• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.1-6
• /
• 2020

This paper aims to integrate the previous models about mean object transfer latency in one framework and analyze the result through the computational experience. The analytical object transfer latency model assumes the multiple packet losses and the Internet of Things(IoT) environment including multi-hop wireless network, where fast re-transmission is not possible due to small window. The model also considers the initial congestion window size and the multiple packet loss in one congestion window. Performance evaluation shows that the lower and upper bounds of the mean object transfer latency are almost the same when both transfer object size and packet loss rate are small. However, as packet loss rate increases, the size of the initial congestion window and the round-trip time affect the upper and lower bounds of the mean object transfer latency.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1961-1974
• /
• 1997

WWW has accepted widely to the who wants the hypermedia-based internet services. And WWW introduces intranet environment which consists of the networks supporting TCP/IP and HTTP protocol for processing the task of company inside that. Intranet application should support not only acquiring the informations, but also producing, modifying and deleting the ones. But since previous hypermedia development methods lack modeling behavior of system and reuse, we need a new method for intranet application. In this thesis, we have proposed the OOIDM(Object Oriented Intranet application Development Method)supporting modeling behavior of system and reuse. And we have proposed the design patterns available for the intranet domain in order to reuse the design information. And we introduces a case study about OOIDM applying design patterns. Adaptation of design patterns to intranet domain gives us much benefits. Design patterns make it easier to reuse the successful design, architecture and reducing the design decisions.

• Journal of KIISE:Information Networking
• /
• v.31 no.4
• /
• pp.375-383
• /
• 2004

As wireless mobile networks have been widely adopted due to their convenience for deployment, the research for improving their performance has been actively conducted. Since their throughput is restrained by the packet corruption rate not by congestion as in wired networks, however, network simulations for performance evaluation need to select the appropriate wireless channel model representing the behavior of propagation errors for the evaluated channel. The selection of the right model should depend on various factors such as the adopted frequency band, the level of signal power, the existence of obstacles against signal propagation, the sensitivity of protocols to bit errors, and etc. This paper analyzes 10-day bit traces collected from real sensor channels exhibiting the high bit error rate to determine a suitable sensor channel model. For selection, it also evaluates the performance of two error recovery algorithms such as a link layer FEC algorithm and three TCPs (Tahoe, Reno, and Vegas) over several channel models. The comparison analysis shows that CM(Chaotic Map) model predicts 3-time less BER variance and 10-time larger PER(Packet Error Rate) than traces while these differences between the other models and traces are larger than 10-time. The simulation experiments, furthermore, prove that CM model evaluates the performance of these algorithms over sensor channels with the precision at least 10-time more accurate than any other models.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.605-614
• /
• 2002

Amount of the web traffic web server handles are explosively increasing, which requires that the performance of the web server should be improved for the various web services. Although the analysis for the HTTP traffic with the proper tuning for the web server is essential, the research relevant to the subject are insignificant. In particular, although most of applications are implemented over HTTP 1.1 protocol, the researches mostly deal with the performance evaluation of the HTTP 1.0 protocol. Consequently, the modeling approach and the performance evaluation over HTTP 1.1 protocol have not been well formed. Therefore, basing on the HTTP 1.1 protocol supporting persistent connection, we present an analytical end-to-end tandem queueing model for web server to consider the specific hardware configuration inside web server beginning at accepting the user request until completing the service. we compare various performances between HTTP 1.0 and HTTP 1.1 under the overloading condition, and then analyze the characteristics of the HTTP traffic that include file size requested to web server, the OFF time between file transfers, the frequency of requests, and the temporal locality of requests. Presented model is verified through the comparing the server throughput according to varying requests rate with the real web server. Thereafter, we analyze the performance evaluation of the web server, according to the interrelation between TCP Listen queue size, the number of HTTP threads and the size of the network buffers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1285-1294
• /
• 1999

