• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.121-129
• /
• 2022

A study on water-based epoxy coated on mild steel using the electroplating method was conducted to optimize the process parameters for dry film thickness to achieve superior paint quality at optimal cost in an automotive plant. The regression model was used to adjust various parameters such as electrode voltage, bath temperature, processing time, non-volatile matter, and surface area to optimize the dry film thickness. The average dry film thickness computed using the model was in the range of 15 - 35 ㎛. The error in the computed dry film thickness with reference to the experimentally measured dry film thickness value was - 0.5809%, which was well within the acceptable limits of all paint shop standards. Our study showed that the dry film thickness on mild steel was more sensitive to electrode voltage and bath temperature than processing time. Further, the presence of non-volatile matter was found to have the maximum impact on dry film thickness.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.369-376
• /
• 2000

Change of magnetic properties in CoCrPt/Ti perpendicular media with varying CoCrPt films thickness has been studied. As CoCrPt films thickness increase, the Ms(magnetization saturation) drastically increases at thinner thickness and gradually increases with further increase in thickness from 25nm. This Ms behaviour is associated with primarily the formation of "amorphous-like" reacted layer by intermixing of CoCrPt and Ti at CoCrPt/Ti interface and secondarily change of Cr segregation mode with varying the CoCrPt films thickness. Magnetic domain structure distinctively changes with increasing CoCrPt magnetic layer(ML) thickness. Also the strength of exchange coupling measured from the slope in demagnetizing region in M-H loop changes with ML thickness. Details of the above magnetic properties will be discussed. The expansion of lattice parameters a and c at thinner thickness suggests that Cr segregation mode may be connected with the residual stress of the films. Finally, negative nucleation field(Hn) behaviour with the exchange slope will be reported.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.36-42
• /
• 2001

Usually, we use the flame thickness and turbulence scale to classify the flame structure on a phase diagram of turbulent combustion. The flame structure in turbulence is still in debate, and many studies have been done. Since the flame motion is rapid and its reaction zone thickness is very thin, it is difficult to estimate the flame thickness. Here, we propose a new approach to determine the reaction zone thickness based on ion current signals obtained by an electrostatic probe, which has enough time and space resolution to detect flame fluctuation. Since the signal depends on the flow condition and flame curvature, it may be difficult to analyze directly these signals and examine the flame characteristics. However, ion concentration is high only in the region where hydrocarbon-oxygen reactions occur, and we can specify the reaction zone. Based on the reaction zone existing, we estimate the reaction zone thickness. We obtain the thickness of flames both in the cyclone-jet combustor and on a Bunsen burner, compared with theoretically predicted value, the Zeldovich thickness. Results show that the experimentally obtained thickness is almost the same as the Zeldovich thickness. It is concluded that this approach can be used to obtain the local flame structure for modeling turbulent combustion.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.105-115
• /
• 2006

Thickness is a commonly used parameter in product design and manufacture. Its intuitive definition as the smallest dimension of a cross-section or the minimum distance between two opposite surfaces is ambiguous for intricate solids, and there is very little reported work in automatic computation of thickness. We present three generic definitions of thickness: interior thickness of points inside an object, exterior thickness for points on the object surface, and radiographic thickness along a view direction. Methods for computing and displaying the respective thickness values are also presented. The internal thickness distribution is obtained by peeling or successive skin removal, eventually revealing the object skeleton (similar to medial axis transformation). Another method involves radiographic scanning along a viewing direction, with minimum, maximum and total thickness options, displayed on the surface of the object. The algorithms have been implemented using an efficient voxel based representation that can handle up to one billion voxels (1000 per axis), coupled with a near-real time display scheme that uses a look-up table based on voxel neighborhood configurations. Three different types of intricate objects: industrial (press cylinder casting), sculpture (Ganesha idol), and medical (pelvic bone) were used for successfully testing the algorithms. The results are found to be useful for early evaluation of manufacturability and other lifecycle considerations.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.29-33
• /
• 2017

A method for analysis of thin film thickness in spectroscopic reflectometry is proposed. In spectroscopic reflectometry, there has been a trade-off between accuracy and computation speed using the conventional analysis algorithms. The trade-off originated from the nonlinearity of spectral reflectance with respect to film thickness. In this paper, the spectral phase is extracted from spectral reflectance, and the thickness of the film can be calculated by linear equations. By using the proposed method, film thickness can be measured very fast with high accuracy. The simulation result shows that the film thickness can be acquired with high accuracy. In the simulation, analysis error is lower than 0.01% in the thickness range from 100 nm to 4 um. The experiments also show good accuracy. Maximum error is under $40{\AA}$ in the thickness range $3,000-20,000{\AA}$. The experiments present that the proposed method is very fast. It takes only 2.6 s for volumetric thickness analysis of 640*480 pixels. The study suggests that the method can be a useful tool for the volumetric thickness measurement in display and semiconductor industries.

