• Journal of Radiation Protection and Research
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2001

An accurate and rapid analytical technique of uranium isotopes in highly contaminated soil samples was developed and validated by application to the IAEA-Reference samples. For overcoming the demerits of the TBP extraction method, sample materials were decomposited with $HNO_3$ and HF, and uranium isotopes were purified by an anion exchange resin and a TRU Spec resin. With the extraction chromatography method, the hindrance elements were completely removed from the uranium fraction. The chemical yields with the extraction chromatography method were more 10% higher than those with the TBP extraction method. The concentrations of uranium isotopes in soil samples using the extraction chromatography method were consistent with the reference values reported by the IAEA.

• Resources Recycling
• /
• v.7 no.5
• /
• pp.46-51
• /
• 1998

A study has been on the recovery of nitric acid and valuable metals such as Fe, Cu, Sn, Pb, from spent nitric etching solutions. The effects of extractant of extractant type, concentrations, phase raios and selectivity from Fe, Cu, Sn, Pb on nitric acid extraction were studied. The results showed that TBP as an extractant for recovering of nitric acid was more effective than Alamine336, and the optimal concentration of TBP was found to be 60~70% of organic phase. Also, the nitric acid were only extracted by TBP from the spent etching solutions and the heavy metals such as Fe, Cu, Sn, Pb were not extracted above 0.1N nitric acid in spent etching solutions, From the analysis of McCabe-Thiele diagram, the extraction of 95% nitric acid is attained at a ratio of O/A=3 with five stages by 60% TBP and the stripping of 98% nitric acid from 80 g/l nitric acid in organic phase is attained at a ratio of O/A=1 with four stages by distilled water.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.133-143
• /
• 2007

This study was performed to evaluate the co- and sequential separation of Tc, Np and U from the simulated multi-component HLW solution by a TBP (tributyl phosphate)-TOA (tri- octyl amine)/NDD $(n-dodecane)-HNO_3$ extraction system. An optimal condition of (30% TBP-0.5% TOA)/NDD-1 M $HNO_3$ was selected by taking account of a prevention of the 3rd phase and effects of concentration of TBP, TOA and nitric acid on the co-extraction of Tc, Np and U. In that condition, the extraction yields were 81% (Tc), 85% (Np), less than 9% (Am and RE elements), about 8% (Pd), and less than 5% (other elements) so that the system developed for the co-extraction of Tc, Np and U was proved to be available. For that, however, more than 99% of Zr was found to be pre-removed. The co-extracted Tc, Np and U were sequentially separated in order of Tc(stripping agent : 5 M $HNO_3$)${\rightarrow}Np$ by reductive stripping (reductive-stripping agent : 0.1 M AHA)${\rightarrow}U$ (stripping agent : 0.01 M $HNO_3$), and then their separation factors were evaluated. At these conditions, 95% of Tc, 98% of Np and 99% of U could be recovered in each step.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.131-139
• /
• 1993

The separation of gallium and indium from the matrix elements such as zinc and other ions, especially form Fe(III) ion was studied for the determination of trace level of them in zinc ores and zinc blendes by inductively coupled plasma atomic emission spectrometry(ICP-AES). Gallium and indium were extracted from the sample solution with a solvent of tributyl phosphate(TBP). The type and concentration of acid, interferences of other ions, the ratio of aqueous phase to organic phase, TBP concentration, sripping efficiency were optimized for the effective extraction. Gallium and indium were separated from other ions in the 5N hydrochloric acid solution of the samples by the extraction with 100% TBP. In this time, Fe(III) was reduced to Fe(II) with hydroxylamine hydrochloride to prevent its coextraction prior to the main extraxtion. After stripped from organic phase by the back-extraction with 0.02N HCl, they were determined in the aqueous phase by ICP-AES. This method was known to be quantitative from the overall extraction of more than 95%.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.19-25
• /
• 2013

Solvent extraction experiments have been conducted to separate Zr(IV) and Hf(IV) from chloride solutions by using LIX63 and Cyanex301. Zr and Hf were extracted by cation exchange reaction in the pH range from 1 to 4 by the extratants. Since the extraction percentage of the two metals was similar to each other, it was difficult to separate the two metals by using LIX63 or Cyanex301. Use of a mixture of LIX63/TBP or Cyanex301/TBP resulted in antagonism in our experimental ranges. Our data showed that there is some possibility of separating the two metals by the mixture of Cyanex301 and TBP because the extraction percentage of Hf decreased more rapidly than that of Zr as HCl concentration was decreased. The mixture of LIX63 and Cyanex301 had little effect on the separation of the two metals.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.38-41
• /
• 1963

