• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.408-414
• /
• 2018

PURPOSE. This study aimed to assess the effect of non-thermal plasma on the shear bond strength of resin cements to polyetherketoneketone (PEKK) in comparison to other surface treatment methods. MATERIALS AND METHODS. Eighty PEKK discs were subjected to different surface treatments: (1) Untreated (UT); (2) Non-thermal plasma (NTP); (3) Sandblasting with $50{\mu}m$ $Al_2O_3$ particles (SB); and (4) Sandblasting + Non-thermal plasma (SB+NTP). After each surface treatment, the contact angle was measured. Surface conditioning with Visio.Link was applied in all groups after pre-treatment. RelyX Unicem resin cement was bonded onto the PEKK specimens. After fabrication of the specimens, half of each group (n=10) was initially tested, while the other half was subjected to thermocycling ($5^{\circ}C$ to $55^{\circ}C$ at 10,000 cycles). Shear bond strength (SBS) testing was performed using a universal testing machine, and failure modes were assessed using stereomicroscopy. The SBS results were analyzed statistically using one-way ANOVA followed by Tukey's post hoc test. Independent t-test was used to examine the effect of thermocycling (P<.05). RESULTS. The highest SBS values with or without thermocycling were observed with PEKK specimens that were treated with SB+NTP followed by the SB group. The lowest SBS results were observed in the UT groups. CONCLUSION. The shear bond strength between PEKK and resin cements was improved using non-thermal plasma treatment in combination with sandblasting.

• 대한한방소아과학회지
• /
• 제33권1호
• /
• pp.58-77
• /
• 2019

Objectives The purpose of this study is to investigate clinical studies on the effect of acupuncture, moxibustion, and manual therapy in pediatric growth by analyzing randomized controlled trials conducted in China. Methods We searched the clinical studies from the China Academic Journal (CAJ) in China National Knowledge Infrastructure (CNKI) by specific key words and criteria. Selected 31 clinical studies were collected and analyzed. Results Total of 31 randomized controlled trials were selected and analyzed. In most of the studies, the effectiveness of acupuncture, moxibustion, and manual therapy on growth was significantly high. The most commonly used therapies were massage. The most commonly used massage methods were pinching spine (捏脊), pressing and kneading $Z\acute{u}s\bar{a}nl\check{i}$ (按?足三里), supplementing $P\acute{i}j\bar{i}ng$ (補脾經), supplementing $Sh\grave{e}nj\bar{i}ng$ (補腎經), rubbing Abdomen (摩腹), pushing $Y\check{o}ngqu\acute{a}n$ (推涌泉), supplementing $F\grave{e}ij\bar{i}ng$ (補肺經), kneading $T\grave{a}iy\acute{a}ng$ (?太陽), and kneading $Sh\acute{e}nqu\grave{e}$ (?神闕) etc. Conclusions Based on the results of the clinical studies from China, acupuncture, moxibustion, and manual therapy can be a valuable option for pediatric growth.

• International Journal of Oral Biology
• /
• 제45권4호
• /
• pp.211-217
• /
• 2020

Molecular mimicry is the most common mechanism that breaches self-tolerance. We previously identified autoantibodies to aquaporin-5 (AQP5) in the sera of patients with Sjögren's syndrome and found that the aquaporin of Prevotella melaninogenica (PmAqp), an oral commensal, is highly homologous to human AQP5. This study aimed to test whether PmAqp can induce anti-AQP5 autoantibodies via molecular mimicry. From the amino acid sequence of PmAqp, an immunizing peptide; i.e., PmE-L, was designed, which contained both the B cell epitope "E" and T cell epitope. C57BL/6 and BALB/c mice were subcutaneously immunized with linear or cyclic forms of PmE-L emulsified in incomplete Freund's adjuvant. The concentrations of the antibodies in sera were measured using enzyme-linked immunosorbent assays. Both linear and cyclic PmE-L induced high levels of antibodies against not only the immunized peptides but also autoantibodies against AQP5E and antibodies against PmE, a Pm homolog of AQP5E. In C57BL/6 mice; however, the cyclic form of PmE-L was more efficient than the linear form in inducing autoantibodies against AQP5E that contained a cyclic epitope. The levels of anti-PmE antibodies and anti-AQP5E autoantibodies showed a strong positive correlation (r = 0.95, p < 0.0005), suggesting molecular mimicry. Collectively, the mice produced anti-AQP5E autoantibodies in response to a PmAqp-derived peptide. This model proved to be useful for studying the mechanisms of autoantibody production by molecular mimicry.

