• 한국환경과학회지
• /
• 제30권1호
• /
• pp.57-67
• /
• 2021

Photocatalytic green energy H2 production utilizing inexhaustible solar energy has been considered as a potential solution to problems of energy scarcity and environmental contamination. However, the design of a cost-effective photocatalyst using simple synthesis methodology is still a grand challenge. Herein, a low-cost transition metal, Cu-loaded one-dimensional TiO2 nanorods (Cu/TNR) were fabricated using an easy-to-use synthesis methodology for significant H2 production under simulated solar light. X-ray photoelectron spectral studies and electron microscopy measurements provide evidence to support the successful formation of the Cu/TNR catalyst under our experimental conditions. UV-vis DRS studies further demonstrate that introducing Cu on the surface of TNR substantially increases light absorption in the visible range. Notably, the Cu/TNR catalyst with optimum Cu content, achieved a remarkable H2 production with a yield of 39,239 µmol/g after 3 h of solar light illumination, representing 7.4- and 27.7-fold enhancements against TNR and commercial P25, respectively. The notably improved H2 evolution activity of the target Cu/TNR catalyst was primarily attributed to its excellent separation and efficiently hampered recombination of photoexcited electron-hole pairs. The Cu/TNR catalyst is, therefore, a potential candidate for photocatalytic green energy applications.

• Communications for Statistical Applications and Methods
• /
• 제28권2호
• /
• pp.161-169
• /
• 2021

The two-dimensional confusion matrix used in credit assessment, biostatistics, and many other fields consists of true positive, true negative, false positive, and false negative. Their rates, such as the true positive rate (TPR), true negative rate (TNR), false positive rate, and false negative rate, can be applied to measure its accuracy. In this study, we propose the TPR-TNR plot, a graphical method that can geometrically describe and explain these rates based on the confusion matrix. The proposed TPR-TNR plot consists of two right-angled triangles. We obtain that the TPR and TNR describe the acute angles of right-angled triangles in the plot. These acute angles can be used to determine optimal thresholds corresponding to lots of accuracy measures.

• 핵의학기술
• /
• 제27권1호
• /
• pp.62-65
• /
• 2023

Purpose The purpose of this study is to determine whether the glucose loading method (GLM) is useful in the differentiation of cerebral gliomas by comparing it with fasting images. Materials and Methods The patients were 70 people diagnosed with cerebral gliomas, and the equipment was Discovery 710 (GE Healthcare, MI, USA). All patients fasted for more than 6 hours, and fasting images and GLM were performed under the same imaging conditions, and the examination interval was 1 to 14 days. GLM administered 250 ㎖ of 10% glucose solution prior to radiopharmaceutical injection. SUVmax of cerebral glioma and SUVmean of cerebral cortex were measured and then compared and analyzed by tumor-to-normal brain cortex ratio (TNR). Statistical analysis confirmed the difference between the two images with an independent-sample t-test. Results The averages of GLM and fasting TNR were 1.26 and 1.09, respectively, which were 15.6% higher in GLM. In low-grade, the difference in TNR was insignificant at 4%, but in high-grade, 23%, GLM was high. There was a statistically significant difference between the two images (P=0.008), but there was no statistically significant difference in TNR in the low grade (P=0.473), and there was a very significant difference in the high grade (P=0.005). Conclusion GLM increased TNR for cerebral gliomas. In particular, it was found that the TNR increased more in the high grade. Therefore, GLM is considered to be useful for the differentiation of high-grade gliomas.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2765-2768
• /
• 2013

The effect of $TiO_2$ nanorods (TNR) and nanoparticles (TNP) composite photoelectrodes and the role of TNR to enhance the energy conversion efficiency in dye-sensitized solar cells (DSSCs) was investigated. The 5% TNR content into the TNP photoelectrode significantly increased the short-circuit current density ($J_{sc}$) and the open-circuit potential ($V_{oc}$) with the overall energy conversion efficiency enhancement of 13.6% compared to the pure TNP photoelectrode. From the photochemical and impedemetric analysis, the increased $J_{sc}$ and $V_{oc}$ for the 5% TNR/TNP composite photoelectrode was attributed to the scattering effect of TNR, reduced electron diffusion path and the suppression of charge recombination between the composite photoelectrode and electrolyte or dye.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.48-54
• /
• 1996

The continuous deformation , multistage deformation and stress relaxation were carried out to investigate the strain induced procipitation by torsion tests in the range of 1000∼800$^{\circ}C$, 0.05/sec∼5/sec for V-microalloyed steel. The starting temperature and time for the initiation of precipitation were determined by stress relaxation tests and the distribution of percipitates increased at higher strain rate and the mean size of precipitates was found to be about 50nm. The precipitation starting time decreased with increasing strain rate from 0.05/sec to 5 /sec and pre-strain. The effect of deformation conditions on the no-recrystallization temperature(Tnr) was determined in the multistage deformation with declining temerature. The Tnr decreased with increasing strain and strain rae. In the controlled rolling, grain refinement and precpitation hardening effects could be achieved by the alternative large pass strain at the latter half pass stage under the condition of low temperature and high strain rate.