In this paper we consider the performance of TCP video traffic over ABR with Long-Range Dependent VBR traffic. As compressed coded video traffics are increasing rapidly over Internet, lots of studies are being done for transmitting those traffics efficiently using limited network resources. We consider here the transmitting video service over ABR service in ATM networks, especially satellite networks. CBR or VBR services are suggested in transmitting the video traffic in ATM Forum TM 4.0. But ABR service connection, which is considered as appropriate service for data traffic, can be established with a small amount of bandwidth, MCR (Minimum cell rate). Furthermore ABR service can control the source's transmitting rate using feedback mechanism. Using this feature ABR service can be used in some applications which can control their quality of services corresponding to network loads. Compressed video sources with MPEG-2 are used for Long-Range Dependent VBR traffic here. We model the compressed video source to resemble the MPEG-2 transport streams. These compressed video traffic streams are consisted of three different frames, I-frame, P-frame, and B-frame. So when a network are overloaded, we can control the quality of service using this traffic features. TCP Traffics over ABR need large buffers in ATM switch to satisfy their QoS with background VBR traffics, which have high deviations in bandwidth. Furthermore satellite ATM networks with large feedback delay need large buffers corresponding RTT delay. The performance comparisons among EFCI and ER switch (ERICA+) switches in the network circumstances described above were shown in this paper. We also considered the case with ON-OFF VBR traffics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.159-164
• /
• 2005

Recently, it has demanded high-speed digital circuits as information increase. Therefore, electromagnetic characteristics of compact microwave circuit occurred importantly. And, the effect of the imperfect ground plane on the signal integrity and influence of coupling between two parallel lines for high-speed digital transmission line on the printed circuit board is investigated by FDTD simulations in 3-D electromagnetic analysis method. The results of FDTD simulation are compared with the ADS simulation in commercial software, analyzed lumped element of modeling and electromagnetic wave's radiation of slot as frequency. As a consequence, when the slot in the ground plane is under microstrip line, it has much effect on propagation of wave.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3910-3922
• /
• 2000

Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.

• The Journal of Information Systems
• /
• v.12 no.2
• /
• pp.57-72
• /
• 2003

The purpose of this paper is to propose the modeling of multiagent based SCM and implement the prototype in the Internet environment. SCM process follows the supply chain operations reference (SCOR) model which has been suggested by Supply Chain Counsil. SCOR model has been positioned to become the industry standard for describing and improving operational process in SCM. Five basic processes, plan, source, matte, deliver and return are defined in the SCOR model, through which a company establishes its supply chain competitive objectives. A supply chain is a world wide network of suppliers, factories, warehouses, distribution centers and retailers through which raw materials are acquired, transformed or manufactured and delivered to customers by autonomous or semiautonomous process. With the pressure from the higher standard of customer compliance, a frequent model change, product complexity and globalization, the combination of supply chain process with an advanced infrastructure in terms of multiagent systems have been highly required. Since SCM is fundamentally concerned with coherence among multiple decision makers, a multiagent framework based on explicit communication between constituent agents such as suppliers, manufacturers, and distributors is a natural choice. Multiagent framework is defined to perform different activities within a supply chain. Dynamic and changing functions of supply chain can be dealt with multi-agent by cooperating with other agents. In the areas of inventory management, remote diagnostics, communications with field workers, order fulfillment including tracking and monitoring, stock visibility, real-time shop floor data collection, asset tracking and warehousing, customer-centric supply chain can be applied and implemented utilizing multiagent. In this paper, for the order processing event between the buyer and seller relationship, multiagent were defined corresponding to the SCOR process. A prototype system was developed and implemented on the actual TCP/IP environment for the purchase order processing event. The implementation result assures that multiagent based SCM enhances the speed, visibility, proactiveness and responsiveness of activities in the supply chain.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.1-8
• /
• 2005

In this paper, we study a call admission control algorithm for supporting multicast service under the BcN environment where broadcasting, communication and Internet are converging to be one. It is necessary to control service requests with a certain criteria in order to guarantee QoS because the system capacity is limited. As a possible solution, we divide one multicast service into 3 classes and set up a threshold per each class to control service request. Especially, for the purpose of system benefit, we define system pay-off rate 'GAIN' with the term 'Reward' and 'Penalty' according to admit and reject service request. And we confine the range of threshold which makes GAIN to be maximized. For the performance analysis, we model the system as M/M/m/m queueing system, investigate GAIN under various conditions and show the effectiveness of the proposed algorithm.