• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.99-104
• /
• 1999

최근 산업이 대규모화함에 따라 고압 전력 변환 장치의 필요성이 증가하고 있고, 이에 따라 전력용 반도체 소자의 직렬 구동이 많이 이용되고 있다. 소자의 직렬 구동은 소자간에 적절한 전압 분배가 이루어져 개별 소자에 정격이상의 과전압이 인가되는 것을 방지하는 것이 큰 관건이다. 또한 고전압 회로에서는 부유 인덕턴스에 의한 소자의 과전압도 방지하여야 한다. 본 논문에서는 직렬 연결된 IGBT의 턴-오프 과도상태시 컬렉터 전압 기울기 조절로 안정된 전압 분배와 과전압을 방지하는 새로운 게이트 구동기법을 제안한다. 제안하는 게이트 구동기법은 컬렉터 전압을 검출하여 능동적으로 게이트 신호를 제어함으로써 과전압을 제한한다. 새로운 IGBT 게이트 구동회로를 제작하고 직렬 연결된 IGBT 회로에 적용하여 게이트 구동기법의 타당성을 검증하였다.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.125-131
• /
• 2012

PURPOSES : Road lighting facilities increase the visibility of road at night in order to improve traffic driver safety and comfort. Generally speaking, current pole lighting has a tendency to create problems of glare and flicker. The phenomenon of glare gives discomfort due to increase of scattered light, when high luminance is in driver's field of view. The phenomenon of flicker occurs due to the driver passing through discontinuous pockets of pole lighting areas. These phenomenon increase eye strain and decrease driver safety. METHODS : Low height line lighting that distributes light lower than driver's eye level has been developed and evaluated to reduce the problems linked to current pole lighting. A test was undertaken with 4 conditions(turn on the general pole lighting, turn off alternate pole lighting, turn on the line lighting and line lighting with 50% dimming). A driver written survey was conducted in order to gain driver feedback. RESULTS : Pupil size and brow frequency compared with degree in pole lighting are reduced. CONCLUSIONS : Low height line lighting environment makes drivers more comfortable than pole lighting environment and is positive lighting method in the energy saving and landscape aspect.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1566-1574
• /
• 2017

When the inter-turn short circuit (ITSC) fault occurs, the distortion of the magnetic field is serious. The motor loss variations of each part are obvious, and the motor temperature field is also affected. In order to obtain the influence of the ITSC fault on the motor temperature distribution, firstly, the normal and the fault finite element models of the permanent magnet synchronous motor (PMSM) were established. The magnetic density distribution and the eddy current density distribution were analyzed, and the mechanism of loss change was revealed. The effects of different forms and degrees of the fault on the loss were obtained. Based on the loss analysis, the motor temperature field calculation model was established, and the motor temperature change considering the loop current was analyzed. The influence of the fault on the motor temperature distribution was revealed. The sensitivity factors that limit the motor continuous operation were obtained. Finally, the correctness of the simulation was verified by experiments. The conclusions obtained are of great significance for the fault and high temperature demagnetization of the permanent magnet analysis.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.1-7
• /
• 2013

LED lamps are appropriate to the light source for use in broadcasting lighting. When the lighting frequency of LED lamp is different from the shutter frequency of camera, however, the flicker appears on the moving image which is taken by the camera under the dimmed light of LED lamp with conventional dimming methods. In this study, a new dimming method for the LED lamps used as the broadcasting lighting is proposed to minimize the flicker. A lighting period in the proposed dimming method is divided into the several sub-periods which have weight of the bits. Also, the proposed dimming method has characteristics that are optimizing the turn-on timings of two LED lamps to reduce the turn-off periods of the lamps and not to overlap the turn-on periods of the lamps. In the experiments, the incidence of the flicker is taken by the camera under several lighting conditions of the conventional dimming methods and the proposed dimming method. In addition, the brightness values of the frames are obtained in the moving image, and incidence of the flicker is evaluated and compared with conventional methods. From the results, the incidence of the flicker in the proposed method is more improved than the conventional methods.

• 시스템엔지니어링학술지
• /
• 제10권2호
• /
• pp.59-69
• /
• 2014

In the bidding stage of turn-key based plant construction contracts, owners provide design and performance basis for contractors instead of giving design drawing. To win the bid for a plant construction, the contractors should be obliged to satisfy and ensure owners'requirements such as design and performance basis in a plant construction project, In other words, owners imposes technical risk of the design to the contractors by specifying responsibility for the analysis and verification of the plant construction. Thus, it is very important that contracters make accurate and realistic basic design plan in a short period of time. To deal with such a situation, we propose a systems engineering approach for the analysis and management of the technical risk. Specifically, we first: 1) Analyzes technical risk related with the plant design information for the bidders, followed by 2) Developing stakeholder requirements for the basic engineering design, and 3) System requirements for dealing with technical risk. Also, in this paper, we proposed converting method from MOE(Measure of Effectiveness) to MOP(Measure of Performance) in the risk analysis. To show the effectiveness of the proposed method, we carried out a case study.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권3호
• /
• pp.99-104
• /
• 2002

