• Title/Summary/Keyword: TE4

Search Result 1,195, Processing Time 0.027 seconds

Growth and Properties of $Cd_{1-x}$$Zn_x$/S Films Prepared by Chemical Bath Deposition for Photovoltaic Devices (Chemical Bath Depsoition법에 의한 $Cd_{1-x}$$Zn_x$/S 박막의 제조 및 특성에 관한 연구)

  • 송우창;이재형;김정호;박용관;양계준;유영식
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.14 no.2
    • /
    • pp.104-110
    • /
    • 2001
  • Structural, optical and electrical properties of Cd$_{1-x}$ Zn$_{x}$S films deposited by chemical bath deposition(CBD), which is a very attractive method for low-cost and large-area solar cells, are presented. Especially, in order to control more effectively the zinc component of the films, zinc acetate, which was used as the zinc source, was added in the reaction solution after preheating the reaction solution and the pH of the reaction solution decreased with increasing the concentration of zinc acetate. The films prepared after preheating and pH control had larger zinc component and higher optical band gap. The crystal structures of Cd$_{1-x}$ Zn$_{x}$S films was a wurtzite type with a preferential orientation of the (002) plane and the lattice constants of the films changed from the value for CdS to those for ZnS with increasing the mole ratio of the zinc acetate. The minimum lattice mismatch between Cd$_{1-x}$ Zn$_{x}$S and CdTe were 2.7% at the mole ratio of (ZnAc$_2$)/(CdAc$_2$+ZnAc$_2$)=0.4. As the more zinc substituted for Cd in the films, the optical transmittance improved, while the absorption edge shifted toward a shorterwavelength. the photoconductivity of the films was higher than the dark conductivity, while the ratio of those increased with increasing the mole ratio of zinc acetate. acetate.

  • PDF

A Study on Optimal Bit Loading Algorithms for Discrete MultiTone ADSL (DMT 변조방식을 사용하는 ADSL에서의 최적 비트 할당 방식 연구)

  • 이철우;박광철;윤기방;장수영;김기두
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.39 no.4
    • /
    • pp.395-402
    • /
    • 2002
  • In the conventional public switched telephone network(PSTN), there are various types of modulation that can be used in ADSL to offer fast data communication, two of which are CAP(Carrierless Amplitude Phase) and DMT(Discrete MultiTone). As we consider the current situation, DMT is getting more predominant in the market than CAP. One of the reasons is that it gives high performance in spite of its high complexity Since DMT divides the full range of bandwidth into 256 sub-channels, it can be highly adaptive in the circumstances, where the problems of attenuation and noise caused by the propagation distance are very crucial. In this paper, a new bit loading algorithm for DMT modulation is proposed. The proposed algorithm can be efficiently implemented in a way that it requires less computation than the conventional modulation techniques. In contrast to the conventional algorithms which perform sorting processing, the proposed algorithm uses look-up tables to reduce the repetition of calculation. Consequently, it is shown that less processing time and lower complexity can be achieved.

A Study on the Ultrasonic Inspection Method in High Attenuation Welds using Minimization-Polarity Threshold Algorithm (최소극 문턱치 알고리즘을 이용한 고감쇠 용접부에서 초음파 검사방법에 관한 연구)

  • Koo, Kil-Mo;Park, Chi-Seung;Choi, Jong-Ho;Ko, Duck-Young
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.37 no.3
    • /
    • pp.30-36
    • /
    • 2000
  • In this paper, an ultrasonic testing method for inspection of high attenuation welding area using the minimum Polarity threshold algorithm which combines the minimum amplitude selection algorithm and polarity threshold algorithm is suggested to increase the signal to noise ratio of the flow signal. In order to confirm the usefulness of the suggested algorithm, experiments were performed using four probes and standard specimens following the ASME Xl Code. As a result, scattering signals were observed from the SE(safe end) and CCSS (centrifugal casting stainless steel) materials due to the microstructural characteristical, and the detectability was reduced due to the highly attenuated signal from the weldment area, but it was conformed that using the suggested algorithm, the signal to noise ratio increased about 2.6.

