• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.15-22
• /
• 2005

This paper proposes an efficient structure which is able to perform self-detection and self-repair for faults in a digital system by imitating the structure of living beings. The self-repair system is composed of artificial cells, which have homogeneous structures in the two-dimension, and spare cells. An artificial cell is composed of a logic block based on multiplexers, and a genome block, which controls the logic block. The cell is designed using DCVSL (differential cascode voltage switch logic) structure to self-detect faults. If a fault occurs in an artificial cell, it is self-detected by the DCVSL. Then the artificial cells which belong to the column are disabled and reconfigured using both neighbour cells and spare cells to be repaired. A self-repairable 2-bit up/down counter has been fabricated using Hynix $0.35{\mu}m$ technology with $1.14{\times}0.99mm^2$ core area and verified through the circuit simulation and chip test.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.189-195
• /
• 2004

A 10 Gb/s limiting amplifier IC with the emitter area of $1.5{\times}10{\mu}m^2$ for optical transmission system was designed and fabricated with a AIGaAs/GaAs HBTs technology. In this stud)', we evaluated fine pitch bump using WL-CSP (Wafer Level-Chip Scale Packaging) instead of conventional wire bonding for interconnection. For this we developed WL-CSP process and formed fine pitch solder bump with the $40{\mu}m$ diameter and $100{\mu}m$ pitch on bonding pad. To study the effect of WL-CSP, electrical performance was measured and analyzed in wafer and package module using WL-CSP. In a package module, clear and wide eye diagram openings were observed and the riselfall times were about 100ps, and the output" oltage swing was limited to $600mV_{p-p}$ with input voltage ranging from 50 to 500m V. The Small signal gains in wafer and package module were 15.56dB and 14.99dB respectively. It was found that the difference of small signal gain in wafer and package module was less then 0.57dB up to 10GHz and the characteristics of return loss was improved by 5dB in package module. This is due to the short interconnection length by WL-CSP. So, WL-CSP process can be used for millimeter wave GaAs MMIC with the fine pitch pad.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.111-117
• /
• 2018

Heterogeneous multi-core environment integrated with different functional cores is the powerful tool for the embedded system that became more complex and diverse. Specialized application requires one chip solution with different operating system over different cores. But this heterogeneity causes difficult configuration of the development environment, makes hard to develop and test software. We show the environment of heterogeneous multi-core processing can be mapped to symmetric multi-core environment. We construct Linux based RPMsg for the data exchange between processes similar with the heterogeneous multi-core RPMsg and experiment that the proposed environment can be used to reduce the steps of the heterogeneous multi-core application development. With this simplification, we suggest simulation method for easy development and debugging the heterogeneous multicore environment that makes complex steps to simple.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.128-137
• /
• 1999

Recently the pelionnance of CO2 arc welding machine has been advanced significantly through the adoption of i invelter circuit topology. which made it possible to improve welding perfonnances such as spatter generation and bead s state. But the conventional inverter arc welding machine generates constant output voltage which cause much spatter g generation dUling short-circuit and arc start time because it is unable to control output current instantaneously. So this p paper representes wavefCnm controlled inverter arc welding machine which control the wavefonn of welding current and t thus to suppress the spatter generation. And the system designed in this paper is the digital controller using single chip m microprocessor of 80C196KC. As a result of perfonnance test for this system, the spatter generation is reduced and s shOlt-circuit time period is stabilized compared to conventional one. And more by using switched mode rectifier for A AC/DC power convelter. unity power factor is maintained and low order halmonic spectrum is supressed.

• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.188-198
• /
• 2018

In this study, we propose an approach for the design and satisfy the requirements of the fabrication of a small, lightweight, reliable, and stable ultra-wideband receiver for millimeter-wave bands and the contents of the approach. In this paper, we designed and fabricated a stable receiver with having low noise figure, flat gain characteristics, and low noise characteristics, suitable for millimeter-wave bands. The method uses the chip-and-wire process for the assembly and operation of a bare MMIC device. In order to compensate for the mismatch between the components used in the receiver, an amplifier, mixer, multiplier, and filter suitable for wideband frequency characteristics were designed and applied to the receiver. To improve the low frequency and narrow bandwidth of existing products, mathematical modeling of the wideband receiver was performed and based on this spurious signals generated from complex local oscillation signals were designed so as not to affect the RF path. In the ultra-wideband receiver, the gain was between 22.2 dB and 28.5 dB at Band A (input frequency, 18-26 GHz) with a flatness of approximately 6.3 dB, while the gain was between 21.9 dB and 26.0 dB at Band B (input frequency, 26-40 GHz) with a flatness of approximately 4.1 dB. The measured value of the noise figure at Band A was 7.92 dB and the maximum value of noise figure, measured at Band B was 8.58 dB. The leakage signal of the local oscillator (LO) was -97.3 dBm and -90 dBm at the 33 GHz and 44 GHz path, respectively. Measurement was made at the 15 GHz IF output of band A (LO, 33 GHz) and the suppression characteristic obtained through the measurement was approximately 30 dBc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.451-459
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1439-1444
• /
• 2005

Induction motors are the most commonly used electrical drives because they are rugged, mechanically simple, adaptable to widely different operating conditions, and simple to control. The most common faults in squirrel-cage induction motors are bearing, stator and rotor faults. Surveys conducted by the IEEE and EPRI show that the most common fault in induction motor is bearing failure (${\sim}$40% of failure). Thence, this paper addresses experimental results for diagnosing faults with different rolling element bearing damage via motor current spectral analysis. Rolling element bearings generally consist of two rings, an inner and outer, between which a set of balls or rollers rotate in raceways. We set the experimental test bed to detect the rolling-element bearing misalignment of 3 type induction motors with normal condition bearing system, shaft deflection system by external force and a hole drilled through the outer race of the shaft end bearing of the four pole test motor. This paper takes the initial step of investigating the efficacy of current monitoring for bearing fault detection by incipient bearing failure. The failure modes are reviewed and the characteristics of bearing frequency associated with the physical construction of the bearings are defined. The effects on the stator current spectrum are described and related frequencies are also determined. This is an important result in the formulation of a fault detection scheme that monitors the stator currents. We utilized the FFT, Wavelet analysis and averaging signal pattern by inner product tool to analyze stator current components. The test results clearly illustrate that the stator signature can be used to identify the presence of a bearing fault.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.23-30
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.12-19
• /
• 2016

The monitoring system in railway is under study to forecast any derailment and accident by defect of train. Because the monitoring system is composed of wireless sensor network based on ZigBee-communication between inside and outside of train, the study for wireless channel analysis is required. Especially, if multipath delay profile exist in the channel, the equalizer and channel estimator can be required for preventing receiver performance degradation. Therefore, we analyzed the wireless channel in train environment using measured data and, proposed the channel estimation method through the characterisitic of chip code, under the consideration of the channel characteristics in train. To show the performance of proposed method, we demonstrate the performance by mean square error(MSE), computational complexity and bit error rate(BER).

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.542-546
• /
• 2008

Recently dual-port SDRAM (DPSDRAM) architecture tailored for dual-processor based mobile embedded systems has been announced where a single memory chip plays the role of the local memories and the shared memory for both processors. In order to maintain memory consistency from simultaneous accesses of both ports, every access to the shared memory should be protected by a synchronization mechanism, which can result in substantial access latency. We propose two optimization techniques by exploiting the communication patterns of target applications: lock-priority scheme and static-copy scheme. Further, by dividing the shared bank into multiple blocks, we allow simultaneous accesses to different blocks thus achieve considerable performance gain. Experiments on a virtual prototyping system show a promising result - we could achieve about 20-50% performance gain compared to the base DPSDRAM architecture.