• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.195-201
• /
• 2016

An experimental study has been found the air guide grooves for reducing drag. When a bullet is fired and move in the air, the drag is generated. The vortex which is one of the types of drag hinders the movement of the bullet. To solve this phenomenon, cut a negative grooves that we are called the air guiding grooves at the back of bullet. The grooves bullet has identified that the drag compared to conventional ammunition(KM80 and K193) is reduced to 4.480 and 4.054 : 10 % through a Finite Analysis Program($Ansys^{TM}$). Even pressure center was retreating 0.72 % compared to a Bullet(KM80 and K193). Effect obtained with these results is the accuracy of the grooves bullet in a shooting test was improved by over 32 %(KM80: 2.86, air guide grooves : 1.94) compared to conventional ammunition(KM80 and K193). In addition, muzzle velocity is increased 73 m/s. This is expected to be extended the velocity and effective range of bullet. Also, the velocity of the grooves bullet is increased when moving in the air while the velocity of the bullet(KM80 and K193) is reduced. The gas ejected from the muzzle to be balanced and stable flight of the Bullet. Given these effects, we can reckon the air guide grooves have positive influence.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• Development and Reproduction
• /
• v.22 no.1
• /
• pp.73-83
• /
• 2018

This study investigates the endoplasmic reticulum (ER) stress and subsequent apoptosis in duced during somatic cell nuclear transfer (SCNT) process of porcine SCNT embryos. Porcine SCNT and in vitro fertilization (IVF) embryos were sampled at 3 h and 20 h after SCNT or IVF and at the blastocyst stage for mRNA extraction. The x-box binding protein 1 (Xbp1) mRNA and the expressions of ER stress-associated genes were confirmed by RT-PCR or RT-qPCR. Apoptotic gene expression was analyzed by RT-PCR. Before commencing SCNT, somatic cells treated with tunicamycin (TM), an ER stress inducer, confirmed the splicing of Xbp1 mRNA and increased expressions of ER stress-associated genes. In all the embryonic stages, the SCNT embryos, when compared with the IVF embryos, showed slightly increased expression of spliced Xbp1 (Xbp1s) mRNA and significantly increased expression of ER stress-associated genes (p<0.05). In all stages, apoptotic gene expression was slightly higher in the SCNT embryos, but not significantly different from that of the IVF embryos except for the Bax/Bcl2L1 ratio in the 1-cell stage (p<0.05). The result of this study indicates that excessive ER stress can be induced by the SCNT process, which induce apoptosis of SCNT embryos.

• Journal of Animal Science and Technology
• /
• v.57 no.5
• /
• pp.19.1-19.6
• /
• 2015

The objective of this study was to estimate variance components and genetic parameters for growth curve parameters in Guilan sheep. Studied traits were parameters of Brody growth model which included A (asymptotic mature weight), B (initial animal weight) and K (maturation rate). The data set and pedigree information used in this study were obtained from the Agricultural Organization of Guilan province (Rasht, Iran) and comprised 8647 growth curve records of lambs from birth to 240 days of age during 1994 to 2014. Marginal posterior distributions of parameters and variance components were estimated using TM program. The Gibbs sampler was run 300000 rounds and the first 60000 rounds were discarded as a burn-in period. Posterior mean estimates of direct heritabilities for A, B and K were 0.39, 0.23 and 0.039, respectively. Estimates of direct genetic correlation between growth curve parameters were 0.57, 0.03 and -0.01 between A-B, A-K and B-K, respectively. Estimates of direct genetic trends for A, B and K were positive and their corresponding values were $0.014{\pm}0.003$ (P < 0.001), $0.0012{\pm}0.0009$ (P > 0.05) and $0.000002{\pm}0.0001$ (P > 0.05), respectively. Residual correlations between growth curve parameters varied form -0.52 (between A-K) to 0.48 (between A-B). Also, phenotypic correlations between growth curve parameters varied form -0.49 (between A-K) to 0.47 (between A-B). The results of this study indicated that improvement of growth curve parameters of Guilan sheep seems feasible in selection programs. It is worthwhile to develop a selection strategy to obtain an appropriate shape of growth curve through changing genetically the parameters of growth model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.489-494
• /
• 2004

In this paper, we investigated impurities content and thermal properties showing by changing the content of carbon black which is semiconductive materials for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Impurities content of specimens was measured by ICP-AES(Inductively Coupled Plasma Atomic Emission Spectrometer), and density of specimens were measured by density meter. And then heat capacity(${\Delta}H$) and melting temperature(Tm), specific heat(Cp) were measured by DSC(Differential Scanning Calorimetry). The dimension of measurement temperature was $0[^{\circ}C]\;to\;200[^{\circ}C]$, and rising temperature was $4[^{\circ}C/min]$. Impurities content was highly measured according to increasing the content of carbon black from this experimental result also density was increased according to these properties. Specially, impurities content values of the A1 and A2 of existing resins were measured more than 4000[ppm]. Heat capacity, melting temperature, and specific heat from the DSC results were simultaneously decreased according to increasing the content of carbon black. Because metallic impurities of carbon black having Fe, Co, Mn, A1 and Zn are rapidly passed kinetic energy increasing the number of times breaking during the unit time with the near particles according to increasing vibration of particles by the applied heat energy.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.515-524
• /
• 1998

