• Electronics and Telecommunications Trends
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2019

The role of Internet of Things (IoT) has been evolving from connectivity to intelligent and autonomous functions. The increase in the number of connected things and the volume of data has revealed the limit of cloud-based intelligent IoT. Meanwhile, the development of microprocessors for the IoT has enabled their intelligent decision making and reactions without the intervention of the cloud; this phase is referred to as the "autonomous IoT era." However, intelligence is not the only function of the IoT. When a cyber physical system (CPS) is running on the cloud, the real-time synchronization between the real and virtual worlds cannot be guaranteed. If a CPS is running on the IoT, both the worlds can be synchronized closely enough for a zero- time gap, i.e., achieving the goals of autonomous IoT. ETRI implements intelligence into the role of IoT and collaborates their decision making and reactions without the intervention of humans. Then, we focus on the development of a new IoT computing paradigm that enables human-like discussions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.236-244
• /
• 2011

Purpose: This study was aimed to compare the margin and internal fitness of 3-unit zirconia bridge cores fabricated by several CAD/CAM systems using replica technique. Materials and methods: Three unit-bridge models in which upper canine and upper second premolar were used as abutments and upper first premolar was missed, were fabricated. Fourty models were classified into 4 groups (Cerasys$^{(R)}$ (Group C), Dentaim$^{(R)}$ (Group D), KaVo Everest$^{(R)}$ (Group K), $Lava^{TM}$ (Group L)), and zirconia cores were fabricated by each company. Sixteen points were measured on each abutment by replica technique. Statistical analysis was accomplished with two way ANOVA and Dunnett T3 (${\alpha}$=.05). Results: In most systems, there was a larger gap on inter margin than outer margin. In the Group K, overall fitness was excellent, but the incisal gap was very large. In the Group C, marginal gap was significantly larger than Group K, but overall internal gap was uniform (P<.05). The axial gap was under $100\;{\mu}m$ in all system. The difference between internal and external gap was small on Group L and C. However, internal gap was significantly larger than external gap in Group D (P<.05). The fitness of canine was better than second premolar among abutments (P<.05). Conclusion: The marginal and internal gap was within the clinically allowed range in all of the three systems. There was a larger gap on second premolar than canine on internal and marginal surface. In most systems, there was a larger gap on occlusal surface than axial surface.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.215-220
• /
• 2001

In the T-joint welding, the complete penetration joint which is obtained by groove welding with edge preparation is generally required thor the safety and reliability of structures but this way have the some defects such as increase of working time, consumed welding electrode quantity and large welding deformation. If there is no probrem, in the strength, T-joint welding without edge preparation will be profitably understood in the economical and welding deformation side. In this paper, we performed the finite element analysis to understand the characteristics of welding residual stresses on two models, complete penetration joint have the edge preparation and incomplete penetration joint without edge preparation, respectively. Especially, we observed the relation between welding residual stress distributed on the notch of gap in the root and external force in the incomplete penetration joint without edge preparation.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.267-276
• /
• 2020

Poly(epichlorohydrin) copolyol series (PECH copolyols) were synthesized via cationic ring-opening copolymerization (ROCP) of oxirane-based monomers and effects of reaction temperature, solvent type, and initiator were studied. As a comonomer, two types of alkylene oxides were used, and polymerization conditions were conducted both with diethylene glycol (DEG) as an initiator in methylene chloride (MC) solvent and tripropylene glycol (TPG) in toluene solvent. In order to induce the active monomer (AM) mechanism in the ring-opening copolymerization reaction, the monomer was injected by an incremental monomer addition (IMA) method using a syringe pump, and the polymerization was performed at -5 ℃. PECH copolyol, a synthesized ephichorohydrin (ECH)-based copolyol, was converted to glycidyl azide-based energy-containing copolyol (GAP copolyol) by azadizing the ECH unit through a substitution reaction. It was confirmed that the synthesized azide copolyol had little effects on changes of the solvent and the initiator. Also, the molecular weight increased 500 after the azide reaction, thereby the GAP copolyol was polymerized as designed. As the content of the comonomer increased, both the T_g and viscosity tended to decrease due to the influence of the alkyl chain length. It is possible to fundamentally prevent CH₃N₃ amount produced in the azide reaction process, and it is expected that a large-scale process could be achievable.

• 프린팅코리아
• /
• s.18
• /
• pp.104-109
• /
• 2003

전 세계적으로 인쇄업체들은 전지크기의 인쇄기를 선호한다. 그러나 소량 다품종 인쇄물량의 증가에 따라 신속한 작업준비시간 및 빠른 작업전환시간 등이 요구되면서 반절용 인쇄기를 활용하는 업체들이 증가하는 추세에 있다. 이에 본지에서는 미국의 사례를 중심으로 반절인쇄기의 활용도를 살펴본다. (반절크기에 대응하는 인쇄기는 국반절, T3절, 4 x 6반절 등이 있지만 이 글에서는 반절인쇄기로 통칭하도록 한다)

• The Bulletin of The Korean Astronomical Society
• /
• v.32 no.2
• /
• pp.34.2-34.2
• /
• 2007

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.48.1-48.1
• /
• 2000

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.335-336
• /
• 2009

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.203-206
• /
• 1995

We investigate the applicability of the theory of robust stabilization with respect to additive, stable perturbations of a normalized left-coprime factorization to controller design of a flexible arm with uncertain parameters.

• 대한핵의학회:학술대회논문집
• /
• 1978.06a
• /
• pp.49.2-49.2
• /
• 1978