• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.201-204
• /
• 2003

Plasma lipoproteins transporting cholesterol through blood vessels are divided into three major classes, VLDL, LDL, and HDL. The ratio of HDL cholesterol over the total can be used as an indicator for prognosis of coronary artery diseases. In this study, we have developed two analytical systems for %HDL cholesterol with different flow modes toward gravity and analyzed them for their characteristics and performances.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.416-419
• /
• 2002

There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. The one is using amorphous selenium as photoconductor and the other is using phosphor layer as a light conversion. But each two systems have strength and weakness such as high voltage and blurring effect. In this study, we investigated the electrical characteristic of $multi-layer\left(CaWO_{4}+a-Se \right)$ as a photoconductor according to the changing arsenic composition ratio. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. The arsenic composition ratio of a-Se compound is classified into 7 different kinds which have 0.1%, 0.3%, 0.5%, 1%, 1.5%, 5%, 10% and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 0.3% arsenic showed good characteristic of $2.45nA/cm^2$ dark current and $357.19pC/cm^2/mR$ net charge at $3V/{\mu}m$.

• 시스템엔지니어링학술지
• /
• 제17권2호
• /
• pp.37-48
• /
• 2021

Improving the plant protection system against unforeseen changes/transients during operation is essential to maintain plant safety. Under this condition, it requires rapid and accurate signal processing. The use of an Intellectual Property (IP) core for floating point calculations for Safety Critical MMIS can make numerical computations easier and more precise, improving system accuracy. It can represent and manipulate rational numbers as well as a much broader range of values with dynamic range in nuclear power plant. Systems engineering approach (SE) is used through the development process, it helps to reduce complexity and avoid omissions and invalid assumptions as delivers a better understanding of the stakeholders needs. For the implementation on the FPGA target board, the 32-bit floating-point arithmetic with IEEE-754 standards has designed using Simulink model in Matlab for all operations of addition, subtraction, multiplication and division and VHDL code generated.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.65-72
• /
• 2018

In this paper, we have studied how to reuse common data link software by applying software product line engineering. Existing common data link software performed different stages of design, implementation, and testing without sharing the accumulated knowledge of different developers. In this situation, developers agreed that sharing the assets of each project and reusing the previously developed software would save human and time costs. Even with the initial difficulties, the common Data Link is a continually proposed project in the defense industry, so we decided to build a product line. The common data link software can be divided into two domains. Among them, the initial feature model for the GUI software was constructed, and the following procedure was studied. Through this, we propose a plan to build a product line for core assets and reuse them in newly developed projects.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제11권3호
• /
• pp.246-256
• /
• 2005

규칙 기반 패러다임은 복잡한 프로세스를 처리할 수 있는 정형성과 융통성을 제공하기 때문에 여러 프로세스 중심 소프트웨어 공학 환경에 도입되어 왔다 그러나, 기존의 규칙 기반 패러다임을 채택한 시스템들의 경우 프로세스 모델을 작성하거나 이해하기 어렵고 프로세스 모델링 언어가 확장 또는 개선될 때마다 추론 엔진을 수정하거나 최악의 경우에는 새로 개발하여야 한다. 본 논문에서는 빈번히 발생하는 프로세스 변경에 유동적으로 대처할 수 있으며 프로세스 모델을 규칙기반 언어의 사실로 직관적으로 맵핑함으로써 프로세스의 병렬성을 효과적으로 제어할 수 있다는 규칙 기반 패러다임의 장점을 살리면서 기존 규칙 기반 PSEE의 단점인 사용의 용이성과 추른 엔진의 안정성 문제를 해결한 PRAiSE 시스템을 기술한다. PRAiSE에서는 RAiSE라는 그래픽 프로세스 모델링 언어를 제공하며 작성된 프로세스 모델은 규칙 기반 전문가 시스템 도구인 CLiPS로 구현한 프로세스 엔진에 의해 해석되고 실행된다.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.9-17
• /
• 2017

Concept development of a real-time Field Programmable Gate Array (FPGA)-based switched Ethernet data communication network for the Man-Machine Interface System (MMIS) is presented in this paper. The proposed design discussed in this research is based on the systems engineering (SE) approach. The design methodology is effectively developed by defining the concept development stage of the life-cycle model consisting of three successive phases, which are developed and discussed: needs analysis; concept exploration; and concept definition. This life-cycle model is used to develop an FPGA-based time-triggered Ethernet (TTE) switched data communication network for the non-safety division of MMIS system to provide real-time data transfer from the safety control systems to the non-safety division of MMIS and between the non-safety systems including control, monitoring, and information display systems. The original IEEE standard 802.3 Ethernet networks were not typically designed or implemented for providing real-time data transmission, however implementing a network that provides both real-time and on-demand data transmission is achievable using the real-time Ethernet technology. To develop the design effectively, context diagrams are implied. Conformance to the stakeholders needs, system requirements, and relevant codes and standards together with utilizing the TTE technology are used to analyze, synthesize, and develop the MMIS non-safety data communication network of the APR1400 nuclear power plant.

• 시스템엔지니어링워크숍
• /
• 통권1호
• /
• pp.90-94
• /
• 2003

• 시스템엔지니어링워크숍
• /
• 통권6호
• /
• pp.153-156
• /
• 2005

• 시스템엔지니어링학술지
• /
• 제5권1호
• /
• pp.43-48
• /
• 2009

Korean Tilting trains have been tested on conventional lines since the beginning of 2007 for evaluating its reliability. We achieved some major performance tests which are the maximum operation speed, 180km/h test and the maximum curves increasing speed, over 30 percentage comparing with non-tilling operation train. In order to analysis reliability data of tilting train, we have used the special system engineering frame with interfacing between component suppliers effectively. And also we have developed the data aquisition system which consists of monitor, sensors and depot computer etc. As a results of calculation, until now we realized that the reliability are getting more increasing than starting point of running field test.

• 산업경영시스템학회지
• /
• 제28권1호
• /
• pp.92-96
• /
• 2005

This paper deals with a batch processor model in which the batch processing times depend on the jobs assigned to the batch. Each job has a distinct processing time which is determined as not the exact value but the range from the lower limit to the upper, which makes it possible to group several jobs into the same batch. In point of this flexibility our model can be referred to as the generalization of the bum-in model in which the upper limit of each job is unbounded. The jobs to be scheduled may be available nonsimultaneously. Therefore they have different ready times. We develop the model to describe the problem situation and the heuristic methods to minimize the total tardiness. And our batching rule is compared with other dispatching ones.