• The Journal of Korean Society for Radiation Therapy
• /
• 제30권1_2호
• /
• pp.139-151
• /
• 2018

Objectives : A self-made "Tomotherapy couch device" capable of correcting the Yaw direction was fabricated and evaluated for its usefulness. Materials and Methods : "Tomotherapy couch device" capable of correcting the Yaw direction is made of rigid fibreboard with a flexural strength of $200kg/cm^2$. CBCT Image from Novalis Tx and Iso-Align Phantom from MED-TEC were used to evaluate the physical accuracy. The treatment plan was designed using Accuray $Precision^{TM}$ and In House Head and Phantom. Accuray $PrecisionART^{TM}$ and $Precision^{TM}$ was used to evaluate dose. Results : Evaluation results, the self-fabricated device accurately corrected the setup error, Target dose was within 95 %~107 % of all. In order to directly evaluate the OAR dose according to the Yaw change, the absolute dose was measured. As a result, when the error in the Yaw direction was $3^{\circ}$, the specific OAR showed a maximum difference of 18.4 %. Conclusion : "Tomotherapy couch device" capable of correcting the Yaw direction can be manufactured at a lower cost compared to the effect, and it can prevent the patient's MVCT image dose for re-imaging. Accurate radiation therapy without errors can be performed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.335-335
• /
• 2022

남한상세 기후변화 전망보고서(2021)는 2100년대 강원도 강수량이 현재보다 19% 증가하고, 평균기온이 현재보다 6.5℃ 상승할 것으로 공표했다. 강원도는 영동지역과 영서지역으로 분리돼 기후 차이가 분명하다. 기상청 ASOS 데이터(1986~2020)를 이용해 기후 특성을 확인한 결과 영동지역 강수량은 1,463mm, 평균기온은 10.5℃, 상대습도는 66%로 분석됐고, 영서지역 강수량은 1,307mm, 평균기온은 11℃, 상대습도는 68%로 분석됐다. 영동지역 강수량이 영서지역 강수량보다 약 156mm 더 많으며, 이는 영동지역에서 큰 규모의 우심 피해가 발생할 가능성이 존재함을 의미한다. 강원도 평년 우심 피해 현황을 살펴본 결과 영동지역은 5회(피해액: 62억 원), 영서지역은 24회(피해액: 62억원)가 발생했다. 이는 미래로 갈수록 더 심해질 것으로 판단되며, 이런 기상 재난을 객관적으로 판단할 수 있는 기준이 필요하다. 이에 본 연구에서는 기후변화에 따른 강원도 기후 재난취약성을 평가했다. 이를 위해 기후변화 위험성, 기후변화 민감도, 기후변화 적응능력 지표를 활용해 기후변화 취약성 지표를 선정했다. 기후변화 위험성 지표는 홍수(CWD, Rx5day, R30mm), 가뭄(CDD, SU, TX90p), 폭염(SU, TR, TN90p), 한파(ID, TX10p, FD)로 RCP 8.5 기후변화시나리오를 ETCCDI 지수에 적용했다. 기후변화 민감도와 기후변화 적응능력 지표는 국가통계포털, 강원통계정보, WAMIS에서 자료를 수집해 선정했다. 또한 재난취약성 지표를 4단계(Very Low, Low, High, Very High)로 구분했다. 홍수 취약성 평가 결과 2090년대 원주시, 춘천시, 횡성군이 Low에서 Very High로 단계가 격상됐다. 가뭄 취약성 평가 결과 2090년대 양양군, 영월군, 정선군이 Very Low에서 Very High로 단계가 격상됐다. 폭염 취약성 평가 결과 2090년대 삼척시, 태백시, 영월군이 Very Low에서 Very High로 단계가 격상됐다. 한파 취약성 평가 결과 삼척시, 태백시, 영월군이 High에서 Very Low로 단계가 격하됐다. 고로 강원도는 기후 재난취약성 평가 결과에 따른 미래 기후변화를 대비하고, 각 지역 특성에 맞는 복원력 관점 기후 재난 관리가 필요하다고 사료된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38B권2호
• /
• pp.146-153
• /
• 2013

The IR-UWB radar system radiates a pulse whose width is several hundred pico sec at Tx antenna and check the time to receive the pulse that reflected from target to measure the TOA. In this paper, we present a new algorithm which supplement the conventional ranging algorithm for more accurate estimation. We get received signal data using IR-UWB Radar module which equipped a NVA6000 UWB Transceiver and analysis the data of multi-path. Consequently, we found the property of UWB multi-path signal, which best fit a Gamma distribution. so we present a algorithm using Gamma-distribution and compared a performance with conventional ranging algorithm.

