• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.91-107
• /
• 1996

The purpose of this study was to investigate effects of osteoporosis on extraction wound healing in the calcium deficient rat. In order to carry out this study, ten-week old Wistar strain rats weighing about 300 gms were selected. When the rats reached thirteen-week old, rats' mandibular first molars were removed. The rats were then divided into three groups: Group l(rats given a normal diet both before and after tooth extraction), Group 2(rats given a low calcium diet for three weeks before tooth extraction and a normal diet after tooth extraction), and Group 3(rats given a low calcium diet for three weeks before and after tooth extraction). The healing of extraction wounds, as assessed by microradiography, autoradiography, and histopathologic examination, were compared among these three groups. The obtained results were as follows : I. In Group 1, newly formed bone and active uptake of 45Ca around extraction wound were noted on the 3rd and the 7th day. On the 14th and the 21st day, the extraction wounds of this group showed the bone trabecular formation and active 4Ca uptake in the extraction wound and alveolar crest. The more prominent bone trabeculae with a less uptake of /sup 45/Ca were noted on the 42nd day. 2. In Group 2, newly formed bone and thinning of alveolar bone trabeculae with more extensive uptake of /sup 45/Ca than that in Group 1 were noted on the 3rd and the 7th day. On the 14th day, bone trabeculae were less thicker than that in Group 1. The prominent bone trabeculae in the extraction wounds and alveolar crest were noted on the 21st and the 42nd days. 3. In Group 3, newly formed bone was noted on the 3rd and the 7th day. Alveolar bone trabeculae and uptake of /sup 45/Ca were similar to that in Group 2. On the 14th and 21st day, bone trabeculae were less thicker than that in Group 2 and Group 3. The osteoporotic change with active uptake of /sup 45/Ca was markedly noted on the 42nd day.

• Korean Journal of Environment and Ecology
• /
• v.23 no.4
• /
• pp.365-375
• /
• 2009

The growth characteristics of Pinus thunbergii windbreak forest around Goosipo Beach, Sangha-Myon, Gochang-Gun, Jeollabuk-Do have been investigated, and the results are summarized as follows. The soil in the site was light acid sand with pH 5.7, and the mean sodium concentration of soils was 1.42dS/m. The tree diameter, height, crown width, and shape ratio(Height/DBH) were better with tree density was coming lower. Especially, the rate of shape ratio under 60 was more in sites with low tree density. This demonstrated that the trees have grown more soundly when the tree density was lower. The direction of main winds and distribution ratio of tree inclination had a correlation. The inclined trees are seemed to be influenced by main winds when they were younger and by Typhoon partly. Eighty one vascular plant species were found in the sites, and more number of herbaceous plants (57 taxa) lived there than woody plants (24 taxa). And more plant species of dune were found at the site where dune have developed well. Some thinning works need at high tree density areas in order to ensure effects of coastal windbreak.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.577-583
• /
• 2016

Small-sized persimmons produced by high crop load are better accepted in the export markets. However, maintaining high crop load frequently results in weakness of tree vigor, deterioration of fruit quality, and increase of the risks for alternate bearing. This experiment was conducted to determine the combined effects of fertilization rate and leaf-fruit (L/F) ratio on container-grown 3-year-old 'Fuyu' persimmon trees. Application of 3.6-g N, 2.1-g $P_2O_5$, 2.7-g $K_2O$, 2.7-g CaO, and 0.6-g MgO was for the control fertilization rate (CF) and that of a 3-fold CF was for the high fertilization rate (HF). Commercial fertilizers were surface-applied to a container on July 6, July 17, and August 10 in three equal aliquots. Single tree for each fertilization rate was assigned for 12 L/F ratios (5, 6.3, 7.7, 9, 10.4, 13, 15.5, 18, 21, 24, 27, and 33) mostly by fruit thinning or rarely by defoliation on July 1. HF did not affect the yield, weight and soluble solids of the fruits but decreased skin color. As L/F ratio increased, yield decreased but average weight, skin color, and soluble solids of fruits increased. With HF, N and K concentrations in leaves, fruits, and shoots increased to some extent but soluble sugars in dormant shoots decreased. Many shoots were cold-injured with low L/F ratio especially at the HF. HF did not increase number of flower buds the next spring either on a shoot or on a tree basis but increased shoot length, compared with the CF. Increasing L/F ratio markedly increased number of flower buds and shoot growth the following year at both fertilization rates. Therefore, an appropriate combination of fertilization rate and L/F ratio should be necessary to maintain stable fruit production and tree vigor at high crop load.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.649-653
• /
• 2001

