• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.747-750
• /
• 2000

In this work, we investigated the dependence of optical and electrical properties of amorphous hydrogenated SiC (a-SiC:H) films on annealing temperature(T$\sub$a/). The a-SiC:H films were deposited by PECVD(plasma enhanced vapor deposition) on coming glass, p-type Si(100) wafer using SiH$_4$+CH$_4$+N$_2$gas mixture. The experimental results have shown that the optical energy band gap(E$\sub$g/) of the a-SiC thin films unchanged in the range of T$\sub$a/ from 400$^{\circ}C$ to 600$^{\circ}C$. The Raman spectrum of the thin films, annealed at high temperatures, has shown that graphitization of carbon clusters and micro-crystalline silicon occurs. The current-voltage characteristics have shown good electrical properties at the annealed films.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.94-97
• /
• 2002

CdS and $CdS:Co^{2+}$ single crystals were grown by CTR method using iodine as transport material. The grown single crystals have defect chalcopyrite structure with direct band gap. The optical energy band gap was decreased according to add of Co-impurity. We can observed the Co-impurity optical absorption peaks assigned to the $Co^{2+}$ ion sited at the $T_d$ symmetry lattice and we consider that they were attributed to the electron transitions between energy levels of ions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.607-608
• /
• 2005

In this paper, author describe the undoped and $Co^{2+}$(0.5mole%) doped $Cd_4SnSe_6$ single crystals were grown by the chemical transport reaction(CTR) method. The grown single crystals crystallize in the monoclinic structure of space group Cc and have the direct band gap structure. The energy gaps of them are 1.68 eV for $Cd_4SnSe_6$ and 1.50 eV for $Cd_4SnSe_6:Co^{2+}$ at 300K respectively.

• Korea Information Processing Society Review
• /
• v.25 no.2
• /
• pp.55-61
• /
• 2018

• Carbon letters
• /
• v.28
• /
• pp.72-80
• /
• 2018

In this study, an empirical relationship between the energy band gap of multi-walled carbon nanotubes (MWCNTs) and synthesis parameters in a chemical vapor deposition (CVD) reactor using factorial design of experiment was established. A bimetallic (Fe-Ni) catalyst supported on $CaCO_3$ was synthesized via wet impregnation technique and used for MWCNT growth. The effects of synthesis parameters such as temperature, time, acetylene flow rate, and argon carrier gas flow rate on the MWCNTs energy gap, yield, and aspect ratio were investigated. The as-prepared supported bimetallic catalyst and the MWCNTs were characterized for their morphologies, microstructures, elemental composition, thermal profiles and surface areas by high-resolution scanning electron microscope, high resolution transmission electron microscope, energy dispersive X-ray spectroscopy, thermal gravimetry analysis and Brunauer-Emmett-Teller. A regression model was developed to establish the relationship between band gap energy, MWCNTs yield and aspect ratio. The results revealed that the optimum conditions to obtain high yield and quality MWCNTs of 159.9% were: temperature ($700^{\circ}C$), time (55 min), argon flow rate ($230.37mL\;min^{-1}$) and acetylene flow rate ($150mL\;min^{-1}$) respectively. The developed regression models demonstrated that the estimated values for the three response variables; energy gap, yield and aspect ratio, were 0.246 eV, 557.64 and 0.82. The regression models showed that the energy band gap, yield, and aspect ratio of the MWCNTs were largely influenced by the synthesis parameters and can be controlled in a CVD reactor.

• Journal of Welding and Joining
• /
• v.23 no.3
• /
• pp.76-82
• /
• 2005

Recently the application of laser welding technology has been considered to shipbuilding structure. However, when this technology is applied to primer coated steel, good quality weld beads are not easily obtained. Because the primer-coated layer caused the spatter, humping bead and porosity which are main part of the welding defect attributed to the powerful vaporizing pressure of zinc. So we performed experiment with objectives of understanding spatter and porosity formation mechanism and producing sound weld beads in 6mmt primer coated steels by a $CO_2$ CW laser. The effects of welding parameters; defocused distance, welding speed, coated thickness and coated position; were investigated in the bead shape and penetration depth on bead and lap welding. Alternative idea was suggested to suspend the welding defect by giving a reasonable gap clearance for primer coated thickness. The zinc of primer has a boiling point that is lower than melting point of steel. Zinc vapor builds up at the interface between the two sheets and this tends to deteriorate the quality of the weld by ejecting weld material from lap position or leaving porosity. Significant effects of primer coated position was lap side rather than surface. Therefore introducing a small gap clearance in the lap position, the zinc vapor could escape through it and sound weld beads can be acquired. In conclusion, formation and suspension mechanism of the welding defects was suggested by controling the factors.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.153-157
• /
• 2012

