• Korean Management Science Review
• /
• v.16 no.1
• /
• pp.63-74
• /
• 1999

This paper presents a R&D investment model for the Information and telecommunications(l&T) technology using multiple objective linear programming(MOLP). The MOLP model involves the simultaneous maximization of three linear objective functions associated with three criteria, which are social, technological, and economic criterion. This model is different from the traditional one which only involves the maximization of economic criterion. It yields a suitable R&D investment ratio to each technology field. Its application to the National R&D Project in l&t Industry is also presented. In this application, the Analytic Hierarchy Process(AHP) is proposed to estimate the weights, which used as the coefficients in each objective function of the MOLP model. Then the problem is solved using the interactive method STEM. It is showed that with the aid of STEM, the MOLP model can be useful decision aid in formulation R&D investment plan in l&t industry. It is expected that the MOLP model works as the basis for planning R&D investment strategy in l&T industry.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.333-342
• /
• 2010

The possibility of commercializing the controlled release of chitosan carrier nano formulation was examined with mortalities and population increase rates of Aphis gossypii and Myzus persicae after treatment of 2 ${\alpha}$-cypermethrin nano type formulations of different chitosan carrier molecular weight (M.W. 3,000 and 30,000) and 2 etofenprox nano types of chitosan content (70% and 80%). After 14 days of treatment, ${\alpha}$-cypermethrin nano formulation showed over 40% mortality against A. gossypii. Therefore, it was confirmed that the insecticide release was controlled through chitosan carrier. Results of the investigation of insecticidal activity of ${\alpha}$-cypermethrin nano formulation showed there were no differences between nano types at 4 days after treatment. However, after 14 days, the population increase rate treated with chitosan M.W. 30,000 formulation was -0.037, much lower than that of M.W. 3,000 formulation with 0.231. The result exhibits that chitosan M.W. 30,000 formulation would be a suitable controlled release formulation. On the other hand, etofenprox formulations didn't show any significant insecticidal effect or persistency difference against both aphid species.

• Health Policy and Management
• /
• v.22 no.2
• /
• pp.225-248
• /
• 2012

Community Health Planning has been used in public health centers for over 10 years, but little is known about its effect and how it is utilized by public health centers. This paper examines the effect of Community Health Planning on public health centers'organizational performance through the use of the Structural Equation Modeling(SEM) technique. We conducted e-mail surveys of chiefs, people in charge of planning and other staff members in all the public health centers in the country. The instrument measured self-evaluated levels of Community Health Planning, implementation and the effect on the public health centers. The model of the SEM technique has five latent constructs: requirements of planning, plan formulation, implementation, organizational capacity and performance. The SEM technique validated the instrument used in the study and exhibited a relatively good fit. Results of this study were as follows. First, the requirements of planning have positive effects on plan formulation. Second, plan formulation has positive effects on organizational capacity but plan implementation doesn't. Third, there was no statistically significant path between plan formulation, implementation and performance. Fourth, organizational capacity has positive effects on performance. Consequently, this study revealed that Community Health Planning has a positive influence on organizational performance through organizational capacity.

• Parasites, Hosts and Diseases
• /
• v.55 no.4
• /
• pp.409-416
• /
• 2017

The high prevalence of pediculosis capitis, commonly known as head lice (Pediculus humanus capitis) infestation, has led to the preparation of a community-based pediculicidal ointment, which is made of common household items and the extract of Tinospora crispa stem. The present study aimed to evaluate the safety, efficacy, and physicochemical characteristics of the T. crispa pediculicidal ointment. The physicochemical properties of the ointment were characterized, and safety was determined using acute dermal irritation test (OECD 404), while the efficacy was assessed using an in vitro pediculicidal assay. Furthermore, the chemical compounds present in T. crispa were identified using liquid-liquid extraction followed by ultra-performance liquid chromatography quadruple time-of-flight mass spectrometric (UPLC-qTOF/MS) analysis. The community-based ointment formulation was light yellow in color, homogeneous, smooth, with distinct aromatic odor and pH of $6.92{\pm}0.09$. It has spreadability value of $15.04{\pm}0.98g{\cdot}cm/sec$ and has thixotropic behavior. It was also found to be non-irritant, with a primary irritation index value of 0.15. Moreover, it was comparable to the pediculicidal activity of the positive control $Kwell^{(R)}$, a commercially available 1% permethrin shampoo (P>0.05), and was significantly different to the activity of the negative control ointment, a mixture of palm oil and candle wax (P<0.05). These findings suggested that the community-based T. crispa pediculicidal ointment is safe and effective, having acceptable physicochemical characteristics. Its activity can be attributed to the presence of compounds moupinamide and physalin I.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.223-234
• /
• 1996

