• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.47-55
• /
• 2014

Almost of alternate computer access devices which assist people with disabilities to utilize the computer connected to computer by some cables or installed in as a S/W program. These devices have some spatial limitations to the people with disabilities, it can't guarantee the free and diverse access to the computer. For these reasons, in this paper, an Android-based mouse program for alternative computer access was developed. A people with physical disabilities who has some limitation of hand movements can use it in anywhere and anytime using only the fine motor skill of the upper limbs. The developed device recognizes the user's point touch and transforms it into the location of mouse cursor. The location information transferred to the computer via Bluetooth communication module equipped in smart devices. Also the group scanning method which can reduce the user's fatigue degree was employed and click, double click, drag & drop functions by hand's movements were equipped. The developed device will help the people with disabilities to use computer with brief touch and convenient operation without spatial limitation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.581-583
• /
• 2017

Elliptic curve cyptography is relatively a current cryptography based on point arithmetic on elliptic curves and the Elliptic Curve Discrete Logarithm Problem (ECDLP). This discrete logarithm problems enables perfect forward secrecy which helps to easily generate key and almost impossible to revert the generation which is a great feature for privacy and protection. In this paper, we provide a lightweight Elliptic Curve Diffie-Hellman (ECDH) Key exchange generator that creates a 163 bit long shared key that can be used in an Elliptic Curve Integrated Encryption Scheme (ECIES) as well as for key agreement. The algorithm uses a fast multiplication algorithm that is small in size and also implements the extended euclidean algorithm. This proposed architecture was designed using verilog HDL, synthesized with the vivado ISE 2016.3 and was implemented on the virtex-7 FPGA board.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.106-111
• /
• 2012

Purpose: The purpose of this study was to compare the effect of 3 chairside polishing methods and laboratory polishing methods on surface roughness and $C.$ $albicans$ adhesion of polyamide denture base. Materials and methods: Using contact profilometer, the surface of polyamide specimens ($25{\times}15{\times}2mm$) was studied after conventional polishing without finishing and after chiarside polishing with 2 chiarside polishing kits and chairside-pumice polishing following finishing with tungsten carbide bur. To evaluate the adhesion of $C.$ $albicans$, $C.$ $albicans$ suspension was overlayed on the test specimen. And the specimens were incubated for 2 hours. Imprint culture method was achieved and counted the colony on the agar plate. Polished polyamide were evaluated using a scanning electron microscope. The statistics were conducted using one-way ANOVA and in case of difference, Scheffe test and Tamhane's T2 test were used. Results: Surface roughness (Ra) of surfaces polished with 2 chairside polishing kits had higher than conventional polishing and pumice polishing. The highest roughness value was $0.32{\pm}0.10{\mu}m$, and the lowest was $0.02{\pm}0.00{\mu}m$. The adhesion of $C.$ $albicans$ on the specimens polished with chairside polishing group and pumice polishing group were increased than conventional polishing group ($P$<.01). Conclusion: Conventional laboratory polishing was found to produce the smoothest surface and the lowest adhesion of $C.$ $albicans$. Two groups polished with Chairside polishing kits were similar with respect to surface roughness. Surface of the specimen polished with pumice is significantly smoother than 2 chairside polishing groups, but the result of $C.$ $albicans$ adhesion is that group polished with pumice was similar with 2 chairside polishing groups ($P$>.01).

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.9-18
• /
• 2015

Software Reliability Growth Models (SRGMs) are useful for determining the software release date or additional testing efforts by using software failure data. It is not appropriate for a SRGM to apply to all software. And besides a large number of SRGMs have already been proposed to estimate software reliability measures. Therefore selection of an optimal SRGM for use in a particular case has been an important issue. The existing methods for selecting a SRGM use the entire collected failure data. However, initial failure data may not affect the future failure occurrence and, in some cases, it results in the distorted result when evaluating the future failure. In this paper, we suggest a method for selecting a SRGM based on the evaluation goodness-of-fit using partial data. Our approach uses partial data except for inordinately unstable failure data in the entire failure data. We will find a portion of data used to select a SRGM through the comparison between the entire failure data and the partial failure data excluded the initial failure data with respect to the predictive ability of future failures. To justify our approach this paper shows that the predictive ability of future failures using partial data is more accurate than using the entire failure data with the real collected failure data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6986-6992
• /
• 2014

The generalized Voronoi graph (GVG) is a topological map of a constrained environment. This is defined in terms of workspace distance measurements using only sensor-provided information, with a robot having a maximum distance from obstacles, and is the optimum for exploration and obstacle avoidance. This is the safest path for the robot, and is very significant when studying the GVG edges of highly articulated robots. In previous work, the point-GVG edge and Rod-GVG were built with point robot and rod robot using sensor-based control. An attempt was made to use a higher degree of freedom robot to build GVG edges. This paper presents GVG-based a new local roadmap for the two-link robot in the constrained two-dimensional environment. This new local roadmap is called the two-identical-link generalized Voronoi graph (L2-GVG). This is used to explore an unknown planar workspace and build a local roadmap in an unknown configuration space $R^2{\times}T^2$ for a planar two-identical-link robot. The two-identical-link GVG also can be constructed using only sensor-provided information. These results show the more complex properties of two-link-GVG, which are very different from point-GVG and rod-GVG. Furthermore, this approach draws on the experience of other highly articulated robots.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.547-553
• /
• 2016

