• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1255-1276
• /
• 2015

The importance of considering soil-structure interaction effect in the analysis and design of RC frame buildings is increasingly recognized but still not penetrated to the grass root level owing to various complexities involved. It is well established fact that the soil-structure interaction effect considerably influence the design of multi-storey buildings subjected to lateral seismic loads. The shear walls are often provided in such buildings to increase the lateral stability to resist seismic lateral loads. In the present work, the linear soil-structure analysis of a G+5 storey RC shear wall building frame resting on isolated column footings and supported by deformable soil is presented. The finite element modelling and analysis is carried out using ANSYS software under normal loads as well as under seismic loads. Various load combinations are considered as per IS-1893 (Part-1):2002. The interaction analysis is carried out with and without shear wall to investigate the effect of inclusion of shear wall on the total and differential settlements in the footings due to deformations in the soil mass. The frame and soil mass both are considered to behave in linear elastic manner. It is observed that the soil-structure interaction effect causes significant total and differential settlements in the footings. Maximum total settlement in footings occurs under vertical loads and inner footings settle more than outer footings creating a saucer shaped settlement profile of the footings. Each combination of seismic loads causes maximum differential settlement in one or more footings. Presence of shear wall decreases pulling/pushing effect of seismic forces on footings resulting in more stability to the structures.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.1
• /
• pp.39-51
• /
• 2016

Extreme floods occur more often recently as the frequency of extreme storm events increase due to the climate change. Because the extreme flood exceeding the design flood can cause large-scale disasters, it is important to predict and prepare for the future extreme flood. Flood flow is affected by two main factors; rainfall and land use. To predict the future extreme flood, both changes in rainfall due to the climate change and land use should be considered. The objective of this study was to simulate the future design flood in the Hwangguji river watershed, South Korea. The climate and land use change scenarios were derived from the representative concentration pathways (RCP) 4.5 and 8.5 scenarios. Conversion of land use and its effects (CLUE) and hydrologic modelling system (HEC-HMS) models were used to simulate the land use change and design flood, respectively. Design floods of 100-year and 200-year for 2040, 2070, and 2100 under the RCP4.5 and 8.5 scenarios were calculated and analyzed. The land use change simulation described that the urban area would increase, while forest would decrease from 2010 to 2100 for both the RCP4.5 and 8.5 scenarios. The overall changes in design floods from 2010 to 2100 were similar to those of probable rainfalls. However, the impact of land use change on design flood was negligible because the increase rate of probable rainfall was much larger than that of curve number (CN) and impervious area.

• Bulletin of the Korean Mathematical Society
• /
• v.29 no.1
• /
• pp.125-135
• /
• 1992

In various viscus flow problems it has been the custom to replace the convective derivative by the ordinary partial derivative in problems for which the data are small. In this paper we consider the Benard Convection problem with small data and compare the solution of this problem (assumed to exist) with that of the linearized system resulting from dropping the nonlinear terms in the expression for the convective derivative. The objective of the present work is to derive an estimate for the error introduced in neglecting the convective inertia terms. In fact, we derive an explicit bound for the L$_{2}$ error. Indeed, if the initial data are O(.epsilon.) where .epsilon. << 1, and the Rayleigh number is sufficiently small, we show that this error is bounded by the product of a term of O(.epsilon.$^{2}$) times a decaying exponential in time. The results of the present paper then give a justification for linearizing the Benard Convection problem. We remark that although our results are derived for classical solutions, extensions to appropriately defined weak solutions are obvious. Throughout this paper we will make use of a comma to denote partial differentiation and adopt the summation convention of summing over repeated indices (in a term of an expression) from one to three. As reference to work of continuous dependence on modelling and initial data, we mention the papers of Payne and Sather [8], Ames [2] Adelson [1], Bennett [3], Payne et al. [9], and Song [11,12,13,14]. Also, a similar analysis of a micropolar fluid problem backward in time (an ill-posed problem) was given by Payne and Straughan [10] and Payne [7].