  • PDF

In the Urticating Spicule and the Gland Cell of the Larva in Euproctis flava BREMER(Lepidoptera) (독나방 (Euproctis flava BREMER) 유충의 발생소침과 독선세포에 관하여)

  • 김창환
    • The Korean Journal of Zoology
    • /
    • v.3 no.2
    • /
    • pp.1-4
    • /
    • 1960
  • Urticating spicules and poison -secreting cells of the last instar larva in Euproctis flava BREMER was studied histologically. Three kinds of cells in the epidermis of tubercles on the lst to 8th abodominal segments are classified according to the arrangement of their nuclei : smallepidermal cells, large gland cells, and elongated trichogen cells. As a result of Mallory's triple straining , the epicuticle , the papila-like structure apart form the tubules inside which are gathered at the base and connected with a middle layer cell through a canal in the cuticle, and the peripheral of the urticating spcicule are yellow. However, the inside of the spicule , the tubules within the papilla-like structure, the canal in the cuticle , nuclei in the pidermal cells and the thin exocuticle are red although the thich endocuticle is blue. Particularly , the large nuclei in the middle layer cells are bright red, the cytoplasms of which are little and stained red, too, and the inside of the spicules apt to be stained red when they are broken. The contents therefore seem to be continuous between the spicules and the large cells. Presumably , the large cell at the middle layer is not te tormogen cell which Tsutsumi (1958) has described , but the gland cell which secretes the poison-substance into spicules as Pawlowsky and Stein 91927) and Tonkes (1933) pointed out. Whether the pisonous substance is secreted from the gland cell into the cytoplasmic processes of the trichogen cells which stick large middle layer cells during the formation of the new spicule as Tsutsumi (1958) has observed, or the gland cell makes a new connection with the spicule after the spicule is formed is not clear.

  • PDF

Distribution of Length Variation of the mtDNA 9-bp Motif in the Intergenic COII/tRNAX$^{Lys}$ Region in East Asian Populations

  • Han Jun Jin;Jeon Won Choi;Dong Jik Shin;Jung Min Kim;Wook Kim
    • Animal cells and systems
    • /
    • v.3 no.4
    • /
    • pp.393-397
    • /
    • 1999
  • Length variations in human mitochondrial DNA (mtDNA) offer useful markers in the study of female aspects of human population history. One such length variation is a 9-bp deletion in the small noncoding segment located between the COII and Iysine tRNA genes (COII/tRNA/$^{Lys}$ intergenic region) which usually contain two tandemly arranged copies of a 9-bp sequence (ccccctcta) in human mtDNA. The mtDNA 9-bp deletion and polymorphic variants of expanded 9-bp repeat motif in the intergenic COII/tRNA$^{Lys}$ region have been found at varying frequencies among different human ethnic groups. We have examined the length variation of the mtDNA COII/tRNA$^{Lys}$ intergenic region from a total of 813 individuals in east Asian populations. The occurrence of the 9-bp deletion was found to be relatively homogeneous in northeast Asian populations (Chinese, 14.2%; Japanese, 14.3%: Koreans, 15.5%), with the exception of Mongolians (5.1%). In contrast, Indonesians (25.0%) and Vietnamese (23.2%) of the southeast Asian populations appeared to have relatively high frequencies of the 9-bp deletion. We identified the existence of a new expanded 9-bp repeat motif which likely resulted from a slipped mispairing insertion of six more cytosines in the intergenic COII$^{Lys}$ region. It was present at low frequencies in the Korean (2/349) and Japanese populations (2/147). Based on the results of this study, the Korean population may reflect a close genetic affinity with the Japanese and Chinese populations than the others surveyed east Asian populations.

  • PDF

A Study on the Fluid Interception Valve According to Non Rubbing Top and Bottom operation Shaft (무마찰 상하작동 축에 의한 유체차단 밸브에 관한 연구)

  • Cho, Myung-Hyun
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.42 no.4
    • /
    • pp.27-32
    • /
    • 2005
  • Liquid valve is divided into cylinder and liquid part or composed of a single body structure. It becomes a connected structure to cylinder head after inserting stainless(STS) shaft to Teflon packing. In injecting and intercepting fluid, working efficiency becomes low because of the top and bottom round trip operation the friction between Teflon packing and STS shaft fluid leakage, decline of working environment, and each part replacement. And so target value is unattainable in productivity liquid valve design, quality, and structure change are studied. In this paper, designed to solve the existing problems basically, to prevent friction of Piston by developing diaphragm linked with piston, to satisfy long life, and to provide the prevention of leakage. The objective of the study is also to prevent remains fluid at nozzle tip after dispensing fluid, and bell close with the suction function in piston retreating.

