DOI QR코드

DOI QR Code

Extraction Behavior of Am(III) and Eu(III) From Nitric Acid Using Room Temperature Ionic Liquid

질산용액으로부터 이온성 액체를 이용한 Am(III)과 Eu(III)의 추출 거동

  • Received : 2018.06.08
  • Accepted : 2018.07.26
  • Published : 2018.09.30

Abstract

The applicability of room temperature ionic liquids (RTILs), 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([$C_nmim$] [$Tf_2N$]), was investigated for the extraction of Am(III) and Eu(III) from nitric acid using n-octyl(phenyl)-N,N-diisobutyl carbamoylmethyl phosphine oxide (CMPO) and tri-n-butylphosphate (TBP) as extractants. The distribution ratios of Am(III) and Eu(III) in CMPO-TBP/[$C_nmim$][$Tf_2N$] were measured as a function of various parameters such as the concentrations of nitric acid, CMPO, and TBP. The results were compared with those obtained in CMPO-TBP/n-dodecane (n-DD). With comparable concentrations of the extractants, the distribution ratios obtained with RTILs were much higher than those obtained with n-DD. It was observed that the extraction efficiency was less for Eu(III) than for Am(III). The extraction of Am(III) and Eu(III) decreased with increases in the feed acidity for all three RTILs. The results suggest that the extraction of Am(III) and Eu(III) by CMPO in RTILs from nitric acid proceeds through the cation-exchange mechanism. The distribution ratios of Am(III) and Eu(III) increased with increases in the concentration of CMPO for all three RTILs. A linear regression analysis of the extraction data resulted in a straight line with a slope of about 3, suggesting the involvement of 3 molecules of CMPO during the extraction process.

이온성 액체를 이용하여 질산 용액으로부터 Am(III)과 Eu(III)의 추출 거동을 조사하고 이온성 액체의 활용가능성을 살펴보았다. 이온성 액체로는 1-alkyl-3- methylimidazolium bis(trifluoromethylsulfonyl)imide ([$C_nmim$][$Tf_2N$])을 사용하였고, n-octyl(phenyl) N,N-diisobutyl carbamoylmethyl phosphine oxide (CMPO)와 tri-n-butylphosphate (TBP)를 추출제로 사용하여, Am(III)과 Eu(III)의 추출 분배계수를 질산농도, CMPO, TBP와 같은 변수들의 함수로서 측정하였다. 이온성 액체를 사용함으로써 기존의 n-doodecane (n-DD)과 비교하여 추출 효율이 현저히 증가하였다. 질산 용액의 농도가 높을수록 Am(III)과 Eu(III)의 추출률은 감소하였으며, Eu(III)의 추출률은 Am(III)보다 전반적으로 작았다. 이온성 액체를 이용한 Am(III)과 Eu(III)의 추출 메카니즘은 n-DD와 같은 분자성 유기용매를 사용하는 경우와는 달리 양이온 교환 메카니즘에 의해 일어나는 것으로 판명되었다. 사용한 모든 이온성 액체에 대하여 Am(III)과 Eu(III)의 추출 분배계수는 CMPO의 농도가 높을수록 증가하고, CMPO 농도에 대한 추출 데이터의 직선 기울기 값은 약 3.0으로 이온성 액체를 이용한 Am(III)과 Eu(III)의 추출반응에서 3분자의 CMPO가 복합착물을 형성하는 것으로 나타났다.