The purpose of this paper is to present an analysis method by using the finite element method which can exactly analyze load-deflection relationships, crack propagations. and stresses and strains of reinforcements, tendons, and concrete in behaviors of elastic. inelastic and ultimate ranges of reinforced and prestressed concrete slabs under monotonically increasing loads. For t h i s purpose, the m a t e r i a l and geometric nonlinearities are taken into account in this study. The total Lagrangian formulation based upon the simplified Von Karman strain expressions is used to take into account the geometric nonlinearities of the structure. The material nonlinearities are taken into account by comprising the tension, compression. and shear models of cracked concrete and models for reinforcements and tendons in the concrete : and also a so-called smeared crack model is incorporated. The reinforcements and t,endons are assumed to be in a uniaxial stress state and are modelled as smeared layers of equivalent thickness. For the verification of application and validity of the method proposed in this paper, several numerical examples are analyzcd and compared with experimental results. As a result, this method can successfully predict the nonlinear and inelastic behaviors throughout the fracture of reinforced and prestressed concrete slabs.

• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.26-34
• /
• 2000

The new numerical procedure for hydroplaning has been developed by considering the following three important factors; fluid/structure interaction, tire rolling, and practical tread pattern. The tire was analyzed by FEM with Lagrangian formulation and the fluid is analyzed by FVM with Eulerian formulation. Since the tire and the fluid are modeled separately and their coupling is automatically computed by the coupling element, the fluid/structure interaction of the complex geometry such as the tire with the tread pattern can be analyzed practically. We verified the predictability of the hydroplaning simulation in the different parameters such as the water flow, the velocity dependence of hydroplaning, and the effect of the tread pattern on hydroplaning. In order to predict the streamline in the contact patch, the procedure of the global-local analysis was developed. Since the streamline could be predicted by this technology, we could develop the new pattern in a short period based on the principle; "make the stream line smooth".

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.808-812
• /
• 2010

A great deal of attention is focused on coupled Thermo-Hydro-Mechanical (THM) behavior of multiphase porous media in diverse geo-mechanical and geo-environmental areas. This paper presents general governing equations for coupled THM processes in unsaturated porous media. Coupled partial differential equations are derived from 3 mass balances equations (solid, water, and air), energy balance equation, and force equilibrium equation. Finite element code is developed from the Galerkin formulation and time integration of these governing equations for 4 main variables (displacement $\underline{u}$, gas pressure $P_g$, liquid pressure $P_l$), and temperature T). The code is validated with theoretical solutions for linear material with simple boundary conditions.

• Structural Engineering and Mechanics
• /
• v.21 no.1
• /
• pp.19-33
• /
• 2005

An improved shear deformable thin-walled curved beam theory to overcome the drawback of currently available beam theories is newly proposed for the spatially coupled free vibration and elastic analysis. For this, the displacement field considering the shear deformation effects is presented by introducing displacement parameters defined at the centroid and shear center axes. Next the elastic strain and kinetic energies considering the shear effects due to the shear forces and the restrained warping torsion are rigorously derived. Then the equilibrium equations are consistently derived for curved beams with non-symmetric thin-walled sections. It should be noticed that this formulation can be easily reduced to the warping-free beam theory by simply putting the sectional properties associated with warping to zero for curved beams with L- or T-shaped sections. Finally in order to illustrate the validity and the accuracy of this study, finite element solutions using the isoparametric curved beam elements are presented and compared with those in available references and ABAQUS's shell elements.

• Journal of the Korean Mathematical Society
• /
• v.51 no.3
• /
• pp.545-565
• /
• 2014

In this paper we derive a priori $L^{\infty}(L^2)$ error estimates for expanded mixed finite element formulations of semilinear Sobolev equations. This formulation expands the standard mixed formulation in the sense that three variables, the scalar unknown, the gradient and the flux are explicitly treated. Based on this method we construct finite element semidiscrete approximations and fully discrete approximations of the semilinear Sobolev equations. We prove the existence of semidiscrete approximations of u, $-{\nabla}u$ and $-{\nabla}u-{\nabla}u_t$ and obtain the optimal order error estimates in the $L^{\infty}(L^2)$ norm. And also we construct the fully discrete approximations and analyze the optimal convergence of the approximations in ${\ell}^{\infty}(L^2)$ norm. Finally we also provide the computational results.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.575-580
• /
• 2000

Switching of the transmission lines(T/L) is one of the ways for suppressing the short circuit capacity. This paper presents the extended optimal power flow(OPF) to the problem of selecting the T/Ls to be open. The constraints of the short circuit currents within limits are added to the inequalities of OPF. Also, the overload on the other lines due to switching of T/Ls is avoided by the linearized inequalities. The number of the open lines can be minimized by incorporating into the objective function of OPF in order to maintain reliability. The method of an effective calculation of the extended OPF is also proposed in this paper, which makes the two parts decoupled. The one concerning the generation dispatch is solved in the first place by the conventional method. Secondly, the other concerning the line-switching is optimized by the proposed formulation.