The Chiari malformation is a deformation within the central nervous system which the lower brain stem and the cerebellum migrate into the foramen magnum causing herniation. In 1891, Arnold Chiari classified such symptoms into 3 categories. This case report is of a 8-year-old female with the complaint of a slight facial swelling and pain on the upper right molar during tooth brushing since 10 days before. Clinical examination showed gingival pocket formation on distal of the upper right first molar with pain and mobility of the tooth. Radiographic examination showed generalized low bone density in the upper molar area, and especially no bone support above the upper right and left first molars were noted. With a temporary diagnosis of Early-onset periodontitis, consultations with medical doctors for the possibility of an underlying systemic disease were made during periodontal treatment. 3D CT was taken with after a final diagnosis of Chiari malformation. Generalized thinning and defect of the cranial bone was noted and the foramen magnum was slightly enlarged. The occipital and maxillary bone was low in density, and the alveolar bone of maxillary posterior teeth was especially almost non-existing causing the upper right and left first molar to be floating. For this, the patient went under consultation with the department of neurosurgery and is still under observation. Periodontitis in childreren is very rare. When symptoms of periodontitis appear in a child, due to the possibility of an underlying systemic disease such as leukemia, histiocytosis X, and hypophosphatasia, proper examinations should be carried out so that the primary factor the symptoms can be treated.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.486-493
• /
• 2013

The structure, morphology, and physical properties of syndiotatic poly(vinyl alcohol) (s-PVA) gel spun fibers were investigated to prepare polymeric embolization coils. S-PVA was prepared by saponification of the poly(vinyl acetate)/poly(vinyl pivalate)(PVAc/PVPi) copolymer. The viscosity of s-PVA solutions showed shear thinning behavior and the solution formed a homogeneous phase. Based on shear viscosity change with concentration, the optimum dope concentration was selected as 13 wt%, after which s-PVA fibers were spun and the solvent was removed. The fibers were then drawn with a maximum draw ratio of 15. A polymeric embolization coil was made of the s-PVA gel-spun fibers. The fibers were wound densely onto rigid rod and then annealed at different annealing temperatures. The polymeric embolization coil annealed at $200^{\circ}C$ was similar to metallic coils and its shape was maintained well after extension. Overall, gel-spun PVA fibers performed well for the preparation of primary and secondary coils to replace metallic coils.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.36-37
• /
• 1990

In the past, facile dissolution of cellulose has been hampered by the lack of suitable nondegrading solvents. Recently, this problem has been solved in our laboratory by the discovery of an inexpensive, convenient solvent system, that is the mixture of $NH_3\;and\;NH_4SCN$, for cellulose. Also, the $cellulose/NH_3/NH_4SCN$ solution system has been found to form the anisotropic, i.e., liquid crystalline phase. It is believed that both the cholesterio and the nematic phase occur. This finding has prompted extensive on-going researoh on the formation of the liquid crystalline phase from an inexpensive natural source such as cellulose since the nematic phase is envisioned as an excellent precursor sources for products with desirable properties, for example, high modulus and high strength. This interest naturally leads to a desire to understand the theological properties of the nematic phase so that the transformation of the nematic phase to the solid state with desirable properties can be efficiently accomplished, ;From this point of view, the theological behavior of the $cellulose/NH3_/NH_4SCN$ system has been studied as a function of shear rate and shear stress over a wide range of solvent compositions, cellulose concentration, centrifugation and urea contents, Results indicate that the viscosity decreases with increasing shear rate. A marked shear thinning behavior and a quasi-Newtonian behavior were observed in the low shear rate region and in the high shear rate region, respectively for all solvent compositions. The $cellulose/NH_3/NH_4SCN$ solution system only exhibited the viscosity increase with increasing cellulose concentration and failed to show the viscosity drop generally observed at the point of incipience of liquid crystal formation, This may be due to the gel-like nature of the solution by the association of the rodlike molecules into bundles which may serve as crosslinking points giving the cellulose solution a network structure. Also, simply hydrogen bonding may be so restrictive of molecular mobility that a viscosity drop is blocked. In addition to the above results, yield stress and thixotropy were also observed in the $cellulose/NH_3/NB_4SCN$ solution system which are characteristics of liquid crystal and gel, The results of the effect of centrifugation on viscosity show that viscosity decreases by the application of centrifugation. This may be explained by the change of the piled polydomain structure to the dispersed polydomain structure due to the pressure gradient generated during centrifugation.ation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.21-26
• /
• 2018