• 소성∙가공
• /
• 제6권2호
• /
• pp.102-109
• /
• 1997

The multistage deformation and stress relaxation were carried out to investigate the strain induced precipitation by torsion tests in the range of 1000~80$0^{\circ}C$, 0.05~5/sec for V-microalloyed steel. The starting temperature and time for the initiation of precipitation were determined by stress relaxation tests. The distribution of precipitates increased, as the strain rate increased and the mean size of precipitates was found to be about 10~30nm. The precipitation starting time$(P_s)$ decreased with increasing strain rate and the amount of pre-strain. The effect of deformation conditions on the no-recrystallization temperature$(T_nr)$ was also determined in the multistage deformation. $T_nr$ Tnr decreased with increasing the strain and strain rate. In the controlled rolling simulation, grain refinement and precipitation hardening effects could be achieved by the alternative large pass strain at the latter half pass stage under the condition of low temperature and high strain rate.

• Journal of Genetic Medicine
• /
• 제11권2호
• /
• pp.69-73
• /
• 2014

Purpose: Spinocerebellar ataxia (SCA) is a genetically heterogeneous disease for which more than 30 subtypes have been identified. However, 5 subtypes, SCA1, SCA2, SCA3, SCA6, and SCA7, account for more than 60% of cases. In this study, we report the distribution of these 5 subtypes in Korean patients. Materials and Methods: Six hundred and thirty-eight unrelated patients with a presumptive diagnosis of SCA were included in this study. Trinucleotide (CAG) repeat number (TNR) repeat number was determined using fluorescently labeled primers and fragment analysis. Results: A total of 128 unrelated patients (20.1% of all individuals tested) tested positive for SCA subtypes, including SCA1 (5 patients, 3.9% of those testing positive), SCA2 (38 patients, 29.7%), SCA3 (30 patients, 23.4%), SCA6 (39 patients, 30.5%), and SCA7 (16 patients, 12.5%). The mean copy number of pathogenic TNR alleles was $45{\pm}8.5$ for SCA1, $42{\pm}3.1$ for SCA2, $72{\pm}5.4$ for SCA3, $23{\pm}1.5$ for SCA6, and $50{\pm}11.4$ for SCA7. TNR copy number was inversely correlated with onset age in SCA2, SCA6, and SCA7. Conclusion: SCA2, SCA3, and SCA6 are common SCA subtypes in Korean patients and could be screened as a first-line test. Expanded pathogenic allele size was associated with early onset age.

• 응용통계연구
• /
• 제34권2호
• /
• pp.225-238
• /
• 2021

이진분류모형의 성능을 탐색하는 시각적인 대표적인 방법인 ROC 곡선과 TOC 곡선 그리고 TROC 곡선은 혼동행렬을 구성하는 TP, TN, FP, FN 그리고 이들의 비율인 TPR, TNR, FPR, FNR으로 구현된다. 본 연구에서는 두 종류의 비율비인 오즈를 고려하여 단위면적인 정사각형에서의 구현하는 오즈 곡선을 제안하고, ROC 곡선과의 관계를 보인다. 오즈 곡선에서 판별력을 측정하는 두 종류의 측도를 제안하고, 오즈 곡선들의 형태를 바탕으로 두 종류의 측도를 이용하여 두 분류 분포의 판단 기준을 설정한다. 본 연구에서 제안한 오즈 곡선은 다른 시각적인 방법 등과 같이 유용하게 사용할 수 있으며, 오즈 곡선의 판별력을 측정하는 두 종류의 측도들은 분류 성능을 판단하는 대안적인 방법으로 같이 이용할 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.77-80
• /
• 1997

The torsion tests in the range of 900~110$0^{\circ}C$, 5.0$\times$10-2~5.0$\times$100/sec were performed to study the recry stallization behavior of 304 stainless steel in the high temperature multistage deformation. The no-recrystallization temperature(Tnr) and fractional softening(FS) were determined by the change of flow curves. The inflection points of stress slope were moved to lower temperature area as the strain rate and the interrupt time were increased. From the multipass flow curve, the intersection between pass stress and FS curve was corresponding to the pass which the FS dropped abruptly and it was shown that the recrystallization area could be determined by the FS measurement in multipass deformation.

• 산업기술연구
• /
• 제35권
• /
• pp.41-45
• /
• 2015

This paper presents a development of the ELB (Electronic Leakage Breaker) based on a reduction of standby power dissipation as with maintaining conventional performance. In order to minimize the standby power consumption of the conventional circuit, we analyze the cause of 0.3W dissipation of the circuit. By employing the TR-triggered circuit to secure the standby power of 0.10W after testing and evaluation while CRD inserted circuit showed the performance of 0.17W levels. Implementing SMPS IC and TNR device circuit was designed and showed of its power to less than 0.06W. Developed ELB is expected much standby power savings in large power distributor or heavy users.