lateral insulated gate bipolar transistors(LIGBTs) are extensively used in high voltage power IC application due to their low forward voltage drops. One of the main disadvantages of the LIGBT is its scow switching speed when compared to the LDMOSFET. And the LIGBT with reverse channel structure is lower current capability than the conventional LIGBT at the forward conduction mode. In this paper, the LIGBT which included p+ ring and p-channel gate is presented at the reverie channel structure. The presented LIGBT structure is proposed to suppress the latch up, efficiently and to improve the turn off time. It is shown to improve the current capability too. It is verified 2-D simulator, MEDICI. It is shown that the latch up current of new LIGBT is 10 times than that of the conventional LIGBT Additionally, it is shown that the turn off characteristics of the proposed LIGBT is i times than that of the conventional LIGBT. It is net presented the tail current of turn off characteristics at the proposed structure. And the presented LIGBT is not n+ buffer layer because it includes p channel gate and p+ ring.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.54-58
• /
• 2004

This paper presents the iron core design method of a high temperature superconducting (HTS) transformer considering voltages per turn (V/T). In this research, solenoid type HTS coils were selected for low voltage (LV) winding and double pancake coils for high voltage (HV) winding, just as in conventional large power transformers. V/T is one of the most fundamental elements used in designing transformers, as it decides the core cross sectional area and the number of primary and secondary winding turns. By controlling the V/T, the core dimension and core loss can be changed diversely. The leakage flux is another serious consideration in core design. The magnetic field perpendicular to the HTS wire causes its critical current to fall rapidly as the magnitude of the field increases slowly. Therefore in the design of iron core as well as superconducting windings, contemplation of leakage flux should be preceded. In this paper, the relationship between the V/T and core loss was observed and also, through computational calculations, the leakage magnetic fields perpendicular to the windings were found and their critical current decrement effects were considered in relation to the core design. The ％ impedance was calculated by way of the numerical method. Finally, various models were suggested.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1096-1099
• /
• 2001

The basic design structure of RC-GCTs (Reserve-Conducting Gate-Commutated Thyristors) is firstly given in this paper. The bulk of wafer is punch-through (PT) type with high resistivity and narrow N-base width. The photo-mask was designed upon the turn-off characteristics of GCT and solution of separation between GCT and diode part. The center part of Si wafer is free-wheeling diode (FWD) and outer is GCT part which has 240 fingers totally. The switching performance of GCT was investigated by Dessis of ISE. The basic manufacture process of 2500V-4500V RC-GCTs was given in this work. Additionally, the local carrier lifetime control by 5Mev proton irradiation was adopted so as to not only to have the softness of reverse recovering for FWD but for reduction of turn-off losses of GCT as well.

• 한국전문물리치료학회지
• /
• 제23권4호
• /
• pp.47-54
• /
• 2016

Background: Losing balance during locomotive actions becomes an increasing threat to both the community-dwelling elderly and elderly with Parkinson disease (PD). Those with PD may be at a high risk of fall due to particular characteristics during the turn. Turning around during locomotive actions may be one of problematic factors causing losing balance. Objects: This study is part of a larger study, which in part aims to identify turning strategies, to compare the strategies in the elderly with and without idiopathic PD aged 51 years and older and to distinguish whether the turning strategies can predict the elderly at risk of falls. Methods: A total of 22 community-dwelling elderlies (10 elderlies with idiopathic PD and 12 healthy elderlies) were investigated for the turning strategies during the timed up and go test. Results: There were some significant differences between the two groups during turning (p<.05). The idiopathic PD group had a tendency of challenging on taking more number of steps, more time to accomplish and staggering more for the turn relative to the control group. Conclusion: Taking more number of steps and more time to turn may be useful for distinguishing the characteristics of PD from that of the healthy elderly in turning strategy.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.11-18
• /
• 2015

This paper proposes a high-efficiency 3-kW hybrid ESS with emergency power supply. The proposed system enables efficient use of power from photovoltaic (PV) cells and energy storage system (ESS). The proposed system can operate as an uninterruptible power supply (UPS) when grid fault occurs, providing seamless transfer from grid-connected mode to stand-alone mode. The LLC converter for PV achieves ZVS turn-on of switches and ZCS turn-off of diodes, and the isolated bidirectional DC-DC converter for ESS achieves ZCS turn-off regardless of load condition, resulting in high efficiency. The efficiency and performance of the proposed hybrid ESS has been verified by a 3-kW prototype.