• Journal of Korea Multimedia Society
• /
• v.13 no.10
• /
• pp.1525-1533
• /
• 2010

With the digital terrestrial television broadcasting transition, terrestrial television broadcasting have required the replacement of retransmission facilities for the analog broadcasting installed in the existing apartment, building, cable TV station, MATV system and so on. In addition, new standards have been enacted for retransmission of the digital television broadcasting in MATV system. To deal with this issue, in this paper, we propose a new 8-VSB remodulator that can retransmit signals of the terrestrial digital television broadcasting. Moreover, we present a standard and the process composition of the 8-VSB remodulator, and an experimental environment configuration for performance evaluation. To achieve this, we have implemented the 8-VSB remodulator with the sequential process components comprised of the RF signal retransmission, the TS stream modulator, the RF signal reception and demodulation. Through the simulation, we analyze the performance standard from the measured data such as spurious and phase noise. And then, we measure SNR and EVM of each attenuation step of the signal obtained by the signal processor and the 8-VSB remodulator with the same retransmission environment and conditions. Experimental results show that both the 8-VSB remodulator and the signal processor can be used as equipment for the retransmission of the terrestrial digital television broadcasting. In addition, the 8-VSB remodulator performed well to improve the transmission efficiency for the digital broadcasting signal, compare to the existing signal processor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.295-302
• /
• 2011

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks(SFN) in the Advanced Television Systems Committee(ATSC) transmission systems and propose Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) thar overcomes the limitation of EDOCR(Equalization Digital On Channel Repeater) proposed by ETRI. The proposed IC-DOCR maintains the benefits of EDOCR that have good output signal quality removing multi-path, additive white Gaussian noise(AWGN). In additional, since the Interference Cancellation algorithm using the 8-VSB symbol demodulation of received signal removes the Interference of feedback signal, IC-DOCR improve the weakness of EDOCR that have low isolation between receive and transmit antenna so that can overcome the limitation of output signal power. we did analysis and verification of the proposed system performance using computational simulation.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.156-156
• /
• 1999

This paper describes the characteristics and the criteria of electrical environmental effects produced from power system especially transmission line. Audible noise radio and TV interference, electric and magnetic inductions which are main items for optimal conductor selection as well as major contributors to the community complaint of electrical environmental problem, are surveyed and studied comparing with the criteria or the environmental protection regulation of domestic and foreign countries. As a result a domestic criteria of electrical environmental on power system was suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.271-274
• /
• 1996

TV나 스피커가 부착되는 PC Monitor에서는 스피커에서 나오는 음향에너지로 인한 진동으로 물결무늬모양의 화면떨림현상이 발생하는데 이를 감소시키기 위해 본 연구에서는 모니터에서의 스피커 부착부분에 대한 개선이 아닌 CRT 자체를 개선하여 어떤 형태의 모니터에 장착하여도 Microphonic현상이 최소화될 수 있는 CRT를 개발하고자 한다. 본 연구에서는 15" CRT를 대상으로 Microphonic현상의 원인규명과 개선안을 도출하였다. Microphonic현상의 주파수분석과 모드분석을 통해 원인을 규명하고 중요부품을 위주로 유한요소해석모델을 구현하였으며 이를 이용하여 중요인자 중 개선이 쉬운 스프링과 프레임에 대한 형상개선을 통해 Microphonic현상수준을 크게 개선하였다. 특히 17" 프레임에 대한 구체적인 개선형상은 실험계획법을 사용하여 도출하였다. 15" GoldStar CRT의 경우는 동일모델에서 최고수준으로 현재 생산 판매되고 있다. 현재 생산 판매되고 있다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.333-341
• /
• 2007

Waveform design method for inkjet printing has been proposed tv pressure wave measurement. The pressure wane inside the inkjet dispenser can be effectively measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially availablelaser vibrometer. In order to obtain high speed inkjet droplets, two pulse waveform was designed such that the pressure wane after droplet formation can be minimized.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.97-102
• /
• 2011

The size of TV and TFT-LCD are bigger and bigger for the next generation exposure equipment install that existing fab are getting a lot of additions. When the new fab build an extension that the shortening of the construction and non-vibration are use cast in place concrete pile method. In this study when lay the foundation of existing fab adjoin use vibration monitoring system are rotator type all casing method among cast in place concrete pile method. The evaluation of ground vibration of rotator type all casing method effect to precision equipment and vibration area of influence.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.139-146
• /
• 2017

The ISDB-T(Integrated Service Digital Broadcasting Terrestrial) can be used in the multipath and impulsive noise, also it provide good performance over mobile reception environment since it use the OFDM(Orthogonal Frequency Division Multiplexing) based transmission technology and time interleaving technology. One segment and full segment are divided according to the number of the assigned segment. And one-segment broadcasting receiver can design and implement without high levels of technology than the full-segment broadcasting receiver using 64QAM(64 Quadrature Amplitude Modulation) since it uses QPSK(Quadrature Phase Shift Keying) modulation/demodulation. However, it has a constraint in the display size and resolution due to data-rate limits. In this paper, we design and implementation of full-segment ISDB-T receiver module which support HD resolution for set-top box, digital TV, navigation. In experimental results, the implemented full-segment ISDB-T receiver module was satisfactory for all of the desired functions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2199-2205
• /
• 2013

In modern society the image processing has been applied to various digital devices such as smartphone, digital camera, and digital TV. In the field of image processing the edge detection is one of the important parts in the image processing procedure. The image edge means point that the pixel value is changed between background and object rapidly, and includes the important information such as magnitude, location, and orientation. The performance of the existing edge detection method is insufficient for the image degraded by AWGN(additive white Gaussian noise) because it detects edges by using small weighted masks. Therefore, in this paper, to detect edge in AWGN environment effectively, we proposed an algorithm that detects edge as calculated gradient of sorting vector which is transformed by estimated mask from new pixel according to each region.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.820-825
• /
• 2004

In this paper an octave tuning voltage controlled oscillator which is used in set-top TV tuner was designed. Oscillation frequency range is 0.9 GHz～2.2 GHz with 1.3 GHz bandwidth. By using 4 varactor diodes in base and emitter of transistor, wide-band tuning, sweep linearity and low phase noise could be achieved. Designed VCO requires a tuning voltage of 0 V ～ 20 V and DC consumption of 10 V and 15 mA. Designed VCO exhibits an output power of 5.3 dBm $\pm$1.1 dB and a phase noise below -94.8 dBc/Hz ＠ 10 kHz over the entire frequency range. The sweep linearity shows 65 MHz/V with a deviation of $\pm$10 MHz.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.636-650
• /
• 2008

DTV has a great advantage as compared to Analog TV in picture quality under low reception field strength. Various high quality tuners have been developed to result in much smaller Noise Figure of the receivers and many trials for receiving DTV signal through indoor antenna. In this paper, results of intensive field tests on the indoor reception of DTV are presented. Tests were carried out around Seoul-Gyeonggi Metropolitan area. Commercial directional and omni-directional antennas and 5th generation receiver were used for reception availability tests. The effects of heights, locations, and types of the house as well as the distance to the transmitter on the reception performances are analyzed. Our test results will be applied to improve the indoor reception environment of DTV.