• Journal of Digital Convergence
• /
• 제10권10호
• /
• pp.313-318
• /
• 2012

In this study, we propose a low-noise transceiver for 10GHz motion sensor. The transceiver presented here has a circuit(Hittite HMC908LC5) that is composed of a two way-$0^{\circ}$ power splitter(the 1:2 block) and a $90^{\circ}$ Hybrid. The noise reduction circuit utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. A modeling and analysis have been pursued using CST MWS. A prototype sensor was manufactured to measure the performance and experimental results show that the proposed sensor is good enough to use for a accurate motion sensor.

• Magazine of the Korea Concrete Institute
• /
• 제6권6호
• /
• pp.180-189
• /
• 1994

A practical methodology to detect and localm da~nagc in rcinforced concrete structures by utilizing modal response parameters of as built and tiamaged states is presented. First, a damage detection algorithm which yields information on the, location of damage directly from changes in mode shapes of structures is outlined. Next, the algorithm is implemented to detec and localize damage in a real, 1 1/3 scale, reinforced concrete structure. A set of pre-damage and post damage modal parameters are used for I he damage detection exercise. The results of the damage prediction show that the proposed algorithm can correctly locate the damage inflicted in the test structure.

• Magazine of the Korea Concrete Institute
• /
• 제6권6호
• /
• pp.143-150
• /
• 1994

Most widened bridges have been constructed by the joining-construction method that makes new and existmg bridges structurally a single structure. Since the joining-constructiori method has several problems in design and construction viewpoint, this study is conducted in order to investigate the flexural fatigue behavior of RC slabs, which are widened and influenced by traffic-induced vibration of existmg bridge during placing and curing of new concrete, with the prototype fatigue test. It was found that stress concentration at the jclmts anti slips between steel bar and concrete are occured. Hut, the general tx:havinrs are similar to the original state and joining-construction method using expansive concrete nut~gated the influence of the trafflc-induced vibration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제14권2호
• /
• pp.148-156
• /
• 2003

This paper describes the RF performance issues of UE for W-CDMA system based on 3 GPP specifications. The parameters of transmitter and receiver are derived from the viewpoint of RF performance. In order for UE to achieve high performance, the transceiver performance requirements such as ACLR, EVM, Peak Code Domain Error, spectrum emission mask, frequency error stability and TX power control dynamic range for transmitter and reference sensitivity level, blocking characteristics, noise figure, ACS, AGC dynamic range for receiver are considered. On the basis of the required parameters, the UE RF transceiver is implemented and then the evaluation of RF performance is accomplished through practical test scenarios.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.125-130
• /
• 2005

This paper suggests an efficient method of protection ratio calculation and shows some calculated results applicable to frequency coordination in microwave relay system networks, and the net filter discrimination (NFD) associated with Tx spectrum mask and overall Rx filter characteristics has been examined to obtain the adjacent channel protection ratio. The protection ratio comprises several factors such as C/N of modulation scheme, noise-to-interference ratio, multiple interference allowance, fade margins of multi-path and rain attenuation, and NFD. According to computed results for 6.7 GHz, 64-QAM, and 60 km at BER $10^{-6}$, fade margin and co-channel protection ratio are 41.1 and 75.2 dB, respectively, In addition, NFD for channel bandwidth of 40 MHz reveals 28.9 dB at the first adjacent channel, which results in adjacent channel protection ratio of 46.3 dB. The proposed method provides some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter wave relay system networks.

• Journal of Internet Computing and Services
• /
• 제3권5호
• /
• pp.9-17
• /
• 2002

CSIX-L1 is the Common Switch Interface that defines a physical interface for transferring information between a traffic manager (Network Processor) and a switching fabric in ATM, IP, MPLS, Ethernet and data communication areas. In Tx, data to be transmitted is generated in Cframe which is the base information unit and in Rx, original data is extracted from the received Cframe. CSIX-L1 suppots the 32, 64, 96, and 123-bit interface and generates a variable length CFrame and Idle Cframe. Also CSIX-L1 appends Padding byte and supports 16-bit Vertical parity, CSIX-L1 is designed using Xilinx 4,1i. After functional and timing simulations are completed. CSIX-L1 module is downloaded in Xilinx FPGA XCV1000EHQ240C and verified. The synthesized CSIX module operates at 27MHz.

• Asia pacific journal of information systems
• /
• 제7권1호
• /
• pp.99-111
• /
• 1997

This paper presents an application of an artificial neural net to the implementation of decision class analysis (DCA), together with the generation of a decision model influence diagram. The diagram is well-known as a good tool for knowledge representation of complex decision problems. Generating influence diagram model is known to in practice require much time and effort, and the resulting model can be generally applicable to only a specific decision problem. In order to reduce the burden of modeling decision problems, the concept of DCA is introduced. DCA treats a set of decision problems having some degree of similarityz as a single unit. We propose a method utilizing a feedforward neural net with supervised learning rule to develop DCA based on influence diagram, which method consists of two phases: Phase l is to search for relevant chance and value nodes of an individual influence diagram from given decision and specific situations and Phase II elicits arcs among the nodes in the diagram. We also examine the results of neural net simulation with an example of a class of decision problems.