• Journal of Periodontal and Implant Science
• /
• 제46권6호
• /
• pp.372-381
• /
• 2016

Purpose: The aim of this study was to determine the relationship between buccal bone thickness and gingival thickness by means of a noninvasive and relatively accurate digital registration method. Methods: In 20 periodontally healthy subjects, cone-beam computed tomographic images and intraoral scanned files were obtained. Measurements of buccal bone thickness and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0-5 mm from the alveolar crest on the superimposed images. The Friedman test was used to compare buccal bone and gingival thickness for each depth between the 3 tooth types. Spearman's correlation coefficient was calculated to assess the correlation between buccal bone thickness and gingival thickness. Results: Of the central incisors, 77% of all sites had a buccal thickness of 0.5-1.0 mm, and 23% had a thickness of 1.0-1.5 mm. Of the lateral incisors, 71% of sites demonstrated a buccal bone thickness <1.0 mm, as did 63% of the canine sites. For gingival thickness, the proportion of sites <1.0 mm was 88%, 82%, and 91% for the central incisors, lateral incisors, and canines, respectively. Significant differences were observed in gingival thickness at the alveolar crest level (G0) between the central incisors and canines (P=0.032) and between the central incisors and lateral incisors (P=0.013). At 1 mm inferior to the alveolar crest, a difference was found between the central incisors and canines (P=0.025). The lateral incisors and canines showed a significant difference for buccal bone thickness 5 mm under the alveolar crest (P=0.025). Conclusions: The gingiva and buccal bone of the anterior maxillary teeth were found to be relatively thin (<1 mm) overall. A tendency was found for gingival thickness to increase and bone thickness to decrease toward the root apex. Differences were found between teeth at some positions, although the correlation between buccal bone thickness and soft tissue thickness was generally not significant.

• 한국초지조사료학회지
• /
• 제37권4호
• /
• pp.308-314
• /
• 2017

본 연구에서는 옥수수의 가공방법 및 옥수수의 두께의 차이가 반추위 in situ 소화율 및 in vitro 반추위 발효와 메탄 발생에 미치는 영향에 대하여 알아보고자 실시하였다. Micronized corn(2.5 mm thickness) 처리구는 다른 처리구들에 비하여 in situ 48시간 건물 분해율이 모든 배양시간대에서 높게(P<0.05) 나타났다. 반면, steam flaked corn(3.3 mm thickness) 처리구는 모든 배양시간대에서 가장 낮은(P<0.05) in situ 건물 분해율을 보였다. 반추위 내에서 미생물에 의해 분해되는 b fraction은 이와 상반되는 결과인 steam flaked corn(3.1 mm thickness)과 steam flaked corn(3.3 mm thickness) 처리구에서 높게(P<0.05) 나타났다. b fraction이 반추위를 통과하는 속도인 건물 분해상수 k값은 micronized corn(2.5 mm thickness) 처리구에서 가장 높게 (P<0.05) 나타났고 steam flaked corn(3.3 mm thickness) 처리구에서 가장 낮게 (P<0.05) 나타났다. 반추위내 시간당 통과속도를 0.05로 적용한 유효 건물 분해도는 건물 분해상수와 유사하게 micronized corn(2.5 mm thickness) 처리구에서 가장 높게 (P<0.05), steam flaked corn(3.3 mm thickness) 처리구에서 가장 낮게(P<0.05) 나타났다. In vitro 반추위 48시간 건물 소실율은 micronized corn(2.5 mm thickness) 처리구에서 가장 높은 경향을(P=0.088) 보인 반면 steam flaked corn 처리구들 사이에서는 두께에 따른 건물 소실율의 상관관계는 나타나지 않았다. 총 가스발생량 및 메탄 발생량에 있어서도 건물 소실율과 같은 결과인 micronized corn(2.5 mm thickness) 처리구에서 가장 높게 나타났으며(P=0.001), 총 휘발성지방산은 steam flaked corn(2.9 mm thickness)의 처리구에서 가장 높게 나타났으나(P=0.015) 나머지 처리구들에서는 유의적인 차이를 보이지 않았다. aectate: propionate의 비율 또한 steam flaked corn(2.9 mm thickness)의 처리구에서 가장 높게, micronized corn(2.5 mm thickness) 처리구에서 가장 낮게 나타났다(P=0.008). 본 연구의 결과를 종합하면 steam flaked corn 처리구들에서 in vitro 휘발성지방산 농도에 있어 in situ 반추위내 건물 분해상수와 유효 건물 분해도의 결과와 비교하여 상관관계가 나타나지 않은 결과로 유추해 보면 옥수수 가공방법에 의한 두께의 차이는 반추위 메탄 발생량에 영향을 미치지 않은 것으로 판단된다.