The purposes of this study were to observe the cavity wall morphology and to evaluate the degree of cavity cleanliness when root-end retrograde cavity preparation was done with ultrasonic diamond instruments. To observe the morphology of retrocavity and to evaluate the degree of cavity cleanliness. root-end resections were done on 20 palatal roots of extracted maxillary first molars after canal filling with gutta-percha. Retrocavities were prepared using either ultrasonic diamond instruments or stainless steel ones of medium power setting of level 6 ($Miniendo^{TM}$, EIE, CA, U.S.A.). Morphology of the cavity. degrees of the remaining canal debris and smear layer were evaluated under the scanning electron microscope. The results were as follows: Cavities prepared with ultrasonic diamond instruments showed scratched appearance of wall, while ultrasonic stainless steel preparation showed hatcheted appearance. Ultrasonic diamond instruments induced more smear layer than stainless steel ones did (p<0.01) in the cavity. However, there was no significant difference in canal debris (p>0.05).

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.31-46
• /
• 1997

In recent years, as remotly-sensed image processing technologies have been improved and spread widely in the application areas, many new requirements for the image processing technologies have arisen. However, it is difficult and costly to access remotely-sensed image processing systems. Moreover, these systems have thier own processing facilities which are not easily accessible for general users. In this paper, those problems are challenged by adopting Internet as a universal information network for accessing remotly-sensed image DBMS and by allowing users to work remotely on the image processing. A remotly-sensed image processing system which can be accessed via Internet was designed and implemented. This system can be used to manipulate images over remote DBMS. The Illustra object-oriented relational DBMS with CGI(Common Gateway Interface) web interface was used in this project. The client consists of a WWW(World Wide Web) Netscap$e^{TM}$ browser, and the server consists of HTTPD(Web daemon), Illustra DBMS and Java modules in order to process the image being displayed. The developed system was tested on LAN environment and the service response time met the requirements.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.807-816
• /
• 2018

Threat hunting is defined as a process of proactively and iteratively searching through networks to detect and isolate advanced threats that evade existing security solutions. The main concept of threat hunting is to find out weak points and remedy them before actual cyber threat has occurred. And HMM(Hunting Maturity Matrix) is suggested to evolve hunting processes with five levels, therefore, CSOC(Cyber Security Operations Center) can refer HMM how to make them safer from complicated and organized cyber attacks. We are developing a system for cyber situation awareness system with pro-active threat hunting process called unMazeTM. With this unMaze, it can be upgraded CSOC's HMM level from initial level to basic level. CSOC with unMaze do threat hunting process not only detecting existing cyber equipment post-actively, but also proactively detecting cyber threat by fusing and analyzing cyber asset data and threat intelligence.

• Journal of Radiation Protection and Research
• /
• v.44 no.3
• /
• pp.110-117
• /
• 2019

Background: This study aimed to estimate occupational doses and patient peak skin doses (PSDs) during interventional radiology procedures. Materials and Methods: We examined data from brain embolization (n = 30), hepatic chemoembolization (n = 50), and uterine embolization (n = 12). The PSDs were measured using radiochromic film around the patient's head (group 1) or abdominal/pelvic region (group 2). Acquisition technical data and kerma-area products (KAP) were also recorded. Occupational doses were measured using $Instadose^{TM}$ dosimeters near the left eye region (LER), chest, and left ankle. Results and Discussion: The third quartile (median) KAP values were $408.1(235.3)Gy{\cdot}cm^2$ for group 1 and $584.4(449.4)Gy{\cdot}cm^2$ for group 2. The average PSDs were greatest during vascular procedures, reaching 1,004.4 (786.4) mGy, and the highest PSD was 2,352.6 mGy (during hepatic chemoembolization). The third quartile (median) occupational doses were 0.35 (0.21) mSv at the LER, 0.25 (0.15) mSv at the chest, and 1.47 (0.64) mSv at the left ankle. Occupational doses at the LER were higher than at the chest, which highlights the importance of protective glasses and suspended shields. The occupational doses at the ankle region were also high, which highlights the importance of using a lead-lined curtain attached to the table. Conclusion: The results indicate that physicians can reach, for eye region, the weekly occupational dose limit after around 15 procedures, even when using proper protection. The average PSD values were below the threshold for tissue reactions, although the complexity of these procedures emphasises the importance of considering related risks.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.98-103
• /
• 2020

In this study, the depression behavior of zinc sulfate on the sphalerite with the addition of potassium butyl xanthate was investigated to clear the relationship between zinc sulfate and xanthate in depression of sphalerite. As a result of the experiment, it was confirmed that the depress effect of zinc sulfate on the sphalerite declined with the increase of its addition amount. From the results of SEM-EDS and FT-IR analysis, it was found out that the amorphous precipitate of metal xanthate (Zn-BX) was formed in sphalerite concentrate, when the solubility product of [Zn+]·[BX] in the pulp solution exceeded 3.71×10-11, which is the solubility of Zn-butyl xanthate. It is considered that the Zn-butyl xanthate had a negative effect on the depression of sphalerite.