• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.47-48
• /
• 1994

• 한국재료학회지
• /
• 제5권7호
• /
• pp.775-780
• /
• 1995

MOCVD(Metal-Organic Chemical Vapor Dposition) TiN 박막을 다양한 온도와 압력에서 tetrakis-dimethyl-amino-titanium(TDMAT (Ti[N($CH_3$)$_2$]$_4$))의 자체 열분해와 NH$_3$와의 반응을 사용하여 형성하였다. 비저항은 박막내의 불순물 함량에 의존하였는데 특히 XPS curve fitting 결과 주요 불순물인 탄소와 산소 같은 불순물들이 박막내에서 다양한 침입형화합물을 만들어 박막의 물리적, 전기적 특성에 영향을 준다는 것을 알았다. Metal-organic source만을 사용하여 TiN을 형성할 경우 지름이 0.5$\mu\textrm{m}$이고 aspect ratio가 3:1인 구멍에서 step coverage가 매우 우수하였으나 NH$_3$를 흘림에 따라 step coverage가 감소하는 것이 SEM으로 확인되었는데 이는 각각의 활성화에너지와 관련된 것으로 보인다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 춘계학술발표회
• /
• pp.21-21
• /
• 1997

• 반도체디스플레이기술학회지
• /
• 제23권3호
• /
• pp.14-20
• /
• 2024

In this study, TiN thin films, used as electrode thin films, were deposited through the Thermal Atomic Layer Deposition method using TDMAT (Tetrakis(dimethylamido)titanium) as the precursor and NH3 as the reactant. After deposition at various temperatures, the thickness, crystal structure, surface roughness, impurity content, and resistivity of the films were compared. The results showed that the optimal process temperature was 200℃, forming TiO2 anatase and TiN(200) crystal structures. The surface roughness was the lowest, with Ra=0.393nm and Rq=0.502nm, and the impurity content was 27.5% O and 6.35% C, with the resistivity also recording its minimum value. Particularly, at a long pulsed time of 11 seconds, the impurity inclusion due to self-decomposition reactions was dominant, showing excellent properties at lower temperature.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.279-286
• /
• 2008

Numerical analysis is done to investigate which would be the most influencing process parameter in determining the uniformity of deposition thickness in TiN ICP-CVD(inductively coupled plasma chemical vapor deposition). Two configurations of ICP antenna are modeled; side and top planar. Side and top gas inlets are considered with each ICP antenna geometries. Precursor for TiN deposition was TDMAT(Tetrakis Diethyl Methyl Amido Titanium). Two step volume dissociation of TDMAT is used and absorption, desorption and deposition surface reactions are included. Most influencing factors are H and N concentration dissociated by electron impact collisions in plasma volume which depends on the relative positions of gas inlet and ICP antenna generated hot plasma region. Low surface recombination of N shows hollow type concentration, but H gives a bell type distribution. Film thickness at substrate edges is sensitive to gas flow rate and at high pressures getting more dependent on flow characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제36회 동계학술대회 초록집
• /
• pp.210.2-210.2
• /
• 2009

• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.449-455
• /
• 2010

To enhance the efficiency of dye sensitized solar cells, we proposed crystalline anatase-$TiO_{2}$ by using a low temperature process ($150^{\circ}C{\sim}250^{\circ}C$). We successfully fabricated 30 nm-$TiO_{2}$ at a fixed atomic layer deposition condition of 1.0 sec of TDMAT pulse, 20 sec of TDMAT purge, 0.5 sec of H$_{2}$O pulse, and 20 sec of H$_{2}$O purge. In order to examine the microstructure, phase, and band-gap of the TiO$_{2}$ respectively, we employed a Nano-Spec, transmission electron microscope, high resolution XRD, Auger electron spectroscopy, scanning probe microscope, and UV-VIS-NIR. We were able to fabricate a crystalline anatase-phase of 30 nm-TiO$_{2}$ successfully at temperatures above $180^{\circ}C$. Our results showed that our proposed low temperature ALD process (below $200^{\circ}C$) might be applicable to glass and flexible polymer substrates.

• 한국진공학회지
• /
• 제4권S1호
• /
• pp.21-27
• /
• 1995

AI planarization 공정을 위한 barrier로서 CVD 및 PVD 방법에 의해 증착된 TiN 박막의 특성에 대하여 연구하였다. CVD TiN은 TDMAT source를 사용한 MOCVD방법으로 증착하였으며, PVD TiN은 1:1 aspect ratio(A/R)를 갖는 collimator를 사용한 reactive wputtering법으로 증착하였다. AES, SEM을 이용하여 CVD TiN과 PVD TiN의 조성을 분석하고 barrier 특성을 평가하였다. CVD TiN, PVD TiN 모두 400$\AA$의 두께와 RTA 처리에 의해서 AI planarization에 대한 양호한 barrier 특성을 확보할 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.32-37
• /
• 2019

Titanium dioxide ($TiO_2$) is a promising dielectric material in the semiconductor industry for its high dielectric constant. However, for utilization on Si substrate, $TiO_2$ film meets with a difficulty due to the large leakage currents caused by its small conduction band energy offset from Si substrate. In this study, we propose an in-situ plasma oxidation process in plasma-enhanced atomic layer deposition (PE-ALD) system to form an oxide barrier layer which can reduce the leakage currents from Si substrate to $TiO_2$ film. $TiO_2$ film depositions were followed by the plasma oxidation process using tetrakis(dimethylamino)titanium (TDMAT) as a Ti precursor. In our result, $SiO_2$ layer was successfully introduced by the plasma oxidation process and was used as a barrier layer between the Si substrate and $TiO_2$ film. Metal-oxide-semiconductor ($TiN/TiO_2/P-type$ Si substrate) capacitor with plasma oxidation barrier layer showed improved C-V and I-V characteristics compared to that without the plasma oxidation barrier layer.

• 대한금속재료학회지
• /
• 제49권6호
• /
• pp.498-504
• /
• 2011

We examined the microstructure and optical properties of crystallized ~30 nm-ZnO/~10 nm amorphous $TiO_2$ nano bilayered films as nano electrodes were deposited at extremely low substrate temperatures of $150-210^{\circ}C$. The bilayered films were deposited on silicon substrates with 10 cm diameters by ALD (atomic layer deposition) using DEZn (diethyl zinc(Zn(C2H5)2)) and TDMAT (tetrakis dimethyl-amid $titanium(Ti(N(CH_3)_2)_4)$ as the ZnO and $TiO_2$ precursors, respectively, and $H_2O$ as the oxidant. The microstructure, phase, and optical properties of the bilayered films were examined by FE-SEM, TEM, XRD, AES, and UV-VIS-NIR spectroscopy. FE-SEM and TEM showed that all bilayered films were deposited very uniformly and showed crystallized ZnO and amorphous $TiO_2$ layers. AES depth profiling showed that the ZnO and $TiO_2$ films had a stoichiometric composition of 1:1 and 1:2, respectively. These bilayered films have optical absorption properties in a wide range of ultraviolet wavelengths, 250-390 nm, whereas the single ZnO and $TiO_2$ films showed an absorption range of 350-380nm.