is shown that the net filter discrimination with 40 MHz channel bandwidth provides 28.9 dB at the first adjacent channel, which yields 46.3 dB of adjacent channel protection ratio. In addition, the protection ratio of 38 GHz radio relay system is also reviewed for millimeter wave band applications. The proposed method gives some advantages of an easy and systematic extension for protection ratio calculation and is also applied to frequency coordination in fixed millimeter wave networks.