• Journal of Ocean Engineering and Technology
• /
• v.28 no.6
• /
• pp.500-507
• /
• 2014

This study aimed at conducting a flow analysis of the pressure distribution, discharge flow rate, and consequent thrust force according to the rotational speed of a three-dimensional screw propeller, and then investigating the effect of the rotational speed on the characteristics of the screw propeller by varying the relevant speed (3200, 2400, 1600, 800 rpm). In particular, the computational domain was considered by the analysis in the blades and outlet chamber, using boundary conditions. The difference between the minimum and maximum pressures was 5.5 MPa under the given conditions. The discharge flow rate at this pressure difference was on the level of 1956.67 kg/s, as a thrust force of 47083.7 T(N) was obtained. This study showed that the discharge flow rate linearly increased with the rotational speed, proportional to the RPM, while the thrust force was gradually and steadily increased with the relevant speed. In addition, it was proved that the occurrence of cavitation under the given conditions was closely related to the decrease in the durability of the screw propeller because the thrust force depends on the speed.

• Resources Recycling
• /
• v.11 no.5
• /
• pp.34-38
• /
• 2002

To minimize the size of transformer volume, the operating frequency of ferrites cores increasing. The power loss of Mn-Zn ferrites comprises hysteresis loss, eddy current loss and residual loss. In the range more then 500 KHz, the total power loss is mainly due to the residual loss. The power loss increase with the frequency 3rd power. To minimize residual loss as well as eddy current loss, the microstructure should have small grain and high density, It should be noted that as the product of resonance frequency and static permeability increase, the power loss decrease at high frequency region.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.20-23
• /
• 2001

Hypereutectic Al-25Si alloy, which is expected to be applied to the cylinder-liner-part of the engine-block of an automobile due to its excellent wear resistance, low density and low thermal expansion coefficient, has been fabricated through a spray forming process. The obtained microstructure of the hypereutectic Al-25Si alloy appeared to consist of Al matrix and equiaxed Si particles of average diameter of 5-7 mm. To characterize the deformation behavior of this alloy, a series of load relaxation and compression tests have been conducted at temperatures ranging from RT to $500^{\circ}C$. The strain rate sensitivity parameter (m) of this alloy has been found to be very low (0.1) below $400^{\circ}C$ and reached maximum value of about 0.2 at $500^{\circ}C$. During the deformation above $300^{\circ}C$ in compression, strain softening has been observed. The diagram of extrusion pressure vs. ram-speed has been constructed. The extrusion has been successfully conducted at the temperatures of $300^{\circ}C$ and above with the ratio of area reduction of 28 and 40 in this study.

• Toxicological Research
• /
• v.17
• /
• pp.263-270
• /
• 2001

The carcinogenic potential of steviol, a metabolite of/ stevioside (a compound that is used as a sweetener for food and drink), was examined in hamsters of both sexes. Groups of 55 male and 55 female hamsters were given diets containing steviol at 0, 100 and 500 mg/kg diet for 22 months in males and 18 months in females. After 6, 12 and 22 months in males and 18 months in females. hamsters from each group were sacrificed for hematological and biochemical tests. Growth food utilization and consumption, general appearance and mortality were similar in treated and control groups. The mean life span of hamsters given steviol was not significantly different from that of the controls. No treatment-related changes were observed in hematological, urinary and biochemical values at any stage of the study. There was no significantly altered development of neoplastic or non-neoplastic lesions attributable to steviol treatment in any organ or tissue. The highest level oj steviol in the diet which still causes no effects in hamsters was 500 mg/kg diet, under the experimental conditions used.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.280-284
• /
• 2005

Several biological activities of Rhododendron mucronulatum were investigated. The electron donating abilities of ethanol extracts of Rhododendron mucronulatum were more than 90% at 100 ppm, 500 ppm and 1,000 ppm. Xanthine oxidase was inhibition about 46% by the ethanol extracts of R. mucronulatum at 500 ppm 48% of tyrosinase activity relating to skin-whitening was shown at 1,000 ppm. Uniquely, the anti-microbial effects of water extract and ethanol extract were shown only on Staphylococcus aureus. The water extract 1 mg/disc showed the higher activity than ethanol extract. The growth inhibition effect of each sample on lung cancer (A549) and melanoma (B16F10) cell lines were over 70% at 1,000 ppm, while the effects on the melanoma (G361) and liver cancer (HepG2) were about 50% at the same concentration.

• Microbiology and Biotechnology Letters
• /
• v.22 no.4
• /
• pp.423-429
• /
• 1994

A bacterial strain which formed a distinct colony on agar plate containing naphthalene as a vapor phase and grew well ina liquid minimal medium was isolated and identified as Alcaligenes sp. A111. Optimum temperature and pH for the cultivation of Alcaligenes sp. A111 were 30$\cir$C and 7.0, respectively. Cell growth increased dramatically from 12 hours after inoculation and revealed a stationary phase at about 48 hours. Relative growth rate ($\mu$')increased hyperbolically depending on the conceration of naphthalene up to 500 ppm and reached to the maximum value pf 2.8/day, but $\mu$' didn't change within a range of 500~4000 ppm naphthalene. NH$_{4}$Cl or NH$_{4}$NO$_{3}$ was preferrd as a nitrogen source and a P : N ratio by weight og 6 : 1 was favorable to cell growth. Alcaligenes sp. A111 utilized the intermediates of degradation of naphthalene and showed tolerance to benzene, toluene, and octane. therefore, it is suggested that Alcaligenes sp. A111 could be effectively used for the biological treatment of wastewater containing naphthalene in the presence of some aromatic compounds.