Black carbon (BC) contained in particulate matter (PM) originating from the exhaust gases of ships' diesel engines has been receiving great attention as a cause of glacial melting and warming in the polar regions. In this study, we took samples from various locations of PM emitted from the training ship (T/S) HANBADA's main engine, in cooperation with the Korea Maritime and Ocean University. We analyzed the structure and characteristics of these samples using high-resolution transmission electron microscopy (HR-TEM) and applied our findings as fundamental research for developing PM reduction technology. We also employed our results to determine appropriate preemptive action to meet upcoming PM/BC regulations. In addition, we confirmed the emission trend of pollutants from exhaust gases under various engine operating conditions using an exhaust gas analyzer. Results obtained from the analysis of HR-TEM images showed that the structure of the PM is chain-like wispy agglomerates consisting of a number of individual spherical particles. As the sampling location was moved away from the turbo charger (T/C) towards the funnel, more condensates were observed at a low temperature and the molecular structure of the PM lost its characteristic BC structure as an amorphous structure gradually appeared. Furthermore, through the analysis of exhaust gases, we predicted a decrease in PM concentration in the exhaust stream as engine rpm increase.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.297-304
• /
• 2011

This study was to analyze the learning effectiveness of multi-media based class by comparing with traditional classroom method. The "Distribution Working Subject" course that is one of the required courses of Vocational high school was selected and its contents were digitalized on MS Powerpoint for multi-media based class. The thirty students were sampled for each experimental and control groups. The homogeneity and learning achievement of sample groups were tested for experiment. Same teacher took the classes of two groups and delivered same contents of course. Only difference between two groups was the delivery method, one is traditional classroom teaching method and the other was the multi-media based class. The learning achievements and satisfaction of sample were post-tested in order to analyze the learning effectiveness by comparing two teaching methods. The results showed that there was a significant difference between experimental and control group in learning achievement after ANCOVA controlled pre-test as covariance(F=5.08, p<.05). It means that the learning achievement of multi-media based class was higher than that of traditional classroom group. The results also showed that a significant difference in students' satisfaction between two groups (t=5.57, p<.001). This study concluded that using multi-media in class could produce more learning achievements and satisfaction of students than traditional classroom method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.51-60
• /
• 2014

In this study, ICT medical service provider's level of knowledge fire fighting safety and methods on coping with fires in the regions of Gwangju and Jeonam Province of Korea were investigated to determine the elements affecting such levels and provide basic information on the manuals for educating how to cope with the fire fighting safety in medical facilities. The data were analyzed using SPSS Win 14.0. The scores of level of knowledge fire fighting safety of ICT medical service provider's were 7.06(10 point scale), and the scores of level of recognizing how to cope with fire fighting safety were 6.61(11 point scale). level of recognizing how to cope with fire fighting safety were significantly different according to gender(t=4.12, p<.001), age(${\chi}^2$=17.24, p<.001), length of career(${\chi}^2$=22.76, p<.001), experience with fire fighting safety education(t=6.10, p<.001), level of subjective knowledge on fire fighting safety(${\chi}^2$=53.83, p<.001). In order to enhance the level of understanding of fire fighting safety and methods of coping by the ICT medical service providers it is found that: self-directed learning through avoiding the education just conveying knowledge by lecture tailored learning for individuals fire fighting education focused on experiencing actual work by developing various contents emphasizing cooperative learning deploying patients by classification systems using simulations and a study on the implementation of digital anti-fire monitoring system with multipoint communication protocol, a design and development of the smoke detection system using infra-red laser for fire detection in the wide space, video based fire detection algorithm using gaussian mixture mode developing an education manual for coping with fire fighting safety through multi learning approach at the medical facilities are required.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.426-432
• /
• 2008

We introduce a method of rendering a scene lying 3D objects which is like that artist draw on a canvas by brushing. Painting is the art area presenting something created by color and line on 2D plane. We are brushing on billboards on screen space for the 2D brushing effect according to the definition of "Painting". Brushing orientation is haven to rotate for preventing the orientation in the first scene in the case that object or camera are moving. If the brushing isn't rotated, shower-door effect is watched on the scene as undesirable result We present a brushing rotating method for keeping the orientation changing the direction of view and object rigid animation. The brushing direction is computed with Horn's 2D similarity transform by least-square solution. We watched the changing brushing to track the motion of object and view.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.37-49
• /
• 2014

This paper aims to interpret the transformation process of town plan of Gosan-up(高山), which was provincial administrative focus town in Josun dynasty, basing on morphological viewpoint. Morphological concepts, such as morphological frame, urban plan, kernel, colonization, route system, fixation line, fringe belt, plan unit & plan division, morphological period derived from the study of Conzen, M.R.G. and Caniggia, G. epidome district, break point, broken plot, urban fallow, privatization are adopted for the interpretation of urban form. Morphological period of Gosan can be divided in four ; formation of kernel & morphological structure, disintegration & redevelopment of the kernel, augmentative development of the kernel & formation of modern epidome district, outwards expanding of urbanized area, transition & reorganization of epidome district. Especially public leading projects such as construction of new regional connection road and public facilities such as myeon(township) office, agricultural cooperatives federation office, market, are main factors of morphological transformation of townplan. In the early stage, under the Japanese imperialism, construction of the new matrix route(Gosan-ro) through the kernel and followed planned routes gave way to disintegrating traditional areal plan unit and forming small block plan units in administrative facilities area. And linear plan units with commercial buildings were formed along the new matrix route and planned route adjacent to periodical market. In the latter stage, with development of public facilities, private sectors' large circulation institution and terminal outside the kernel with planned routes formed areal block based plan units with commercial and public buildings. And part of the spatial area with the linear plan unit were turned into urban fallow. With the transformation of town plan, new roads outside the kernel have substituted for traditional fixation line of waterway with road and topographical feature. Fringe belts were made successively along the new road and around the major intersections outside of existing urbanized area. Land use in fringe belts, constituting of outer locational tendency early on formation, was gradually replaced with commercial & business buildings.