• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.27-35
• /
• 2016

Objective: The aims of our study were to verify the validity of the T-Scan III system (Tekscan) as an objective occlusal evaluation tool, and to assess the differences between two occlusal indexes - the peer assessment rating (PAR) index and the American Board of Orthodontics objective grading system (OGS) - by comparing the scores derived from the T-Scan III system with the two occlusal indexes and analyzing the correlations between them. Methods: The final study sample included 48 adult volunteers (39 men and 9 women, mean age $24.14{\pm}3.16years$), after excluding 29 volunteers whose occlusion could not be evaluated by the T-Scan III system due to severe skeletal or occlusal problems. PAR index and OGS scores were assessed using dental study models, and measurements of centric occlusion, protrusive movement, and lateral excursion movement were obtained via the T-Scan III system. The results were analyzed to determine correlations. Results: Occlusal analysis by the T-Scan III system was clinically reliable (p < 0.05), and the PAR index and OGS scores were significantly correlated with several measurements obtained with the T-Scan III system (p < 0.05). Conclusions: The T-Scan III system is a quantitative and reliable method for occlusal evaluation, and represents a potential substitute for occlusal indexes. Compared to the PAR index, the OGS scores of more variables were significantly correlated with the T-Scan measurements.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.59-68
• /
• 2013

The objective of this study was to analyze occlusal contact pattern of 33 young adult males with normal occlusion during lateral excursion using T-scan III system which can measure the dynamic occlusion. Occlusal contact patterns were examined and categorized in non-working side disclusion point(more functionally acceptable position) not canine-to-canine position. Disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point during lateral excursion movement was also measured and compared among the groups divided according to contact patterns. The results showed that group function was clearly more dominant than canine guidance and other occlusal contact patterns different with existing patterns were found. There were significantly difference between groups in variables of T-scan measurement. T-scan III system is effective tools to analyze and evaluate occlusal contact patterns, disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.2
• /
• pp.317-327
• /
• 2019

Objectives: This study aimed to evaluate the effects of occlusion patterns using the T-scan $III^{(R)}$ system and oral parafunctional behaviors on temporomandibular joint disorder (TMD) in female college students. Methods: A questionnaire survey assessed TMD symptoms and oral behavioral checklist (OBC) scores in 120 female college students in their early twenties. Occlusion was evaluated using the T-scan $III^{(R)}$ system. Logistic regression analysis was performed to investigate the relationship between occlusion and OBC scores based on patients' symptoms of TMD and to determine whether OBC scores were a predictor of TMD. Results: A total of 101 participants with an average age of 22 (${\pm}2.17$) years were included in the analysis. The reported symptoms of TMD were categorized as moderate (28.8%), slight (27.7%), severe (25.7%), and asymptomatic (17.8%). Occlusion was analyzed using the T-scan $III^{(R)}$ system, and the mean occlusion time was 0.42(${\pm}0.5$) seconds. The results of logistic regression analysis showed that the group that would 'clench or grind teeth' during sleep showed an odds ratio for TMD that was 8.9 times higher than that in the group without this behavior. The group that would 'hold, tighten, or tense muscles without clenching' while awake showed an odds ratio for TMD that was 21.3 times higher than that in the group without this behavior. Conclusions: We confirmed that oral parafunctional behavior affects TMD. Therefore, we would like to continue studying the diagnosis and treatment of TMD by evaluating occlusion patterns and related OBC scores.

• Journal of Korean Academy of Oral Health
• /
• v.41 no.2
• /
• pp.96-101
• /
• 2017

Objectives: The aim of this study was to investigate the relationship between cognitive function and occlusal status in elderly individuals. Methods: A total of 162 individuals aged 65 years and older, who attended the senior citizen center in Daegu city, were included after consent for participation in the study was obtained. The Korean version of the Mini-Mental State Examination (MMSE-K) was used to evaluate the level of cognitive function. Occlusal status was determined using the T-scan $III^{(R)}$ system. All collected data were analyzed by ${\chi}^2$ test, t-test, one way ANOVA, and linear regression analysis using SPSS version 23.0 for Windows. Results: There was a significant relationship between the cognitive function and the use of dentures. Individuals with posterior occlusal status had higher MMSE-K scores than those with anterior occlusal status. There was a positive correlation between the cognitive function and posterior occlusal force. Conclusions: These results suggest that occlusal status was associated with cognitive function in the elderly individuals. Active national policies to improve occlusal condition in the elderly population are needed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.199-207
• /
• 2013

Purpose: The importance of occlusal contacts of the natural dentition for durability of teeth, mandibular stabilization, and restorative dentistry is well known. The purpose of this study is to analyze the occlusal contact and guidance pattern of Koreans by evaluating the static occlusion on maximal intercuspal position and measuring dynamic occlusion during straight protrusion. Materials and methods: The occlusal contacts at maximal interincisal position and the occlusal guidance pattern during straight protrusion of 29 subjects were recorded with shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA) and compared. Occlusal registration procedures were repeated 3 times. The position was fixed to an upright position and the head position was fixed with the Frankfurt horizontal plane paralleling the horizontal plane. Fisher's Exact Test (R-General Public License, ver. 2.14.1) and Pearson's Test were used to assess the significance level of the differences between the experimental groups (${\alpha}=.05$). Results: When using shimstock foil, T-Scan III system, and polyvinylsiloxane registration material, most of the patients showed contact on anterior, premolar, and molar teeth during maximal intercuspal position. Approximately 51% of maximal intercuspal position showed anterior contact using shimstock foil. When examining the protrusive movement using shimstock foil and T-Scan III system, guidance pattern with the central incisor was the most common. Conclusion: During maximal intercuspal position, there were cases in which not all of the teeth showed occlusal contact. During mandibular protrusive movements, one or more maxillary central incisors frequently joined in straight protrusion and the posterior teeth were disoccluded. Therefore, the anterior teeth protect the posterior teeth, and vice versa. Thus, mutually protected occlusion should be applied when reconstructing occlusion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.45-56
• /
• 2022