Thermoplastic starch (TPS) was prepared by mixing starch with glycerol as a plasticizer. The glycerol content ranged from 20 to 35 wt. % and TPS was prepared in a twin screw extruder. The shear viscosity, thermal and mechanical properties of the TPS were investigated. The viscosity of TPS exhibited typical shear thinning behavior: decreasing viscosity with increasing shear rate. The power index, n, increased with increasing glycerol content. This is because as the content of glycerol, a Newtonian fluid, increases, the viscosity behavior of the TPS becomes closer to that of a Newtonian fluid. The thermal behavior of TPS showed that starch and glycerol are miscible. In addition, when TPS was aged for more than one day at room temperature, TPS showed a partially miscible phase structure. The moisture absorbed into the TPS was assumed to change the phase behavior. The mechanical properties of TPS were found to be strongly dependent on the content of the plasticizer. Both the toughness and stiffness increased with increasing plasticizer content. DSC showed that this unusual result was due to the combined effect of humidity and the high amylose content in starch.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.318-323
• /
• 2014

In order to analyze the effect of maleic anhydride (MAH) content and styrene monomer (SM)/MAH mole ratio on reactive extrusion of maleic anhydride grafted random polypropylenes (MAH-g-rPP), MAH-g-rPPs were prepared by using a twin screw extruder. MAH contents were 0.5, 1.0, 3.0, and 5.0 phr and SM/initiator mole ratio was 0.0, 1.0, and 2.0. Dicumyl peroxide (DCP) was used as an initiator. The graft degree of MAH was confirmed by the existence of carbonyl group (C = O) stretching peak at $1700cm^{-1}$ from FT-IR spectrum. The degree of graft reaction increased up to 3.0 phr MAH and showed the optimum value at 1.0 SM/MAH mole ratio from the area ratio of C = O and C-H stretching peak. Thermal and crystallization properties of MAH-g-rPP and PP/MAH-g-rPP/pulp composites were investigated by DSC, TGA, XRD, and POM. There was a decrease in non-isothermal crystallization temperature of PP/MAH-g-PP/pulp composites. Based on tensile properties and SEM pictures for the fractured surface of PP/MAH-g-PP/pulp composites, MAH content of 1.0 wt% and SM/MAH mole ratio of 1.0 were the optimum formulation as the compatibilizer. The rheological properties of the composites were measured by dynamic Rheometer to compare the processability of the composites with and without compatibilizer. The power law index showed slightly low value at the composites with compatibilizer.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.122-128
• /
• 2015

This study aims to figure out the vegetation status and characteristics of the spatial distribution in Taeanhaean National Park. As a result, vegetation communities were Pinus thunbergii community, Pinus densiflora community, Pinus thunbergii-Pinus densiflora community, Camellia japonica community, Carpinus turczaninowii community, Carpinus turczaninowii-Pinus thunbergii community, Kalopanax septemlobus community, Koelreuteria paniculata community, Robinia pseudoacacia community, and sand dune and coastal wetland vegetation including Vitex rotundifolia community, Elymus mollis community, Calamagrostis epigeios community, Ischaemum anthephoroides community, Zoysia sinica community, Suaeda maritima community, and Phragmites communis community. Landscape types in actual vegetation map were Pinus thunbergii community (3.92%), Pinus densiflora community (1.40%), Robinia pseudoacacia community (0.05%), sand dune and coastal wetland vegetation (0.11%), field (0.46%), seashore (0.24%), thinning area (0.08%), bareground (0.16%), and sea (93.58%). Area of Pinus thunbergii community among vegetation type was $14.797km^2$ (3.92%) and the largest. Stratification structure and species composition of Pinus thunbergii community distributed in the seashore were different as a result of disturbance and human use. On the other hand, we assumed that succession will take place to the potential natural vegetation that is Quercus serrata and Quercus dentata in undisturbed Pinus thunbergii community. Meanwhile, Erechtites hieracifolia was occupied in understory of Pinus thunbergii community around the seashore and Diodia teres was invaded to sand dune vegetation. They may affect on natural species negatively. Therefore, monitoring and management plans are necessary.