Nb is one of the trouble-some fission products in the reprocessing of nuclear fuels. In this paper, the extraction of Nb from 1, 2, 3, 4, 6 and 9N $HNO_3$ solution by mixtures of TBP and DBP in dodecane are reported. Sums of the concentration of TBP and DBP are kept to 20%. When the concentrations of DBP are lower the $2{\times}10^{-2}%$, distribution ratios are almost same, and ratios increase abruptly and the slope is about 2.5 at between $2{\times}10^{-2}$ to $4{\times}10^{-1}%$, then slope falls down to about 0.5. There is aging effect on mixture of TBP and DBP.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.90-98
• /
• 1994

For elucidation of various parameters' effects on the reactive extraction of citric acids, citric-acetic-lactic acid system with various carriers, diluents, and modifiers were investigated. Carries used were secondary amines, tertiary amines, and solvation extract. Dileunts were n-butylacetate, methoisobutylketon(MIBK), kerosine, and xylene. Modifiers were TBP and isodecanol. The effects of temperature and pH in aquous phase were studied, and equilibrium constants for the reactive extraction were obtained. The re-extraction was performed by alkali solutions such as NaOH, $Na_2CO_3$, and $K_2HPO_4$. Based on the experiment Di-isotridecylamine(secondary amine ) gave higher degree of extraction and more selective than other extractants tested for the extraction of citric acid. N-butylacetate and TBP showed heigher performance for a diluent and modifier, repetitively. The degree of extraction was getting better with decreasing the pH in the aquous phase and the temperature of extraction system. The degree of re-extraction was getting higher with decreasing basicity in the stripping phase and the system temperature, and with increasing the concentration of alkali solution.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.3-10
• /
• 2006

The solvent extraction for the separation of platinum group metals from the leach liquor of spent automotive catalysts has been studied. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) and di-n-hexyl sulfide (DHS) were used as extractants and kerosene as a diluent. The extraction behavior of platinum, palladium and rhodium has been investigated as functions of different kinds of extractants and their concentrations. In addition, the extraction behavior of the major metal impurities such as cerium, lead, iron, magnesium and aluminum has been investigated. Platinum and palladium were extracted with TBP. And platinum, palladium and rhodium were extracted with TOA. Platinum was co-extracted with palladium into the organic phase by solvent extraction using SFI-6 of DHS extractant, but only palladium was selectively extracted with SFI-6R. The selective extraction of palladium with SFI-6R was found better than that with SFI-6, but the kinetics of extraction with SFI-6R was found poor in comparison to SFI-6. The metal impurities extracted simultaneously during the extraction of platinum group metals should be removed in scrubbing and stripping processes. A suitable process has been proposed for the separation of platinum group metals from the leach liquor of spent automotive catalysts. Initially palladium was extracted with SFI-6R, followed by the separation of platinum with TBP or TOA leaving rhodium in the raffinate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.347-357
• /
• 2018

The applicability of room temperature ionic liquids (RTILs), 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([$C_nmim$] [$Tf_2N$]), was investigated for the extraction of Am(III) and Eu(III) from nitric acid using n-octyl(phenyl)-N,N-diisobutyl carbamoylmethyl phosphine oxide (CMPO) and tri-n-butylphosphate (TBP) as extractants. The distribution ratios of Am(III) and Eu(III) in CMPO-TBP/[$C_nmim$][$Tf_2N$] were measured as a function of various parameters such as the concentrations of nitric acid, CMPO, and TBP. The results were compared with those obtained in CMPO-TBP/n-dodecane (n-DD). With comparable concentrations of the extractants, the distribution ratios obtained with RTILs were much higher than those obtained with n-DD. It was observed that the extraction efficiency was less for Eu(III) than for Am(III). The extraction of Am(III) and Eu(III) decreased with increases in the feed acidity for all three RTILs. The results suggest that the extraction of Am(III) and Eu(III) by CMPO in RTILs from nitric acid proceeds through the cation-exchange mechanism. The distribution ratios of Am(III) and Eu(III) increased with increases in the concentration of CMPO for all three RTILs. A linear regression analysis of the extraction data resulted in a straight line with a slope of about 3, suggesting the involvement of 3 molecules of CMPO during the extraction process.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.273-273
• /
• 2002