• Research in Community and Public Health Nursing
• /
• v.31 no.2
• /
• pp.189-198
• /
• 2020

Purpose: The purpose of this study was to identify levels of health literacy and examine the effects of health literacy and self-care activities on quality of life of patients with type 2 diabetes. Methods: A cross sectional design was used. Questionnaires were administered via the Gallup to 500 Korean patients with diabetes in Seoul and Gyeonggi areas. The data were analyzed using descriptive statistics, independent t tests, one way ANOVA, and hierarchical regression. Results: Of 500 patients, 12.4% (n=62) indicated 'inadequate' health literacy, and 43.8% (n=219) reported 'marginal' or 'adequate' health literacy. Levels of health literacy significantly differed by demographic characteristics, self-care activities, and quality of life. The factors that had a significant effect on quality of life included inadequate health literacy (B=3.63, p=.042) and marginal health literacy (B=3.84, p=.002); however, no significant relationship was found for self-care activities (B=0.01, p=.827). Conclusion: The results of this study demonstrate a need for further research with large samples using Korean Health Literacy Scale for Diabetes Mellitus to establish the relationships between health literacy, diabetes self-care activities, and quality of life.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.3
• /
• pp.269-274
• /
• 2008

Plants have long been used as a food source in Korea. In this study, we investigated the combined immunomodulative effects of a water extract mixture of(pine needles, Sedum sarmentosum Bunge, hijkiaorme, buckwheat and Peril a leaves) on Balb/c mice $7{\sim}8$ weeks old. The mice were fed a chow diet ad libitum and the plant extract was orally administered every other day for four weeks at two different concentrations(50 and 500 mg/kg BW). After preparing the single-cell suspension, splenocyte proliferation was determined by the MTT(3-[4,5-di-methylthiazol-2-y]-2,5-diphenyl terazolium bromide) assay. After 48hrs of incubation with the mitogens(ConA or LPS) splenocyte from the mice groups administered 50 and 500 mg/kg BW of the plant extract showed a significant increased in proliferation compared to the control group. A hemolytic plague forming cell assay was used to indicate antibody production against sheep red blood cells(SRBC). The number of antibody-secreting cells T-dependent antigen. The result of this study suggest that supplementation with this plant extract may regulate immune function by increasing splenocyte proliferation and the number of plaque forming cells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.181-181
• /
• 1999

Self-assembled monolayers(SAMs) of alkanethiol have been formed on the Cu(111) surfaces in vacuum. The thermal behavior of octanethiol-based SAMs on the Cu(111) surface have been examined in ultrahigh vacuum. Using X-ray photoelectron spectroscopy (XPS), it is found that the monolayers are stable up to about 500K in vacuum. Decomposition is signaled by a decrease in the intensity of C ls peak, accompanied by an increase of the intensity of the Cu 2p peak. However, the intensity of the S 2p peak doesn't change much as a function of annealing temperature. Thermal the decomposition mass spectra show that n-alkene is the predominant species desorbing from the surface in the 500-600K temperature range. The totality of these data leads to the conclusion that the monolayers decompose through the S-C bond cleavage by hydrogen elimination reaction, resulting in the desorption of hydrocarbon moiety as n-alkene. Following this initial decomposition step, Cu2S layers are observed on the surface. For comparison, attempts were also made to examine the thermal behavior of octanethiol-based SAMs on the Cu(111) surface in air. It has been shown that the SAMs on the Cu(111) surfaces begin to desorb with the oxidation of the thiolate to sulfonate at 400K. Upon annealing to 450K, the monolayer has almost completely desorbed as indicated by the virtual disappearance of the S 2p peak.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.139-145
• /
• 2000

The mechanism of the inner resistance in a rubber crawler system has been investigated to reduce the power requirement (Kitano et al. 1994). The rolling resistance of the track roller, which is one of the major inner resistances, was measured for seven different vertical loads. The rolling resistance changed periodically and could be classified into three types. In case of the vertical load less than 500N, the rolling resistance was almost constant. For the vertical load greater than 500N, the maximum value of the rolling resistance increased. Further more in case of the vertical load greater than 1200N, negative resistance appeared. Analytical simulation of the travel resistance based on experimental results and static equilibrium equations derived from three-dimension mechanical model for the rubber crawler system. It was found that the simulation method was carried out to evaluate the travel resistance occurred by the rolling resistance of the track roller. The rolling resistance for each track roller arrangement and effects of the lug phase in the right and left rubber crawler could be estimated quantitatively.