• Journal of Veterinary Science
• /
• 제24권1호
• /
• pp.15.1-15.13
• /
• 2023

Background: Inactivated vaccines are limited in preventing foot-and-mouth disease (FMD) due to safety problems. Recombinant virus-like particles (VLPs) are an excellent candidate for a novel vaccine for preventing FMD, given that VLPs have similar immunogenicity as natural viruses and are replication- and infection-incompetent. Objectives: The 3C protease and P1 polyprotein of type O FMD virus (FDMV) was expressed in yeast Hansenula polymorpha to generate self-resembling VLPs, and the potential of recombinant VLPs as an FMD vaccine was evaluated. Methods: BALB/c mice were immunized with recombinant purified VLPs using CpG oligodeoxynucleotide and aluminum hydroxide gel as an adjuvant. Cytokines and lymphocytes from serum and spleen were analyzed by enzyme-linked immunosorbent assay, enzyme-linked immunospot assay, and flow cytometry. Results: The VLPs of FMD were purified successfully from yeast protein with a diameter of approximately 25 nm. The immunization of mice showed that animals produced high levels of FMDV antibodies and a higher level of antibodies for a longer time. In addition, higher levels of interferon-γ and CD4⁺ T cells were observed in mice immunized with VLPs. Conclusions: The expression of VLPs of FMD in H. polymorpha provides a novel strategy for the generation of the FMDV vaccine.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2941-2951
• /
• 2023

The optimal minimum ECCD power is evaluated numerically for completely suppressing the 3/2 and 2/1 NTMs in the CFETR hybrid scenario. For two typical frequencies of ECCD sources launching from two upper launcher (UL) ports, f_ec = 210 GHz and 240 GHz with O1-mode, UL₁: (R_i, Z_i) = (8.47, 5.7) m and UL₂: (R_i, Z_i) = (8.2, 4.5) m, higher frequency of ECCD source launching from the UL₂ port is better than that low frequency counterpart from the UL₁ port. Using 240 GHz ECCD source launching from the UL₂ port, the minimum power required to fully suppress the two NTMs with precise ECCD alignment is 12.4 MW and 16.7 MW, respectively. When good alignment cannot be achieved, the results suggest that the misalignment should not exceed 0.02α, preferably 0.015α, corresponding to 4.4 cm and 3.3 cm. Considering engineering difficulty of high-frequency gyrotron sources, the optimal minimum ECCD power with the 210 GHz source launching from the UL₂ port is 17.9 MW and 20.6 MW for completely suppressing the 3/2 and 2/1 NTMs, respectively. In view of this, it is a good choice to select the 210 GHz ECCD source launching from the UL₂ port in the short and medium term.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• ALGAE
• /
• 제37권4호
• /
• pp.249-264
• /
• 2022

Two genera of the Rhodymeniales, Halopeltis and Leptofauchea, are here reported for the first time from the Hawaiian Islands and represent the deepest records for both genera. Molecular phylogenetic analyses of cytochrome oxidase subunit I (COI), rbcL, and large subunit ribosomal DNA (LSU) sequences for Hawaiian specimens of Leptofauchea revealed one well-supported clade of Hawaiian specimens and three additional lineages. One of these clades is described here as Leptofauchea huawelau sp. nov., and is thus far known only from mesophotic depths at Penguin Bank in the Main Hawaiian Islands. L. huawelau sp. nov. is up to 21 cm, and is the largest known species. An additional lineage identified in the LSU and rbcL analyses corresponds to the recently described L. lucida from Western Australia, and is a new record for Hawai'i. Hawaiian Halopeltis formed a well-supported clade along with H. adnata from Korea, the recently described H. tanakae from mesophotic depths in Japan, and H. willisii from North Carolina, and is here described as Halopeltis nuahilihilia sp. nov. H. nuahilihilia sp. nov. has a distinctive morphology of narrow vegetative axes that harbor constrictions along their length. The current distribution of H. nuahilihilia includes mesophotic depths around W. Maui, W. Moloka'i, and the island of Hawai'i in the Main Hawaiian Islands. Few reproductive characters were observed because of the small number of specimens available; however, both species are distinct based on phylogeny and morphology. These descriptions further emphasize the Hawaiian mesophotic zone as a location harboring many undescribed species of marine macroalgae.

