• Journal of the Korean GEO-environmental Society
• /
• v.4 no.2
• /
• pp.15-25
• /
• 2003

Time Domain Refletometry, or TDR, is a remote sensing electrical measurement technique that has been used for many years to determine the spatial location and nature of various objects, especially in the United States of America and Australia at mining industry. Since early on 1990, the TDR techniques have been applied to the geotechnical engineering such as : deformation measurement of rock slope and landslide, monitoring of ground water content and ground water level change, investigation of ground contamination and its movement. The first application of this technique, in 1996, to the domestic area is to determine the possibility of ground settlement caused by subsidence from abandoned underground mines at the Tongri and Gosari in Gangwon-d. In this paper, through the results of analysed deformation data between conventional measurements and the TDR, it was concluded that the TDR technique is a useful instrumentation method for the prediction of ground deformation.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.5-6
• /
• 2015

The applicability of TDR technique that can detect cable fault type and position was confirmed by the tests.

• Geotechnical Engineering
• /
• v.28 no.1
• /
• pp.39-44
• /
• 2011

TDR 함수량계는 전자기파를 이용하여 흙의 밀도와 함수비를 비파괴적으로 신속하게 평가하는 유망한 기술이다. TDR 시험법은 10~20cm 길이의 2~3개의 탐침을 지중에 관입시킨 후 전자기파의 이동시간을 측정하여 유전상수($K_a$)를 산정한다. 제안식을 이용하여 유전상수로부터 체적함수비(${\theta}$)의 산정이 가능하므로, 이 시험법은 흙의 함수비를 측정할 수 있는 비파괴시험 장치로 개발되어 활용되고 있다. 또한, 흙의 종류에 따른 보정상수가 파악되어 있는 경우에는 현장 밀도와 현장 함수비를 동시에 평가할 수 있으므로, TDR 함수량계를 이용하여 성토지만비나 노상토에 대한 신속하고 간편한 다짐관리가 기능하다.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.567-578
• /
• 2004

GIS technique enhanced a space data manipulation ability and we are offering a geographic information service through various analysis. The quantity used of the water was increased in such situation according to a population increase and a city concentration phenomenon. But, to secure clear water are difficult, owing to the water shortage phenomenon, seepage and the quality of water change for worse. We decide the seepage and the system to retrieve the seepage location using GIS in order to reduce vast loss from the seepage. In this paper we proposed Leakage Sensing System using TDR technology in GIS, constructed a GIS database and pilot system to prove the validity, and simulated it using TDR in GIS.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.835-838
• /
• 2003

인구증가와 발전으로 도시 집중화 현상에 따라 수도의 수요증가가 가속화되는 상태이다. 특히 물 부국현상 및 수질악화로 인한 수원확보도 어려워지고 있는 실정이다. 누수로 인한 막대한 손실을 줄이고자 컴퓨터와 인터넷을 이용하여 누수가 발생할 경우, 누수 여부를 판단하고 중앙모니터링 센터에서 관리할 수 있는 시스템이 필요하다. 따라서 누수를 탐지할 수 있는 구체적인 알고리즘이 필요하고, 전체 감지 시스템을 어떻게 구성할 것인지에 대한 설계가 필요하다. 이것을 가능하게 하는 핵심요인 중에 하나는 TDR 기술을 사용한 누수감지 시스템이다. 본 논문에서는 TDR기술을 이용하여 누수 감지시스템을 제안하고 유효성을 입증하기 위해 파이로트 시스템을 구축하여 시뮬레이션 하였다.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.215-223
• /
• 1999

Recently, measurement of soil moisture contents using TDR (time domain reflectometry) has been proven to be viable technique. The first empirical model proposed by Topp et al. (1980) has been widely used to determine moisture contents of soils from the TDR-measured dielectric constants. However, applicability of the model was limited to medium-textured soils. In this study, we investigate the applicability of the model to sandy-gravelly soils. Calibration experiments consisted of measurement on travel time of electromagnetic waveform along the parallel TDR rods inserted into samples and gravimetric determination of soil moisture contents. The experiments are performed for two sets of samples different in the length and each set consisted of seven different particle size distributions with various gavel contents. The calibration results show that the Topp equation overestimated the measured moisture content for a given dielectric constant by 3 to 8%. We therefore propose new empirical relationships valid for sandy-gravelly soils.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.347-352
• /
• 2015

