• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.56-63
• /
• 2006

Key recovery has been the subject of a lot of discussion, of much controversy and of extensive research. Key recovery, however, might be needed at a corporate level, as a form of key management. The basic observation of the present paper is that cryptographic solutions that have been proposed so far completely ignore the communication context. IPSec is a security protocol suite that provides encryption and authentication services for IP messages at the network layer of the Internet. We propose example to provide key recovery capability by adding key recovery information to an IP datagram. It is possible to take advantage of the communication environment in order to design key recovery protocols that are better suited and more efficient.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.611-614
• /
• 2007

This paper suggests a TCP/IP-based remote data monitoring system, which combines PDA (Personal Digital Assistant) and WLAN (Wireless Local Area Network) technologies. Wireless PDA devices are used for remote monitoring of wireless communication by continuously collecting remote device data transmitted from servers such as temperature, humidity and device status, and displaying them on mobile devices. Therefore, remote data monitoring systems that integrate wireless and wired services provide data collection adaptive to administrators and efficient identification of device status.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.249-251
• /
• 2009

Mobile patrol robots are mainly used in aerospace and military engineering because they can work at dangerous environment replacing a man. This paper presents a study on the remote monitoring and control system of a mobile patrol robot platform using TCP/IP. The mobile robot consists of intel PXA270 and linux-based system. It can get environment information such as images, temperature, humidity and slope by using two cameras and various sensors. And it transmits information data to a monitoring system through the ad-hoc network which is one of wireless network solutions. At this time, a mobile robot is a server and a monitoring system is a client. Users can monitor environment information which is received from a mobile robot by an application based on PC. We have used TCP/IP protocol, socket programming, interface technique of process and devices and control algorithm to embody the mobile robot and its monitoring system. Experimental results shows that the system can be utilized as a remote patrol monitoring tool.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.123-129
• /
• 2014

This paper suggests that it provides a electricity management system for wasting electricity, from power demand growth environments. This Energy management system based on ICT(Information & Communication Technology) can control Smart Power Outlet connecting to this system with Web Browser and Android phone, anytime, anywhere. Through analysis of acquisition data from them, this proposed system can monitor and control power consumption efficiently. This system was organized mesh network of Smart Power Outlet, gateway by wireless Zigbee, and ESS(Energy Saving System) by TCP/IP beyond existing limit of communication distance and space.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2009

The proposed real-time structural health monitoring(SHM) system in past transferred and received data, central server gathered data from sensors, through coaxial cable. an immense sum of money is required to structure sensor network using coaxial cable. This paper proposes USN-based structural health monitoring(SHM). AIso, this paper designs and realizes prototypes according to proposed SHM. The value of sensing data obtained through HSDPA transfer to the BMS(Bridge Monitoring Server) passing through the TCP / IP socket by building two-way communication system, We have implemented a complete graph converting full system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.331-340
• /
• 2003

Low-cost commodity SMP(Symmetric Multiprocessor) is widely used as a node of cluster system. In this paper, we implement and evaluate the performance of SDSM system for SMP clusters. Our SDSM system provides HLRC(Home-based Lazy Release Consistency) memory consistency model. Our protocol utilize shared memory within same SMP node, so that page fetch and message passing through network can be reduced. It is implemented on 8 node of 2-way Pentium-III SMP interconnected with 100Mbps Fast Ethernet, and uses TCP/IP for transport/network layer protocol. The experiment with eight applications shows that our SMP protocol achieves maximum 33% speedup improvement and 13%-52% reduction of page fetch compared with uniprocessor protocol.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.437-440
• /
• 2003

Recently, the study on the design of NCS(Network Control System) using Ethernet is being rapidly progressed. NCS can be extensively applied in manufacturing automation, office automation, home automation, remote control and ect. A merit of NCS on based Ethernet is to make good use of advanced Internet environment and to apply a application of abundant TCP/IP upper layer to NCS. The purpose of this paper is to control a speed of DC-motor using NCS on based Ethernet. The control system is divided into a server part and a client part. A server transfers a value of reference speed of a DC-motor. A client receives a output signal of DC-motor and a reference input obtained from the server. A client computes a error of two signals and then makes a control input. The control input is transferred to a actuator In this pater, A controller uses a classical control using a general feedback. In this paper, a viewpoint is to compare performance of NCS with performance of a classical control and to analyze the cause of that.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.430-436
• /
• 2014

This paper relates to the study about the street security light management system. The purpose of the wireless remote management system is to manage street security lights efficiently. The system is composed of three components like light controller, CDMA gateway and web based remote management server. The zigbee solution is adopted to make local wireless network between street security lights. The CDMA network is used for the wireless communication between street security light controller and the remote control center. The gateway to interconnect zigbee network and CDMA was designed with low power 32 bits Cortex M3 micro-controller. For the data communication between the management server and the gateway, SMS and socket based TCP streaming is used. The management server sends SMS to the gateway to deliver light control and management requests, and the gateway replies with the light controllers report via TCP streaming. By using both SMS and TCP streaming communication, it was verified that simple cost effective management is possible for street security lights. We tried real test for 95 street security lights in real environment during two months and analyzed the practical possibility for mass supply.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.734-745
• /
• 2006

This paper presents a PC cluster-based distributed VOD server that minimizes the load of an interconnection network by adopting the VIA communication protocol and the interval cache algorithm. Video data is distributed to the disks of the distributed VOD server and each server node receives the data through the interconnection network and sends it to clients. The load of the interconnection network increases because of the large amount of video data transferred. This paper developed a distributed VOD file system, which is based on VIA, to minimize cost using interconnection network when accessing remote disks. VIA is a user-level communication protocol removing the overhead of TCP/IP. This papers also improved the performance of the interconnection network by expanding the maximum transfer size of VIA. In addition, the interval cache reduces traffic on the interconnection network by caching, in main memory, the video data transferred from disks of remote server nodes. Experiments using the distributed VOD server of this paper showed a maximum performance improvement of 21.3% compared with a distributed VOD server without VIA and the interval cache, when used with a four-node PC cluster.