This study evaluated the ability of Diffusion-Weight Image (DWI), which is one of pulse sequences used in MRI based on the T2 weighted images, to detect samples placed within phantoms according to their size. Two identically sized phantoms, which could be inserted into the breast coil bilaterally, were prepared. Five samples with different sizes were placed in the phantoms, and the T2 weighted images and DWI were obtained. The Breast 2 channel coil of SIEMENS MAGNETOM Avanto 1.5 Tesla equipment was used for the experiments. 2D T2 weighted images were obtained using the following parameters: TR/TE = 6700/74 msec, Thickness/gap = 5/1 mm, Inversion Time (TI) = 130 ms, and matrix = $224{\times}448$. The parameters of DWI were that TR/TE = 8100/90 msec, Thickness/gap = 5/1 mm, matrix = $128{\times}128$, Inversion Time = 185 ms, and b-value = 0, 100, 300, 600, 1000 s/mm. The ratio of the sample volume on DWI compared to the T2 weighted images, which show excellent ability to detect lesions on MR images, was presented as the mean b-value. The measured b-value of the samples was obtained: 0.5${\times}$0.5 cm=0.33/0.34 square ${\times}$ cm (103%), 1${\times}$1 cm=1.28/1.25 square ${\times}$ cm (102.4%), 1.5${\times}$1.5 cm = 2.28/2.67 square ${\times}$ cm (85.39%), 2${\times}$2 cm=3.56/4.08 square ${\times}$ cm (87.25%), and 2.5${\times}$2.5 cm=7.53/8.77 square ${\times}$ cm (85.86%). In conclusion, the detection ability by the size of a sample was measured to be over 85% compared to T2 weighted image, but the detection ability of DWI was relatively lower than that of T2 weighted image.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.1
• /
• pp.19-27
• /
• 2013

PURPOSE: The purpose of this study is to look into relationship between image of physiotherapist and self-esteem of physiotherapy students and desirable image of physiotherapists offer to establish basic materials. METHODS: The subjects of this study are consist of 603 students of department of Physical therapy university and college in Busan and Kim-hae. Data are collected from June 9 to July 9 in 2011 by structured questionnaires. RESULTS: The result are as follows. 1. at the physiotherapist image score, the highest score question is "Physiotherapist is specialist"(3.45) and the lowest score question is "Physiotherapist is treated samely with doctor"(2.15). 2. at the self-esteem score, the highest score question is "I think that I am at least as valuable as others"(3.37) and the lowest score question is "I can be poorly sometimes"(2.81). 3. at the static results of physiotherapist image score gap by general characteristics, there are significantly different in gender(t=2.27, p=.02), similar profession distinction(t=4.30, p=.00), major satisfaction(t=5.74, p=.00), school system (t=-2.54, p=.01). 4. at the static results of self-esteem score gap by general characteristics, there are significantly different in years (f=5.14, p=.00), gender(t=4.09, p=.00), religion(f=2.87, p=.04), similar profession distinction(t=3.97, p=.00), major satisfaction(t=4.26, p=.00). 5. at the static results of good reputation of physiotherapists increase self-esteem of physiotherapy students score question are significantly different(r=0.53, p=.00). CONCLUSION: Accordingly, these results of this study that there is a very correlation between image of physiotherapist and self-esteem of physiotherapy students. Therefore, good reputation of physiotherapists increase self-esteem of physiotherapy students.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.2
• /
• pp.650-676
• /
• 2005

It is important to identify the mid and long-term strategic technologies and evaluate technology level for the establishment of national R&D policy to upgrade technology level in Korea. This paper summarizes the result of technology level evaluation for 99 key technologies of 'National Technology Road Map', which consists of 5 visions, of Korea. The technology level, the technological gap between Korea and world-top country, the role of government to upgrade technology level, etc. were investigated by the survey (total 1,067 respondents) and the interview with experts related to key technologies. The average technology level of Korea was $65.1\%$ of that of world-top country and average technological gap was 5.8 years. The technology level of vision I 'Building an Information-Knowledge-Intelligence Society' was $71.6\%$ and highest among 5 visions. The highest technology level among 99 key technologies was $85.6\%$ for 'Digital Broadcasting Technology' and the lowest was $20\%$ for 'weather Control Technology'. The major reasons of technological gap were investigated as the lack of R&D personnel ($23.8\%$), the shortage of R&D funds ($17.8\%$), and the insufficiency of basic research ($15.4\%$), in sequence. The average technology level of USA was evaluated to highest in the world. It was presented that the technological power of China increased rapidly in the expert interview. The result of technology level evaluation would be primary information for various national S&T planning, such as S&T basic plan, S&T foresight, technology road map, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.97-98
• /
• 2007

A stoichiometric. mixture of evaporating materials for $CuGaSe_2$ single crystal thin films was prepared from horizontal electric furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuGaSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.615\;{\AA}$ and $11.025\;{\AA}$, respectively. To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuGaSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $4.87{\times}10^{17}\;cm^{-3}$ and $129\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;1.7998\;eV\;-\;(8.7489\;{\times}\;10^{-4}\;eV/K)T^2/(T\;+\;335\;K)$.