The Modeling of the Optimal Data Format for JPEG2000 CODEC (JPEG2000 코덱을 위한 최적의 데이터 형식 모델링)

  • Kang, Chang-Soo;Seo, Choon-Weon
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.42 no.4
    • /
    • pp.7-14
    • /
    • 2005
  • Recently, images/videos have been preferred as the communication media because of their information-implication and easy recognizability. But the amount of their data is so large that it has been the major research area to compress their data. This paper is related to optimization in the image data format which can make a great effect in performance of data compression and is based on the wavelet transform and JPEG2000. This paper established a criterion to decide the data format to he used in wavelet transform which is on the bases of the data errors in frequency transform and quantization. This criterion has been used to extract the optimal data format experimentally. The result were (1, 9) of 10-bit fixed-point format for filter coefficients and (9, 7) of 16-bit fixed-point data format for wavelet coefficients and their optimality was confirmed.

Active Noise Control in PCB Industry (PCB산업현장의 능동소음제어)

  • Park, Jin-Hong;Nam, Myung-Woo
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.42 no.4
    • /
    • pp.41-46
    • /
    • 2005
  • Acoustic problems in the environment have gained attention due to the noise and vibration contact often in industry as well as life on modem society. Noise is one of safety element in industry, this proves damaging to humans from both a physical and a psychological aspect and so drop working efficiency. Various noises are happened from machines of manufacturing process in PCB industry. This paper present a new approach for subband feedback Active Noise Control (ANC) using Mel scale for headset system in PCB industry. The proposed Mel scale subband algorithm had a performance advantage over the subband algorithm in the noise attenuation and convergence time.

Study of engine oil replacement times estimate method using fuzzy and neural network algorithm (퍼지 및 신경망 알고리즘을 이용한 엔진오일 교환 시기 예측 방법에 관한 연구)

  • Nam, Sang-Yep;Hong, You-Sik;Kim, Cheon-Shik
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.42 no.4
    • /
    • pp.15-20
    • /
    • 2005
  • If we can forecast the replacement time of engine oil, we extend the life-time of our engine and increase the continued ratio. But, the replacement times of engine oil is influenced by the following elements: the distance that cars or vehicles travel, vehicles that run a short range, types of engine oil etc. that run a long distance. In this paper, We forecast engine oil replacement times by using fuzzy neural network algorithm. This algerian uses the data of distance covered, color of engine oil etc. Through a sequence of simulation, the exchange system of intelligence style engine oil decides on the replacement times of engine oil quite accurately. Therefore, We expect vehicles to become more convenient if the above algorithm is a lied to the present types of cars.

The Effect of Cryopreservation on the Mouse Embryos at Various-pronuclear Stages

  • Park, M.C.;Kim, J.Y.;Kim, S.B.;Park, Y.S.;Park, H.D.;Lee, J.H.;Oh, D.S.;Kim, Jae-myeoung
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.22 no.2
    • /
    • pp.174-180
    • /
    • 2009
  • This study was carried out to establish an appropriate condition for the efficient cryopreservation of the mouse pronuclear embryo. In vitro cryopreservation of pronuclear embryos was carried out by slow freezing or vitrification methods and development rate of 2-cell, blastocyst and hatched blastocyst was measured as well as survival rate of the thawed pronuclear embryo. After slow freezing, vitrification and thawing of mouse pronuclear embryos, the survival rate and blastocyst development rate for the vitrification group was 97.3 and 53.4%, respectively, which was significantly higher as compared to the slow freezing group with 88.6 and 23.9%, respectively (p<0.05). Blastocyst developmental rate in each experimental group was significantly higher for 21 h in the post-hCG group at 40.5-57.0% than the 24 h post-hCG group at 40.5% (p<0.05). ICM (Inner cell mass) cell numbers of blastocyst-stage embryos during the different stages of mouse pronuclear embryos, slow freezing and vitrification period in the control and vitrification groups were 22.1${\pm}$2.7 and 17.0${\pm}$3.1-22.0${\pm}$3.2, respectively; hence, the slow freezing group (10.2${\pm}$2.0) had significantly higher cell numbers than those of the other two groups (p<0.05). Trophoblast (TE) cell number in the control group, 65.8${\pm}$12.6, was significantly higher than in the slow freezing group, 41.6${\pm}$11.1 (p<0.05). The total cell numbers in the control group and 21 h post hCG group were 87.9${\pm}$13.6 and 81.8${\pm}$14.1, respectively, and were significantly higher than for the slow freezing group (51.8${\pm}$12.6; p<0.05).