• Magazine of the Korea Concrete Institute
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1991

Moleclar size distribution of three AC-20 asphalt cements were observed using high pressure - gel permeation chromatograph (HP-GPC). Bituminous concrete specimens were made using the asphalt cements and one aggre¬gate in laboratory to measure mechanical properties, tensile strength CIS) and resilient modulusCM,J. in dry and wet conditons. Results of mechanical property tests and profile of molecular size distribution of asphalt cements were analyzed to evaluate the relatonship of mechanical property with chromatogram. Regression analy¬sis showed a strong correlation between a mechanical property and sliced percent areas of chromatogram. Mathematical prediction models were developed based on the regression analysis. It was shown that characteris¬tics of asphalt cement chromatogram could be successfully used for estimation of selected mechanical property of asphalt concrete .

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.153-159
• /
• 1997

A thermally-driven polysilicon microactuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS(tetraethylorthosilicate) oxide as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And newly developed HF GPE(gas-phase etching) process was also employed to eliminate the troublesome stiction problem using anhydrous HF gas and CH$_{3}$OH vapor, and successfully fabricated the microactuators. The actuation is incurred by the thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon microactuator was experimentally conformed as large as 21 .mu. m at the input voltage level of 10V and 50Hz square wave. The actuating characteris- tics are also compared with the simulalted results considering heat transfer and thermal expansion in the polysilicon layer. This microactuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as microrelay, which requires large displacement or contact force but relatively slow response.

• Microbiology and Biotechnology Letters
• /
• v.20 no.1
• /
• pp.96-101
• /
• 1992

Two strains of polyvinyl alcohol (PVA) utilizing bacteria were isolated from the waste water and soil. These strains, G5Y and PW, were able to utilize PVA symbiotically as a carbon source, but could not utilize PVA separately. In the mixed culture of these strains, 0.5 percent of PVA was almost completely degraded in 3 days. Effect of degree of PVA polymerization on the its utilization was examined, and there was no remarkable difference among three kind of PVA (PVA 500, 1500, a d 2000). These bacteria were able to utilize PV,4 in the desizing waste water of factory as well as enrichment PVA medium. These strains, C5Y and PW, were identified as Pseudomonas cepucia and Pseudomonus pseudomallei, respectively, based on morpholofical and biological characteristics.

• The Journal of Information Technology
• /
• v.5 no.1
• /
• pp.143-156
• /
• 2002

Tourist Information Center has been played an important part of role in the promotion of tourism for both inbound and domestic market. The purpose of this paper is to examine the situation of our tourist information centers in context with information and personnel service. As a result we suggested some findings. According to studies, tourism information provided by TIC is critical and decisive for specific travel type and leisure travelers visit TIC more often than the other types of travelers. The specific aspects of tourism information is accuracy and currency which based on the characteristics of intangibility and perishability. According to this encouragement tourism information system should have to shifted to internet basis. This movement enabled tourism industry to make the atmosphere for portal or hub site for the effective operation of this system. The regionally networked system can make it possible to cope with some characteristics of tourism products. Reservations and information retrievals are major function of portal site. The data from suppliers (hotels, restaurants, event organizers, transportation, attractions etc) must be up-dated, controled by regional TIC and the connections should be extended among the regional TICs.

• Journal of TMJ Balancing Medicine
• /
• v.5 no.sup
• /
• pp.6-10
• /
• 2015

A 8 year-old male patient with tic disorder was managed by appliance of Functional Cerebrospinal Therapy (FCST) for 7 months, combined with acupuncture. After being treated for 7 months, the patient's symptoms were improved. Assessment was made by Yale Global Tic Severity Scale (YGTSS) and clinical observation. A positive effect was observed and further clinical and biological research on FCST is expected.

• School Mathematics
• /
• v.2 no.2
• /
• pp.357-388
• /
• 2000

This study aims to develop performance assessment tools for mathematics in the primary school. In order to achieve this aim, it reviews the tics in the primary school. In order to achieve this aim, it reviews the meaning and the purpose of mathematics performance assessment, and the characteristics of performance assessment tasks. Then the framework for portfolio developed in this study is introduced. This portfolio is called 'mathematical thinking and applying'. It aims at balanced assessment for improvement of mathematics instruction. It is composed of journal writhing, problem by the student, constructed task, work samples, written test, self assessment, teacher's comment and parents' comment. The criteria of performance tasks is categorized in impact, reasoning, accuracy and communication. The procedures of development of these tasks are as follows: the analysis of mathematics curriculum for the primary school, the design of performance tasks with considering teaching unit goals, designing rubrics, discussing these tasks with teachers in primary school, modifying them when is needed, observing the process of children's task performing, interviewing with teachers and final modifying. After performance assessment tasks are implemented, the answers by the students is analyzed using rubrics. Then anchor papers are selected. Also, the errors of children are analyzed. Through the process, teachers can obtain the information of children for improvement of mathematics instruction. Finally in order to generalize this study, I suggest that we need to cooperate with the field of education and to establish expert assessment groups.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.223-232
• /
• 1992

