• 제목/요약/키워드: TOF method

검색결과 262건 처리시간 0.027초

Pd/TiO2 촉매를 이용한 HCO2K 광 분해 반응 (Photocatalytic Dehydrogenation of Potassium Formate Over Pd/TiO2)

  • 전미나;최수빈;도현미;박현서;윤창원;남석우
    • 한국수소및신에너지학회논문집
    • /
    • 제28권5호
    • /
    • pp.447-452
    • /
    • 2017
  • A $Pd/TiO_2$ catalyst was prepared by a conventional impregnation method, and further characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy. The as-prepared material was employed to accelerate dehydrogenation of potassium formate in the presence of light at different temperatures. The $Pd/TiO_2$ catalyst showed distinct dehydrogenation activities, and particularly, the material exhibited a higher turnover frequency (TOF) of $2,097h^{-1}$ at $80^{\circ}C$ after 10 minutes in the presence of light compared to that (TOF of $1,477h^{-1}$) obtained in the absence of light. Numerous analytical techniques suggest that the increased dehydrogenation activity likely originates from light-excited electron and hole at the photocatalyst, i.e., $TiO_2$, in conjunction with metal-support interaction.

단백질 분해효소를 이용한 오계 다리육 펩타이드 생산 최적화 (Optimization of enzymatic hydrolysis of legs proteins of black body fowl(Ogae) to produce peptides using a commercial protease)

  • 최소영;김아연;유선균
    • 한국응용과학기술학회지
    • /
    • 제33권1호
    • /
    • pp.176-185
    • /
    • 2016
  • 연산오계는 오래전부터 건강기능 증진 및 치료 효능이 높은 것으로 알려져 왔다. 최근 건강기능식품 소재로 기능성 펩타이드 효능이 알려짐에 따라, 연산오계 다리육으로부 올리고 펩타이드 최적 생산 공정 및 생성물 특성에 대하여 연구를 수행하였다. 최적 효소가수 분해 공정 표면반응 분석을 이용하여 수행하였다. 최적 공정 조건을 확립하기 위해서 온도 (40, 50, $60^{\circ}C$), pH (pH 6.0, 7.0, 8.0), 효소 (1, 2, 3%) 범위에서 수행을 하였다. 생성물에 대한 가수분해도, 유리아미노산, 분자량 분포를 분석하였다. 효소 가수분해 최적 온도는 $58^{\circ}C$, pH 7.5, 효소의 농도는 3% 이었다. 최적 조건에서 2 시간 효소 가수분해를 한 결과 75-80% 이었다. 유리 아미노산 총량은 168.131 mg/100 g 이었다. 분자량를 MALDI-TOF 으로 분석을 한 결과 90% 이상이 300-1,000 Da 분포를 보여주었다.

Characterization of Acetylene Plasma-Polymer Films: Recovery of Surface Hydrophobicity by Aging

  • Kim, Jeong-Ho;Kim, Tae-Hyung;Oh, Jung-Geun;Noh, Seok-Hwan;Lee, Jeong-Soo;Park, Kyu-Ho;Ha, Sam-Chul;Kang, Heon
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권11호
    • /
    • pp.2589-2594
    • /
    • 2009
  • Aging phenomena of plasma polymer films were studied by using the surface analysis techniques of contact angle measurement, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOFSIMS), and atomic force microscopy (AFM). The polymer films were grown on an aluminum substrate by using a plasma polymerization method from a gas mixture of acetylene and helium, and the films were subsequently modified to have a hydrophilic surface by oxygen plasma treatment. Aging of the polymer films was examined by exposing the samples to water and air environments. The aging process increased the hydrophobicity of the surface, as revealed by an increase in the advancing contact angle of water. XPS analysis showed that the population of oxygen-containing polar groups increased due to the uptake of oxygen during the aging, whereas TOF-SIMS analysis revealed a decrease in the polar group population in the uppermost surface layer. The results suggest that the change in surface property from hydrophilic to hydrophobic nature results from the restructuring of polymer chains near the surface, rather than compositional change of the surface. Oxidative degradation may enhance the mobility and the restructuring process of polymer chains.

돼지 난포 발달 시 과립막 세포에서 발현되는 단백질의 변화 (Changing Proteins in Granulosa Cells during Follicular Development in Pig)