The purpose of this study is to evaluate changes of occlusion following the placement of preformed metal crown in the permanent first molar affected by severe caries or hypomineralization. The study was conducted on 24 patients who met the criteria among the patients with occlusion in the permanent first molar reaching the occlusal plane. Restorative treatment was performed on one first molar using preformed metal crown. Before treatment, immediately after treatment, after 4 weeks, and after 8 weeks, the T-scan III was used for measuring distribution of bite force at the maximum intercuspal position, and overbite was measured with digital vernier calipers and change of dental midline was surveyed. After 8 weeks, questionnaires survey was conducted. In most cases, immediately after treatment, the distribution of bite force between the restored side and non-restored side of arch was reversed compared to before treatment, and the overbite was decreased. However, after 4 weeks, bite force of the left and right side was balanced and the distribution of bite force on the restored and non-restored permanent first molars had similar values. Also, the changed overbite and midline were returned to pre-treatment status and there was no significant temporomandibular joint and masticatory discomfort after treatment. In this study, it was confirmed that spontaneous occlusal equilibrium was achieved one month after the placement of preformed metal crown.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.431-436
• /
• 2009

In a case of class III skeletal patients with severe alveolar bone resorption, it must be a complete denture treatment plan provided stable and durable occlusion. Despite a markedly increased tooth mobility and unfavorable crown-to-root ration due to periodontal tissue breakdown, if the inflammatory process is controlled and an adequate oral hygiene performed, fixed splints will be considered. Patient's discomfort will be eliminated by achievement better clinical tooth mobility using fixed splints. So it can be a cost and time effective treatment option. In this case, it used a T-Scan System for confirmation a bilateral balanced occlusion and a occlusal force distribution reflected a patient's functional mandibular movement.

• The Korean Journal of Nuclear Medicine
• /
• v.25 no.2
• /
• pp.192-199
• /
• 1991

Peripheral arterial disease, because of it's significant and prolonged morbidity and related mortality is a major medical and surgical problem. Contrast angiogram remains the essential standard for the anatomic demonstration of disease. It does not, however, provide data suitable for quantification or any evaluation of the microcirculation. For these reasons, radionuclide studies are playing an increasingly important role by not only confirming the diagnosis and offering objective data on the physiologic significance of anatomic lesions, but by offering prognosis of healing and prediction of therapeutic results. In addition, radionuclide procedures offer means to safely and repeatedly monitor response to therapy and long term follow up. The object of this study was to evaluate the clinical availability of $^{201}T1$ perfusion scan in patients with peripheral arterial diseases. We performed $^{201}T1$ perfusion scans in patients with five Buerger' s disease (10 legs), six DM gangrenes (12 legs) and classified three perfusion pattern groups. Finally we compared treatment modalities among each groups and compaired T1-201 perfusion scan findings with angiographic findings in six patients with Buerger's disease. The results were as follows: 1) Seven legs showed increased perfusion in stress image and normal or increased perfusion in resting image (type 1). Six legs showed decreased perfusion in stress image and improved in resting image (type II). Of total 13 legs, only 1 leg needed to amputation. 2) Three legs showed decreased perfusion in stress and resting image (type III), and subsequently all cases were received surgical amputation. 3) In six Buerger's disease patients, there were disagreements in two patients (2 legs) between $^{201}T1$ scan and angiography, in which angiograms were normal but $^{201}T1$ scans showed 'type II' perfusion patterns.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.91-96
• /
• 1993

From September 1989 to June 1992,22 patients with nasopharyngeal carcinoma were treated in Asan Medical Center with an external beam of 60 Gy followed by a boost dose of 15 Gy HDR brachytherapy. There were 5 females and 17 males with median age of 44 years (range: 20-69 years). All patients were histologically confirmed and staged by physical examination, CT scan and/or MRI. By the AJCC TNM staging system, there were 2 patients with stge II (T2NO), 4 with stage III (T3NO, T1-3N1), and 16 with stage IV (T4 or N2-3). Four patients received chemotherapy with 5-FU and cisplatin prior to radiotherapy. All patients were followed up periodically by a telescopic examination and radiologic imaging study of CT scan or MRI with a median follow-up time of 13 months (range: 3-34 months). Twenty one patients showed a complete response ore month after completing therapy and one patient showed a complete response after three months. At the time of this analysis, seventeen patients remain alive without evidence of disease, but four patients developed distant metastasis and one patient died a month after treatment. The local control rate was $100{\%}$ in a median follow-up time of 13 months. The two year overall and disease free survival rates by the Kaplan-Meier method were $94{\%}$ and $67{\%}$, respectively. Serious radiation sequelae have not been observed yet. Although longer follow-up is needed, this retrospective analysis suggests that HDR brachytherap. given as a boost therapy for nasoharyngeal carcinoma may improve the local control. To reduce the incidence of distant metastasis, we need to develop a more effective systemic chemotherapy.