The ultimate purpose of this study is to build a model on clothing satisfaction which extends the consumer satisfaction model by unifying the exportation antecedents. In the literature study, it is proposed to clarify the concepts on the clothing satisfaction, and to investigate the present paradigms of the consumer satisfaction. It is widely accepted by the clothing researchers that the clothing satisfaction is a comparative process in which the evaluation criteria are used to judge the clothing product and to access the disconfirmation. In the Disconfirmation paradigm, the role of the expectation is very important. We propose to classify the expectation into the expective expectation and the normative expectation. The normative expectation applies when the investment cost and effort are considered. The expectation is shown to be affected by the expectation antecedents of the product characteris-tics, the situation characteristics, and the consumer characteristics. We investigate in detail those clothing satisfaction determinants and their measurement methods. Then, we build a clothing satisfaction model by the disconfirmation paradigm which is composed of the expectation antecedents, the expectation (expective expectation, normative expectation), the perceived clothing product performance, and the disconfirmation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.175-182
• /
• 1997

The purpose of this study is to investigate the effects of intake manifold shapes to improve the engine performance in a 3-cylinder LPG engine with a closed loop fuel supply system. To know the flow resistance of intake manifolds with shape, the intake negative pressure of each runner in intake manifolds were measured by using the digital pressure meter at each driving condition. And, the engine torque and power have been measured with an engine dynamometer while adjusting the optimal fuel consumption ratio with a solenoid driver. As 속 results form this experiment, the torque characteris- tics were more improved with the plenum chamber(B type intake manifold) than with the banana type(A type intake manifold). The torque characteristics were improved at mid-engine speed(rpm) range as the inner diameter of the intake manifold became smaller. And also the optimum volume among the examined plenum chamber volume was 0.74 times(590cc) the displacement of the test engine.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E3
• /
• pp.165-174
• /
• 2002

A dual -column biofilter system with two different composts was used to investigate the macro-kinetics of dim-ethyl disulfide (DMDS) degradation. The biofilter columns were filled with compost mixtures up to one meter, The gas How rate and DMDS concentration to the biofilters were varied to study their effect on the removal characteris-tics of DMDS. It was found that the biodegradation of DMDS was governed by zero-order reaction -limited macro-kinetics for inlet DMDS concentrations between 10 and 55 ppmv. The overall average zero-order kinetic coeffi-cient for DMDS removal by compost was 0.50 ($\pm$0.1) ppm/sec for both compost mixtures studied. Variations in individual kinetic coefficients were observed due to varying environmental conditions, such as pH and temperature. The kinetic coefficients determined are specific to the system discussed in this work. During high acidity conditions in the filter beds, methyl mercaptan (MM) was observed in the gas samples collected. Appearance of MM was pro-bably due to decreased microbial activity in the lower portions of the biofilter. Considering the neutral pH range required and the presence of methyl mercaptan, it is likely that the microorganisms present in the biofilters used in this research are similar to the T. thioparus (strain E6) species.

• Korean Journal of Biological Psychiatry
• /
• v.3 no.1
• /
• pp.30-36
• /
• 1996

Tardive dyskinesia is a syndrome of involuntary hyperkinetic abnormal movements that occurs during or shortly after the cessation of neuroleptic drug treatment. Typically, the movements are choreoatheoid. Other movements such as tics and dystonia may be present. Nonetheless, any dyskinesia seen in a neuroleptic-treated patient is not always neuroleptic-induced tardive dyskinesia. The prevalence of tardive dyskinesia varies widely, which reflects many methodological problems, such as differential diagnosis. symptom fluctuation, masking effect of neuroleptics, validated diagnostic criteria. Of suggested risk factors, only old age has been consistently found to be associated with an increased frequency of tardive dyskinesia. Many hypotheses about the pathophysiolgy of tardive kinesia are proposeed, but time-honored ones are not present. No consistently safe and effective treatments are found. Various treatment modalities signifies the general ineffectiveness of these agents for most patients. In general, reduction or cessation of neuroleptics, if possible, is recommended. Remission or improvemets of tardive dyskinesia after neuroleptics withdrawal usually occurs among most patients within three months.