Keywords

References

  1. X.Q. Sun, H.M. Luo, and S. Dai, "Ionic liquids-based extraction: A promising strategy for the advanced nuclear fuel cycle", Chem. Rev., 112(4), 2100-2128 (2012). https://doi.org/10.1021/cr200193x
  2. K.A. Venkatesan, T.G. Srinivasan, and P.R. Vasudeva Rao, "A review on the electrochemical applications of room temperature ionic liquids in nuclear fuel cycle", J. Nucl. Radiochem. Sci., 10(1), R1-R6 (2009).
  3. S.H. Ha, R.N. Menchavez, and Y.M. Koo, "Reprocessing of spent nuclear waste using ionic liquids", Korean J. Chem. Eng., 27(5), 1360-1365 (2010). https://doi.org/10.1007/s11814-010-0386-1
  4. P.R. Vasudeva Rao, K.A. Venkatesan, A. Rout, T.G. Srinivasan, and K. Nagarajan, "Potential applications of room temperature ionic liquids for fission products and actinide separation", Sep. Sci. Technol., 47(2), 204-222 (2012). https://doi.org/10.1080/01496395.2011.628733
  5. B.H. Park, "A review on the application of ionic liquids for the radioactive waste processing", J. Nucl. Fuel Cycle Waste Technol., 12(1), 45-57 (2014). https://doi.org/10.7733/jnfcwt.2014.12.1.45
  6. P. Giridhar, K.A. Venkatesan, T.G. Srinivasan, and P.R. Vasudeva Rao, "Electrochemical behavior of uranium(VI) in 1-butyl-3-methylimidazolium chloride and thermal characterization of uranium oxide deposit", Electrochim. Acta, 52(9), 3006-3012 (2007). https://doi.org/10.1016/j.electacta.2006.09.038
  7. P. Giridhar, K.A. Venkatesan, S. Subramaniam, T.G. Srinivasan, and P.R. Vasudeva Rao, "Extraction of uranium(VI) by 1.1M tri-n-butylphosphate /ionic liquid and the feasibility of recovery by direct electrodeposition from organic phase", J. Alloys Compd., 448(1-2), 104-108 (2008). https://doi.org/10.1016/j.jallcom.2007.03.115
  8. Y. Ohashi, N. Asanuma, M. Harada, Y. Wada, T. Matsubara, and Y. Ikeda, "Application of ionic liquid as a medium for treating waste contaminated with UF4", J. Nucl. Sci. Technol., 46(8), 771-775 (2009). https://doi.org/10.1080/18811248.2007.9711584
  9. P. Giridhar, K.A. Venkatesan, T.G. Srinivasan, and P.R. Vasudeva Rao, "Extraction of uranium(VI) from nitric acid medium by 1.1M tri-n-butylphosphate in ionic liquid diluent", J. Radioanal. Nucl. Chem., 265(1) 31-38 (2005). https://doi.org/10.1007/s10967-005-0785-7
  10. P. Giridhar, K.A. Venkatesan, T.G. Srinivasan, and P.R. Vasudeva Rao, "Effect of alkyl group in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids on the extraction of uranium by tri-n-butylphosphate diluted with ionic liquids", J. Nucl. Radiochem. Sci., 5(2), 21-26 (2004). https://doi.org/10.14494/jnrs2000.5.21
  11. K. Shimojo, K. Kurahashi, and H. Naganawa, "Extraction behavior of lanthanides using a digycolamide derivative TODGA in ionic liquids", Dalton Trans., 5083-5088 (2008)
  12. X. Sun, H. Luo, and S. Dai, "Solvent extraction of rare-earth ions based on functionalized ionic liquids", Talanta, 90, 132-137 (2012). https://doi.org/10.1016/j.talanta.2011.12.069
  13. J.W. Freiderich, E. Wanigasekara, X. Sun, Roberta, and A. Meisner, "Direct electrodeposition of UO2 from uranyl bis(trifluoromethanesulfonyl)imide dissolved in 1-ethyl- 3-methylimidazolium bis(trifluoromethanesulfonyl) imide room temperature ionic liquid system", Electrochim. Acta, 115, 630-638 (2014). https://doi.org/10.1016/j.electacta.2013.10.187
  14. N.V. Plechkova and K.R. Seddon, "Applications of ionic liquids in the chemical industry", Chem. Soc. Rev., 37, 123-150 (2008). https://doi.org/10.1039/B006677J
  15. J.N. Mathur, M.S. Murali, P.R. Natrajan, L.P. Badheka, and A. Banerji, "Extraction of actinides and fission products by octyl(phenyl)-N,N- diisobutylcarbamolylmethyl phosphine oxide from nitric acid media", Talanta, 39(5), 493-496 (1992). https://doi.org/10.1016/0039-9140(92)80170-I
  16. I. Billard, A. Ouadi1, and C. Gaillard, "Liquid-liquid extraction of actinides, lanthanides, and fission products by use of ionic liquids: from discovery to understanding", Anal. Bioanal. Chem., 400(6), 1555-1566 (2011). https://doi.org/10.1007/s00216-010-4478-x
  17. A. Rout, K.A. Venkatesan, and M.P. Antony, "Extraction behavior of Am(III) and Eu(III) in 1,3-diketonate based ionic liquid", J. Radioanal. Nucl. Chem., 310(1), 91-97 (2016). https://doi.org/10.1007/s10967-016-4777-6
  18. M. Nilsson and K.L. Nash, "A review of the development and operational characteristics of the TALSPEAK process", Solvent Extr. Ion Exch., 25(6), 665-701 (2007). https://doi.org/10.1080/07366290701634636