Time domain reflectometry (TDR) is widely used for wire failure detection. It transmits a pulse that is reflected at the boundaries of different characteristic impedances. By analyzing the reflected signal, TDR makes it possible to locate the failure. In this study, TDR was used to detect the water leakage at a pipe joint. A wire attached to the pipe surface was soaked by water when a leak occurred, which affected the characteristic impedance of the wet part, resulting in a change in the reflected signal. To infer the leakage from the TDR signal, we first developed a finite difference time domain-based forward model that provided the output of the TDR signal given the configuration of the transmission line. Then, by solving the inverse problem, the locations of the leaks were found.

• Tunnel and Underground Space
• /
• v.5 no.1
• /
• pp.70-76
• /
• 1995

Two types of deformations can occur on the cable during the monitoring of the rock displacement by the time domain reflectometry. One is the impedance model for tensile deformation, and the other is the capacitance model for the shear deformation. The former gives a response signal with a gradual change in the amplitude of the reflected voltage, meanwhile the latter produces a signal with a blunted spike. The resolution of the TDR can be improved to 0.125% using calibration crimps on the cable of 60 meters long. It is recommended that the diameter of the cable should be 18 mm at least in order to induce a better reflected pulse without any open-circuit. The actual TDR technique cannot characterize the type and the magnitude of rock displacement quantitatively. Systematic investigation of the TDR parameters, such as the exact of cable diameter, cable length, number of crimps, combination of shearing and extension, and environment of the TDR equipment, will be able to improve the resolution to 0.01 mm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.329-336
• /
• 2013

The infrastructure of flexible pavement is composed of aggregate subbase, anti-frost layer, and subgrade. In particular, the subgrade performance is affected by climates such as frost action and precipitation. The method of TDR(Time Domain Reflectometry) sensors to measure moisture contents in subgrade layer has been used in the research. Due to the TDR method using dielectric permitivity of soil and water, the sensors can be affected by the low subgrade temperatures. The air temperatures frequently drops below $-20^{\circ}C$ in the winter in Korea. As a result, it is necessary to estimate the accuracy of the TDR moisture sensors in the range of below zero temperatures. In this study, the subgrade temperatures of lower than $-2^{\circ}C$ were extended to evaluate temperature sensitivity of the TDR moisture sensors. The test results revealed that the moisture contents around the sensors were reduced while those of the upper part of specimen showed a tendency to increase as the specimen surface temperature drops below zero under the volumetric moisture contents(VMC) of 20% and 30%. However, the impact of temperature on the function of the sensor at lower water contents was found to be negligible if any.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.139-145
• /
• 2011

The practice of asphalt pavement recycling has grown rapidly over the decade, one of which is the cold in-place recycling with the foamed asphalt (CIR-foam) or the emulsified asphalt (CIR-emulsion). Particularly, in Iowa, the CIR has been widely used in rehabilitating the rural highways because it significantly increases the service life of the existing pavement. The CIR layer is typically overlaid by the hot mix asphalt (HMA) to protect it from water ingress and traffic load and obtain the required pavement structure and texture. Most public agencies have different curing requirements based on the number of curing days or the maximum moisture contents for the CIR before placing the overlay. The main objective of this study is to develop a moisture loss index that the public agency can use to monitor the moisture content of CIR layers in preparation for a timely placement of the wearing surface. First, the moisture contents were measured in the field using a portable time domain reflectometry (TDR) device. Second, the weather information in terms of rain fall, air temperature, humidity and wind speed was collected from the same location. Finally, a moisture loss index was developed as a function of initial moisture content, air temperature, humidity and wind speed. The developed moisture loss index based on the field measurements would help the public agency to determine an optimum timing of an overlay placement without continually measuring moisture conditions in the field.