• 패션비즈니스
• /
• 제27권6호
• /
• pp.124-146
• /
• 2023

This study analyzes the characteristics of each element of neo-deconstructivist fashion design and examines fashion expression methods and techniques. This study combines theoretical research and case analysis to analyze the aesthetic characteristics of neo-deconstructivist fashion and the expressive characteristics of neo-deconstructivist fashion. Through analysis of previous research, the aesthetic characteristics of neo-deconstructivism were derived as inclusiveness, playfulness, communication, and intertextuality. Inclusivity in fashion refers to including various people, body types, aesthetics, and cultural backgrounds in the scope of design, and does not limit the scope of clothing design based on individual differences such as body type or gender. Playfulness is a neo-deconstructive fashion brand that combines exaggerated makeup, vibrant colors, intriguing designs, and imaginative fashion shows to spread upbeat and playful ideas. Communication in neo-deconstructivist fashion demonstrates communication through the use of creative themes and items that reflect consumers' needs through design and the consumer's fashion presentation method. Through the mutual quotation of aspects like traits, status, T.P.O., and materials that can reveal opposing texts, intertextuality emerged as a tendency to break up binary oppositions or break away from genres. The expressive qualities of neo-deconstructivist fashion design were examined and applied to the creation of innovative fashion design through examination of the case's silhouette, color, and material. Six sets of women's clothing were designed and produced. The results of this study can be used as basic data for the development of neo-deconstructivist fashion design, and are expected to provide a wide range of inspiration for fashion design ideas.

• IMMUNE NETWORK
• /
• 제20권6호
• /
• pp.50.1-50.11
• /
• 2020

Osteoporosis is prevalent in elderly women and it may cause dental implant failure. In particular, estrogen deficiency in postmenopausal women leads to higher rates of osteoporosis prevalence. Immune cell-mediated effects involving the development of osteoporosis have been studied previously; however, the role of IL-10-producing regulatory B (B10) cells in osteoporosis is largely unclear. Here, we examined the role of B10 cells in osteoporosis. C57BL/6 mice were subjected to ovariectomy (OVX). Fifteen weeks after OVX surgery, the first molar of the right maxillary was extracted, and twenty-four weeks after OVX surgery, serous progression of osteoporosis was observed in the alveolar bone. Moreover, the proportion of CD19⁺CD5⁺CD1d^high regulatory B cells, B10, and CD4⁺CD25⁺FoxP3⁺ regulatory T cells from the spleen of OVX mice decreased during the progression of osteoporosis, compared to controls. In contrast to regulatory cells, IL-17-producing Th (Th17) cell levels were increased in OVX mice. Adoptive transfer of B10 cells to OVX mice led to a decrease in Th17 cell abundance and inhibited the development of osteoporosis in the alveolar bone from OVX mice. Thus, our results suggest that B10 cells may help suppress osteoporosis development.

• Journal of Animal Science and Technology
• /
• 제45권2호
• /
• pp.211-218
• /
• 2003

본 연구는 양돈사료내 대두박 항영양인자인 $\alpha$-galactosides와 galatomannan의 분해를 유도하는 $\alpha$-1,6-galactosidase와 $\beta$-1,4-mannanase의 사료내 첨가가 자돈 및 육성돈의 성장과 영양소 소화율에 미치는 영향을 조사하기 위하여 실시하였다. 시험 1은 개시시 체중 10.57$\pm$0.30kg의 3원 교잡종 자돈 60두를 공시하였으며, 시험설계는 옥수수－건조유청－대두박 위주의 사료에 NRC (1998)의 영양소 요구량에 따라 처리한 대조구 (CON), 대조구 사료내 복합효소제를 0.1% 첨가한 처리구로 하였다. 사양시험기간동안, 일당증체량에 있어서는 대조구와 비교하여 EC0.1 처리구가 높은 것으로 평가되었으나 유의적인 차이는 보이지 않았다. 그러나 사료효율에 있어서는 대조구와 비교하여 EC0.1 처리구가 유의적으로 높게 평가되었다 (P<0.05). 건물과 질소 소화율에 있어서 대조구와 비교하여 처리구가 향상된 것으로 조사되었다 (P<0.05). 시험 2는 개시시 체중 22.30$\pm$0.45kg의 3원 교잡종 육성돈 36두를 공시하였으며, 시험설계는 옥수수－대두박 위주의 사료에 NRC (1998)의 영양소 요구량에 따라 처리한 대조구 (AME, adequate ME diet), 대조구 사료내 복합효소제를 0.1% 첨가한 처리구 (AME+EC0.1, Adequate ME diet+ 0.1% 복합효소제), 대조구 사료에서 대사에너지 함량을 4% 낮춘 사료에 복합효소제를 0.1% 첨가한 처리구 (LME+EC0.1, Low ME diet + 0.1% 복합효소제)로 하였다. 총 30일간의 사양시험 기간동안, 일당증체량에 있어서는 AME 처리구와 비교하여 복합효소제 처리구가 유의적인 성장율이 높은 것으로 조사되었다 (P<0.05). 건물 및 질소 소화율에 있어서는 AME 처리구와 비교하여 복합효소제 첨가구가 유의적으로 높게 평가되었다 (P<0.05). 결론적으로, 자돈 및 육성돈 사료에 복합효소제의 첨가는 성장능력 및 영양소 소화율을 향상시키는 것으로 사료된다.