• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.203-209
• /
• 2006

For $P_B=50,\;{\Delta}T=10K$, Ar=5, Pr=2.36, Le=0.015, Pe=1.26, Cv=1.11, the intensity of solutal convection (solutal Grashof number $Grs=3.44x10^4$) is greater than that of thermal convection (thermal Grashof number $Grt=1.81x10^3$) by one order of magnitude, which is based on the solutally buoyancy-driven convection due to the disparity in the molecular weights of the component A($Hg_2Cl_2$) and B(He). With increasing the partial pressure of component B from 10 up to 200 Torr, the rate is decreased exponentially. The convective transport decreases with lower g level and is changed to the diffusive mode at 0.1 $g_0$. In other words, for regions in which the g level is 0.1 $g_0$ or less, the diffusion-driven convection results in a parabolic velocity profile and a recirculating cell is not likely to occur. Therefore a gravitational acceleration level of less than 0.1 $g_0$ can be adequate to ensure purely diffusive transport.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.241-247
• /
• 2005

This paper deals with the operation of a flywheel energy storage UPS. The UPS has good features such as long life-time, improved efficiency, no environmental problems, reduced size and space, and low maintenance cost compared with the conventional UPS using battery. The operating principle of the UPS is analysed in each mode including voltage compensation as well as uninterruptible power supply. Especially, the tracking characteristic of the disturbed phase of the source voltage after outage is analysed. The usefulness of the system is proved through simulations and experiments.

• Journal of Families and Better Life
• /
• v.23 no.6 s.78
• /
• pp.95-104
• /
• 2005

This study surveyed the perception and demand for the child care policy and child care service of working mothers with children under age 6. The subjects were 266 working mothers in Seoul and Kyoung-Gi Province. Data were collected with the questionnaire method and analyzed by spss-win program, including median, mode, mean, standard deviation, and t-test. The result of this study can be summarized as follows. (1) The working mothers considered both parents have the responsibility on child care and strongly demanded the national support on child care. (2) The working mothers prefered own mother and relatives to child care center as a carer of infants and toddlers, but prefered child care center for children age 3-5. (3) The working mothers demanded the increase of finantial support for family and child care center. (4) The working mothers focused on 'the security and care Program' and focused next on 'diet and health care program' in child care service. (5) The working mothers did not nearly know about the accreditation system of child care centers. This results suggest that the national and social support for child care service is an essential part in promoting children's and the working mothers' welfare.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2701-2703
• /
• 1999

A new mode of parallel operation of a modular 3-phase AC-DC Flyback converter for high power factor correction along with tight regulation is presented in this thesis. The converter offers input/output transformer isolation for safety, a unity input power factor for minimum reactive power, high efficiency and high power density for minimum weight and volume. Compared with previously developed 3-phase two-stage power converter, the advantage of the proposed converter does not require expensive high voltage and high current devices that are normally needed in popular boost type 3-phase converter. In this paper, a detailed small signal analysis of the modular 3-phase AC-DC flyback converter is provided for control purposes and also experimental results are included to confirm the validity of the analysis.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.1
• /
• pp.79-90
• /
• 1990

The purpose of this paper is to study on the effect of cutting off tension bars in reinforced concrete beams. that is, the ultimate strength, the failure mode and thl} tension stress distribution through the span. To achieve this purpose, a full-scale frame and seven small scale model beams (five rectangular and two T-section beams) were tested. The four main model specimens and two speciml}ns without cutting off tension bars 1,'{ere analyzed as plane stmss element with package program ADINA. As a result of test and analysis, the shorter' distance bet ween the reaction point and the cutting off point, the higher the ultimate strength of a bl}am will be when other physical properties are equal.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.9-14
• /
• 2005

This paper reports the hot carrier induced RF performance degradation of bulk dynamic threshold voltage MOSFET (B-DTMOS) compared with bulk MOSFET (B-MOS). In the normal and moderate mode operations, the degradations of cut-off frequency $(f_{T})$ and minimum noise figure $(F_{min})$ of B-DTMOS are less significant than those of B-MOS devices. Our experimental results show that the RF performance degradation is more significant than the U performance degradation after hot carrier stressing. Also, the degradation characteristics of RF power Performance of B-DTMOS due to hot carrier effects are measured for the first time.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.317-322
• /
• 2004

Insecticidal activity, systemic and residual effects, and effects on enzyme activities (esterase, acetylcholinesterase, glutathione S-transferase) of indoxcarb were evaluated against Plutella xylostella. The insecticide was very effective against larvae of P. xylostella. Also, indoxacarb showed only residual effect to P. xylostella when applied to vegetable leaves. It inhibited acetylcholinesterase activity, but didn't do esterase and glutathione S-transferase activities.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.57.1-57.1
• /
• 2012

We present a spectroscopic study of the globular clusters (GCs) in the giant elliptical galaxy (gE) M86 in the Virgo galaxy cluster. Using the spectra obtained from the Multi-Object Spectroscopy (MOS) mode of Faint Object Camera and Spectrograph (FOCAS) on the Subaru Telescope, we measured the radial velocities of 25 GCs, the metallicities of 16 GCs, and the ages of 8 GCs in M86. The mean velocity and the vocity dispersion of the GCs are < ${\upsilon}_p$ > = -354 ${\pm}$ 80 km/s and ${\sigma}_p$ = 292 ${\pm}$ 32km/s, respectively. The M86 GC system shows some rotation with a large uncertainty and the velocity dispersion of the blue GC system is 60 km/s larger than that of the red GC system. The mean metallicity and age of M86 GCs are <[Fe/H]> = -1.13 ${\pm}$ 0.47 and = 9.7 ${\pm}$ 4.0 Gyr, respectively. We found one GC younger than 5 Gyr. We discuss the spectroscopic results of the M86 GC system in comparison with the GC systems in other gEs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.938-941
• /
• 2001

A tool holder system has been designed and builted to measure cutting forces in diamond turning. This system design includes a 3-component piezo-electric tranducer. Initial experiments with tool holder system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. Many cutting experiments have been conducted on 6061-T6 aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool force. Cutting velocity has been determined to have negligible effects between 4 and 21㎧.(6) Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a sample model may not be sufficient to describe the forces produced in the diamond turning process.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.570-577
• /
• 2001

Three-dimensional time-dependent flow past a circular cylinder is numerically investigated using direct numerical simulation for Reynolds number 280 and 300. The higher-order finite difference scheme is employed for the spatial distributions along with the second order Adams-Bashforth and the first order backward-Euler time integration. In x-y plane, the convection term is applied by the 5th order upwind scheme and the pressure and viscosity terms are applied by the 4th order central difference. And in spanwise, Navier-Stokes equation is distributed using of Spectral Method. At Reynolds number 259 the two-dimensional wake becomes linearly unstable to a second branch of modes with wavelength about 1.0 diameters at onset (B-mode). Present results of three-dimensional effects of in wake of a circular cylinder is represented with spanwise and streamwise vorticity contours as Reynolds numbers.