• 대한시과학회지
• /
• 제20권4호
• /
• pp.421-429
• /
• 2018

목적 : 굴절이상별 세 그룹으로 분류한 우리나라 아동들의 안축장과 빛간섭단층촬영(OCT)로 측정한 황반두께, 망막신경섬유층두께 사이의 상관성을 알아보고자 하였다. 방법 : 안질환이 없고 안과관련 수술 경험이 없는 아동 67명(134안)을 대상으로 원시, 정시, 근시 그룹으로 분류하였다. 황반부와 망막신경섬유층두께는 Cirrus HD-OCT를 이용하여 측정하였고, 안축장은 IOL Master를 이용하여 측정하였다. 결과 : 안축장은 근시, 정시, 원시그룹 순서로 길게 측정되었다(p<0.05). 중심부황반의 두께는 근시, 정시, 원시그룹 순서로 두껍게 측정되었다(p<0.05). 주변부황반부는위쪽, 코쪽, 아래쪽부분에서 근시그룹이 가장 얇았다(p<0.05).황반의 중심부 두께는 안축장과 양의 상관관계가 있었다(r=0.283, p<0.05). 주변부 황반의 두께는 모두 안축장과 음의 상관관계를 보였다. 귀쪽망막신경섬유층두께(Temporal RNFL Thickness)는 근시그룹이 가장 두꺼운 결과를 보였고,안축장과통계적으로 유의한 양의상관성이 나타났다(r=0.39, p<0.05). 위쪽과 코쪽, 아래쪽의 망막신경섬유층 두께는 안축장과 모두 음의 상관성을 나타냈다. 코쪽 부분의 두께는 통계적으로 유의하게 나타났다(r=-0.23, p<0.05). 결론 : 본 연구를 통해 우리나라 소아들의 OCT로 측정한 망막의 황반부의 두께, 망막신경섬유층의 두께와 안축장은 근시의 정도가 높을수록 안축장의 길이가 더 길게 측정되었으며, 굴절이상별 세 그룹에서 나타나는 차이점을 확인하였다.

• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.673-678
• /
• 2014

Background The depth of graft harvest and the residual dermis available for reepithelization primarily influence the healing of split-skin graft donor sites. When the thigh region is chosen, the authors hypothesize based on thickness measurements that the anterolateral region is the optimal donor site. Methods Full-thickness skin specimens were sampled from the anteromedial, anterior, and anterolateral regions of human cadavers. Skin specimens were cut perpendicularly with a custom-made precision apparatus to avoid the overestimation of thickness measurements. The combined epidermal and dermal thicknesses (overall skin thickness) were measured using a digital calliper. The specimens were histologically stained to visualize their basement membrane, and microscopy images were captured. Since the epidermal thickness varies across the specimen, a stereological method was used to eliminate observer bias. Results Epidermal thickness represented 2.5% to 9.9% of the overall skin thickness. There was a significant difference in epidermal thickness from one region to another (P<0.05). The anterolateral thigh region had the most consistent and highest mean epidermal thickness ($60{\pm}3.2{\mu}m$). We observed that overall skin thickness increased laterally from the anteromedial region to the anterior and anterolateral regions of the thigh. The overall skin thickness measured $1,032{\pm}435{\mu}m$ in the anteromedial region compared to $1,220{\pm}257{\mu}m$ in the anterolateral region. Conclusions Based on skin thickness measurements, the anterolateral thigh had the thickest epidermal and dermal layers. We suggest that the anterolateral thigh region is the optimal donor site for split-skin graft harvests from the thigh.

• 한국농공학회지
• /
• 제20권3호
• /
• pp.4750-4770
• /
• 1978

Under the various variations of the sample thickness, the load increment ratio and the load increment duration, this consolidation test of the clay in the Asan Bay was tried for the comparison with the standard consolidation test. The results gained are as follows; 1. The void ratio variations of the leached-clay samples were increasingly high, according as the sample thickness thinned and the load increment duration and the laod increment ratio increased. 2. The coefficient of consolidation were increased with the increment of the sample thickness, of the load increment ratio and of the load increment duration. Near the pre-consolidation load, the coefficient of secondary consolidation had the maximum value and lessened with the increment of the sample thicknss, and of the load increment duration 3. The value of the pre-consolidation load increased in proportion to the increment of the sample thickness and the decrease of the load increment ratio and the load increment duration. 4. The compression indices increased as the increment of load increased and decreased as the sample thickness increased. 5. The initial compression ratio increased as the sample thickness, the load increment ratio and the load increment duration decreased. The ratio of primary compression to the secondary decreased with the increment of the sample thickness and of the load increment ratio. 6. The time at the completion of psimary consolidation increased with the increment of the sample thickness and of the consolidation load, and with the decrease of the load increment ratio. 7. The compression indicses increaed as the sample thickness lessened and decreased as the load increment ratio increased. The coefficient of consolidation increased according as the sample thickness, the load increment ratio and the load increment duration went up. The settlement at the construction site should be calculated highly in proportion as the sample thickness lessened and the load increment ratio increased. The consolidation ratio is thought to be accelerated if the sample thickness and the load increment ratio becomes higher and the load increment duration longer.