  • 채인순;장동민;정희태;양부근;박춘근
    • Reproductive and Developmental Biology
    • /
    • 제33권3호
    • /
    • pp.183-187
    • /
    • 2009
  • This study analyzed change of proteins in granulosa cells during the porcine follicuar development by proteomics techniques. Granulosa cells of the follicles, of which the diameter is $2{\sim}4\;mm$ and $6{\sim}10\;mm$, were collected from ovary of slaughtered pig that each follicle of diameter $1{\sim}4\;mm$ and $6{\sim}10\;mm$. We extracted glanulosa cell proteins by M-PER Mammalian Protein Extraction Reagent. Proteins were refined by clean-up kit and quantified by Bradford method until total protein was $200{\mu}l$. Immobilized pH gradient(IPG) strip used 18 cm, $3{\sim}10\;NL$. SDS-PAGE used 10% acrylamide gel. After silver staining, Melanie 7 and naked eye test were used for spot analyzation. Increasing proteins in glanulosa cell of $6{\sim}10\;mm$ follicle were 7 spots. This spots were analyzed by MALDI-TOF MS and searched on NCBInr. In results, 7 spots were similar to zinc/ling finger protein 3 precursor (RING finger protein 203), angiomotin, heat shock 60 kDa protein 1 (chaperonin) isoform 1 (HSP60), similar to transducin-like enhancer protein 1 (TLE 1), SH3 and PX domains 2A (SH3PXD2A). Those proteins were related with transfer between cells. Increase of proteins has an effect on follicular development.

Ultrasonic Estimation and FE Analysis of Elastic Modulus of Kelvin Foam

  • Kim, Nohyu;Yang, Seungyong
    • 비파괴검사학회지
    • /
    • 제36권1호
    • /
    • pp.9-17
    • /
    • 2016
  • The elastic modulus of a 3D-printed Kelvin foam plate is investigated by measuring the acoustic wave velocity of 1 MHz ultrasound. An isotropic tetrakaidecahedron foam with 3 mm unit cell is designed and printed layer upon layer to fabricate a Kelvin foam plate of 14 mm thickness with a 3D CAD/printer using ABS plastic. The Kelvin foam plate is completely filled with paraffin wax for impedance matching, so that the acoustic wave may propagate through the porous foam plate. The acoustic wave velocity of the foam plate is measured using the time-of-flight (TOF) method and is used to calculate the elastic modulus of the Kelvin foam plate based on acousto-elasticity. Finite element method (FEM) and micromechanics is applied to the Kelvin foam plate to calculate the theoretical elastic modulus using a non-isotropic tetrakaidecahedron model. The predicted elastic modulus of the Kelvin foam plate from FEM and micromechanics model is similar, which is only 3-4% of the bulk material. The experimental value of the elastic modulus from the ultrasonic method is approximately twice as that of the numerical and theoretical methods because of the flexural deformation of the cell edges neglected in the ultrasonic method.

카메라 보정 오류에 강건한 깊이맵 업샘플링 기술 (A Robust Depth Map Upsampling Against Camera Calibration Errors)

  • 김재광;이재호;김창익
    • 대한전자공학회논문지SP
    • /
    • 제48권6호
    • /
    • pp.8-17
    • /
    • 2011
  • 최근 비행시간 (Time-of-Flight, TOF) 원리에 기반한 깊이 카메라의 등장과 함께 저해상도 깊이 카메라와 고해상도 컬러 카메라로 이루어진 복합형 카메라 시스템 (Fusion Camera System) 이 각광을 받고 있다. 복합형 카메라 시스템에서 취득한 저해상도 깊이맵을 컬러 영상과 같은 영상 평면 (Image Plane) 에 위치시키고 같은 해상도를 가질 수 있게 하려면 카메라 보정 및 3차원 투영, 홀 (Hole) 채우기와 같은 일련의 전처리 과정이 필요하다. 그러나 전처리 과정을 거친 깊이맵은 깊이 카메라의 내부 특성, 카메라 보정의 부정확성 등에 의해 많은 오차를 가진다. 그러므로 본 논문에서는 오차가 많은 상황에서도 강건하게 동작하는 깊이맵 업샘플링 방법을 제안한다. 먼저, 전처리 과정을 통해 얻은 깊이 정보의 신뢰도를 컬러 영상과의 상관관계에 기반하여 측정한다. 그리고 낮은 신뢰도의 깊이 정보를 참조하지 않는 수정된 커널 회기법 (Kernel Regression)을 통해 깊이맵과 컬러 영상의 경계 정합을 수행하여 세밀한 깊이 표현이 가능한 고해상도 깊이맵을 형성한다. 제안하는 알고리즘은 깊이 정보의 신뢰도 정의와 그에 따른 참조를 통해 카메라 보정 결과가 부정확하더라도 높은 성능의 깊이맵 생성을 보장한다. 실험결과를 통해 기존의 깊이맵 업샘플링 기술보다 제안하는 방법이 더 정확한 깊이 정보를 제공하는 것을 확인할 수 있다.

