• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.95-117
• /
• 2006

In this paper, we describe the optimization of the link-level performance and the complexity of floating-point and fixed-point methods in IEEE 802.16e OFDMA/TDD mobile modem. In floating-point design, we propose the channel estimation methods for downlink traffic channel and select the optimized method using computer simulation. So we also propose efficent algorithms for time and frequency synchronization, Digital Front End and CINR estimation scheme to optimize the system performance. Furthermore, we describe fixed-point method of uplink traffic and control channels. The superiority of the proposed algorithm is validated using the performances of Detection, False Alarm, Missing Probability and Mean Acquisition Time, PER Curve, etc. For fixed-point design, we propose an efficient methodology for optimized fixed-point design from floating-point At last, we design fixed-point of traffic channel, time and frequency synchronization, DFE block in uplink and downlink. The tradeoff between performance and complexity are optimized through computer simulations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.641-647
• /
• 2008

This paper introduces a new technique that can extract natural frequencies and damping ratios from output-only vibration data. Firstly, the free vibration data is obtained from the cross correlations of the output-only response data using a singular value decomposition process. Secondly, the well-known system identification algorithm is applied to extract the natural frequencies and damping ratios from the extracted free vibration data. Comparing to ERADC technique, the accuracy of the proposed modal parameter identification algorithm has been numerically examined. Furthermore, the practicability of the proposed algorithm has been examined through the output-only acceleration data collected from the Seohae cable-stayed bridge. Using the proposed technique, total 24 modes have been identified for the deck plate motions of the bridge.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.166-175
• /
• 2024

In this paper, the Window-Masking Method and HAT (Hardware Attached Top) CPU SoM (System on Module) are used to improve the performance and reduce the weight of the MANET (Mobile Ad-hoc Network) network synchronization system using time division redundancy. We propose converting it into a RISC-V based soft-core MCU and mounting it on an FPGA, a hardware accelerator. It was also verified through experiment. In terms of performance, by applying the proposed technique, the synchronization acquisition range is from -50dBm to +10dBm to -60dBm to +10dBm, the lowest input level for synchronization is increased by 20% from -50dBm to -60dBm, and the detection delay (Latency) is 220ns. Reduced by 43% to 125ns. In terms of weight reduction, computing resources (48%), size (33%), and weight (27%) were reduced by an average of 36% by replacing with soft-core MCU.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.3
• /
• pp.103-108
• /
• 2015

This work introduces a modal testing and analysis results of the mock-up for a layered stone pagoda. The pagoda has been horizontally excited by an impact hammer. As to the measured acceleration time responses, the first five lower mode shapes and natural frequency are extracted by the TDD technique. It is observed that the time delay of a shear wave occurs through friction surfaces. Such phenomena cannot be described by using the traditional analytical models such as a continuum cantilever beam model or a discrete shear building model. However, the time delay typically affects only the phases of the pagoda system. The frequencies of the pagoda system are not affected by such time delay. It is found in the first time that the layered stone pagoda system has a set of closely placed modes in near of natural frequency. It is believed that such modes are due to the friction characteristics in friction surfaces. Based on the stick-slip friction model, it seems that the one of the closely placed mode can be a self-excited one.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.375-382
• /
• 2010

This paper presents the extraction of natural frequencies and mode shapes of a cable-stayed bridge using data acquired from GNSS. The response signals of 6 GNSS measuring points installed at the Seohae cable-stayed bridge are used for analysis of dynamic characteristics. Using normalization process and a third order Butterworth filter for the measured signals, the related pass band's signals have been isolated. Then, the acceleration data by double differentiation for these signals are obtained. Total five natural frequencies have been extracted by the fast Fourier transform and compared to the results of different studies. For the acceleration obtained from GNSS signals, the mode shapes of the bridge have been successfully extracted by TDD technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.398-405
• /
• 2005

The multiuser detection (MUD) based wireless receiver requires more accurate channel estimation than the single user detection (SUD) schemes such as Rake receiver, and hence the post processing is required for MUD to clean up the estimated channel coefficients by eliminating the noise only coefficients. The adaptive post processing method is proposed in order to provide more accurate channel responses and the power level of the background noise and interferences at the cost of the negligible processing delay compared to the conventional method based on the threshold test with the threshold value relative to the noise variance. The simulations are performed in 3GPP-TDD mode environment. The results show that the noise estimation error of the proposed method is maximum $10\%$, which is much smaller than $50\%$ maximum error of the conventional method.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.38-47
• /
• 2003

Communication between Bluetooth devices is based on TDD by a master unit. In this discipline, the transmission of slave packets can be made only when the master transmits a packet to the slave. Thus, some slots may be wasted when there is no user data in the master's or slave's queue due to the transmission of a POLL or NULL packet. Therefore a scheduling scheme which can minimize the slot waste is required in Bluetooth intra-piconet communication. However, since the master is responsible for the intra-piconet scheduling, it must be provided with an information on each slave's queue length to apply traditional scheduling schemes. which is impossible in Bluetooth. This paper presents a new Bluetooth intra-piconet scheduling scheme that is efficient and does not require the information on each slave's queue length. The scheduling is done based on the information about the existence of data in the master and slave queues which is derived by the master identifying the type of packets transmitted. The master schedules to communicate with the slaves according to the priorities determined based on this information. We Presents simulation results which indicate a significant improvement in the performance when our proposed scheme is used.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.537-542
• /
• 2017

In this paper, we propose a new scheduling scheme to reduce the complexity and overhead in TDD uplink cellular networks. In a TDD network, users can estimate the interference causing to neighboring BSs by measuring the signals transmitted from them. In the existing max SGIR scheduling scheme, each user calculates SGIR and feeds back to BS. Then, the BS selects a user having the largest SGIR value to transmit data. This scheme has a problem that as the number of BSs increases, the number of interference channels to be measured by the users increases, and thus the hardware and algorithm complexity of the user increases. We propose a max SmGIR (Signal-to-max generating interference ratio) scheduling scheme that can reduce the user complexity by predicting the SGIR value based on only the largest interference information. According to computer simulations, the proposed scheme has similar performance to the existing max SGIR scheme despite this low complexity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.450-456
• /
• 2010

In the high-speed packet service, next generation mobile communication system has emerged as a major feature. If the fire of these high-speed kit services and non-continuous transmission of data due to the symmetrical nature of daeyiteo traffic for D-CDMA system has been actively studied. Small amounts of data moving in the uplink, but the real-time video downlink transmission, such as downloading large files to move data and services to those with asymmetric traffic characteristics, a system that can efficiently handle the data requirements be. Of 3GPP TDD(Time Division Duplex) scheme based on CDMA and TDMA in a way by introducing the concept through the proper allocation of time slots that can handle asymmetric traffic efficiently, has an advantage. TD-CDMA system by considering the characteristics of the frame configuration of transmission methods, such as physical channel structure and channel coding has been investigated. In addition, the HARQ scheme TD-CDMA system performance is analyzed by comparing them.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.512-522
• /
• 2005

In this paper, an optimal determination method of the subband-frame size and mode-switching level is proposed for adaptive OFDM-TDD systems in frequency-selective time-varying channels. The optimization problem considering frequency selectivity. user's mobility, and the signaling overhead caused by the mode change information is formulated in the maximum spectral efficiency sense satisfying the target BER. Assuming that subband-frame size is given, the mode-switching level is first optimized so that the spectral efficiency can be maximized satisfying the target BER. The subband-frame size among candidates is then determined, which maximizes the spectral efficiency. Simulation results show that the proposed scheme outperforms conventional schemes, in terms of the spectral efficiency and the BER.