고공간분해능 연속 광원을 이용한 미세먼지 라이다의 신호 특성에 관한 연구 (A Study of the Characteristics of Highly Spatially Resolved CW-laser-based Aerosol Lidar)

  • 심주현;김태경;주소희;노영민;김덕현
    • 한국광학회지
    • /
    • 제33권1호
    • /
    • pp.1-10
    • /
    • 2022
  • 본 연구에서는 고가의 일반 펄스 레이저 없이 비교적 근거리에서 강한 거리 분해능을 지니며, 원거리에서도 공간 분해능을 지닌 연속광원 레이저를 이용한 미세먼지 라이다를 제안한다. 일반적인 라이다 시스템은 짧은 펄스의 레이저를 사용하고, 특정 거리 사이의 time-of-flight (TOF) 왕복시간을 측정하여 거리 정보를 얻고 있으나, 본 연구에서는 상용 카메라와 연속광 레이저 빔을 조사하여 얻은 영상을 사용하여 공간 분해능을 얻는 새로운 에어로졸 라이다를 소개한다. 본 연구에서는 라이다 신호와 함께 얻은 레이저의 이미지를 사용하여 주어진 하나의 화소에 해당하는 산란 에어로졸까지의 거리와 그 화소에 기여하는 에어로졸의 범위를 계산하였다. 이러한 거리와 기여 범위를 사용하여 거리 분해능을 갖는 에어로졸의 소멸계수를 계산하였으며, 기존 에어로졸 라이더의 경우 400 m 이상에서만 에어로졸 소산계수를 얻을 수 있었지만 제안 된 방법과 주어진 카메라의 조건을 사용하면 수십 미터 이하까지 그 소산계수를 얻을 수 있음을 알 수 있었다.

단백체 스펙트럼 데이터의 분류를 위한 랜덤 포리스트 기반 특성 선택 알고리즘 (Feature Selection for Classification of Mass Spectrometric Proteomic Data Using Random Forest)

  • 온승엽;지승도;한미영
    • 한국시뮬레이션학회논문지
    • /
    • 제22권4호
    • /
    • pp.139-147
    • /
    • 2013
  • 본 논문에서는 질량 분석 방법에 의하여 산출된 단백체 데이터(mass spectrometric proteomic data)의 분류 분석(classification analysis)을 위한 새로운 특성 선택(feature selection) 방법을 제안한다. 이 방법은 i)높은 상관관계를 가지는 중복된 특성을 효과적으로 제거하는 전처리 단계와 ii)토너먼트(tournament) 전략을 사용하여 최적 특성 부분집합(optimal feature subset)을 탐색해 내는 단계로 구성되어 있다. 제안되는 방법을 실제 암진단에 사용되는 공개된 혈액 단백체 데이터에 적용하였으며 널리 사용되는 타 방법과 비교할 때 우수한 성능과 균형된 특이도와 민감도를 달성함을 실증하였다.

Intestinal Absorption of Fibrinolytic and Proteolytic Lumbrokinase Extracted from Earthworm, Eisenia andrei

  • Yan, Xiang Mei;Kim, Chung-Hyo;Lee, Chul-Kyu;Shin, Jang-Sik;Cho, Il-Hwan;Sohn, Uy-Dong
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제14권2호
    • /
    • pp.71-75
    • /
    • 2010
  • To investigate the intestinal absorption of a fibrinolytic and proteolytic lumbrokinase extracted from Eisenia andrei, we used rat everted gut sacs and an in situ closed-loop recirculation method. We extracted lumbrokinase from Eisenia andrei, and then raised polyclonal antibody against lumbrokinase. Fibrinolytic activity and proteolytic activity in the serosal side of rat everted gut sacs incubated with lumbrokinase showed dose- and time-dependent patterns. Immunological results obtained by western blotting serosal side solution using rat everted gut sacs method showed that lumbrokinase proteins between 33.6 and 54.7 kDa are absorbed mostly by the intestinal epithelium. Furthermore, MALDI- TOF mass spectrometric analysis of plasma fractions obtained by in situ recirculation method confirmed that lumbrokinase F1 is absorbed into blood. These results support the notion that lumbrokinase can be absorbed from mucosal lumen into blood by oral administration.

$SF_6$-Ar 혼합기체(混合氣體)의 전자(電子) 평균(平均)에너지 (Mean energy of electrons in $SF_6$-Ar Mixtures Gas)

  • 김상남;성낙진
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.75-78
    • /
    • 2003
  • Energy distribution function for electrons in $SF_6$-Ar mixtures gas used by MCS-BEq algorithm has been analysed over the E/N range $30\sim300$[Td] by a two term Boltzmann equation and by a Monte Carlo Simulation using a set of electron cross sections determined by other authors, experimentally the electron swarm parameters for 0.2[%] and 0.5[%] $SF_6$-Ar mixtures were measured by time-of-flight(TOF) method. The results show that the deduced electron drift velocities, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients and mean energy agree reasonably well with theoretical for a rang of E/N values. The transport coefficients for electrons in (0.2[%])$SF_6$-Ar and (0.5[%]$SF_6$ - Ar mixtures were measured by time-of-flight method, and the electron energy distribution function and the parameters of the velocity and the diffusion were determined by the variation of the collision cross-sections with energy. The results obtained from Boltzmann equation method and Monte Carlo simulation have been compared with present and previously obtained data and respective set of electron collision cross sections of the molecules.

  • PDF