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2165-2166
• /
• 2006

Estrangement hierarchical by bipolarization is deepened and time space that social welfare by graying corresponds great so. Specially, is real condition that indifference by patient's increase which is solitary life string is come to involve by social problem.Together, Jaetaek bone fracture patient's ratio is zooming. Domestic BT technology, medical treatment solution technology offer more important role than role assistance enemy of modern technology and utilize by creative technology can. Specially, if apply supersonic waves in bone fracture treatment, there is treatise data that can reduce bone fracture treatment period of bone that bone does not stick well about 40%. Supersonic waves operation frequency used on both end because do 1m Hz, 1.3mHz, supersonic waves origination that have 1.5mHz's Piezo-ceramic crystal tranducer material each 4 premature senilitys in this research, and outside diameter according to impedance and Phase d used Gakgak4mm, 5.4mm, Dukke0.5mm, transformer deuce of length 70mm. Manufactured, and investigated supersonic waves distribution chart by capacity 50m W. Supersonic waves used by diagnosis mainly but is seen to become convenient medical treatment mounting in bone fracture patient's treatment if supplement clinically.If supplement system furthermore, is going to apply to osteoporosis patient, and this research tried to design poetic theme width directly and study rain standardization special quality and approach basic form because do modelling.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1344-1348
• /
• 2008

HMS(Hydrological Modelling system)는 유역의 지형자료와 강우와 같은 기상관련 시계열 자료 등 수문 유출과 관련되는 많은 매개변수를 포함하고 있으며, 모형의 구동을 위해서는 다양한 공간 비공간 자료 및 시계열 자료가 요구된다. 특히 다양한 비공간 정보의 경우 이를 모형에 적용하기 위해서는 비공간 정보에 대한 열람, 선택, 편집, 적용 시나리오의 설정, 입력변수의 적절성 평가, 모형 구동결과의 검 보정 등 복잡한 절차가 필요하다. 최근 들어 공간자료의 효율적 처리를 위해서 지리정보시스템과 수리 수문모델들 간의 연계를 통한 자료 생성과 입력 및 분석과정을 일괄적으로 처리하고자 하는 연구들이 발표되고 있다. 본 연구에서는 한국형 수자원지리정보시스템인 HyGIS와 HMS 모형의 연계 시스템인 HyGIS-HMS의 개t선과 적용성 평가를 목표로 하고 있다. 이를 위하여 HyGIS-HMS 데이터 모델을 기반으로 하는 시스템의 운영 프로세스를 재정립하였다. HyGIS에서 구축된 공간 DB를 이용하여 HMS 모형의 입력 지형인자를 계산하고 있으며, 수문시계열 자료는 HyGIS의 시계열 DB를 이용하고 있다. HMS에서는 공간 자료와 시계열 자료 외에도 다양한 비공간 자료를 이용하고 있다. 이러한 비공간 정보를 DB기반 시스템에 맞추어 효과적으로 관리 및 사용하기 위하여 HyGIS-HMS에서는 Static DB를 이용하고 있으며, Static DB에서 모형의 입력자료로 직접 이용되는 자료와 모형의 수행결과는 Dynamic DB를 이용하고 있다. 또한 개발된 시스템을 경안천 유역에 적용하여 2006년과 2007년의 유출특성을 분석하였다. 이러한 개발환경의 적용을 통해 HyGIS 데이터모델과 HyGIS-Model의 운영환경이 HyGIS-HMS개발에 효과적으로 이용될 수 있는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.40-48
• /
• 2008

The Waimea Basin is located on the northern tip of the South Island of New Zealand. It is a highly productive area with intense water use with multi-stakeholder interest in water. Irrigation from the underground aquifers here makes up the largest portion of used water; however the same aquifers are also the key urban and industrial sources of water. The Waimea/Wairoa Rivers are the main sources of recharge to the underlying aquifers and also feed the costal springs that highly valued by the community and iwi. Due to the location of the main rivers and springs close to the urban centre the water resource system here has high community and aesthetic values. Recent enhanced hydrological modelling work has shown the water resources in this area to be over allocated by 22% for a 1:10 year drought security for maintaining a minimalistic flow of 250 l/s in the lower Waimea River. The current irrigated land area is about 3700 hectares with an additional potential for irrigation of 1500 hectares. Further pressures are also coming on-line with significant population growth in the region. Recent droughts have resulted in significant water use cutbacks and the threat of seawater intrusion in the coastal margins. The Waimea Water Augmentation Committee (WWAC) initiated a three year stage 1 feasibility study in 2004/2005 into the viability of water storage in the upper parts of the catchment for enhancing water availability and its security of supply for consumptive, environmental, community and aesthetic benefits downstream. The project also sought to future proof water supply needs for the Waimea Plains and the surrounding areas for a 50 - 100 year planning horizon. The broad range stage 1 investigation programme has identified the Upper Lee Catchment as being suitable for a storage structure to provide the needs identified and also a possibility for some small scale hydro electricity generation as well. The stage 2 detailed feasibility investigations that are underway now (2007/2008), and to be completed in two years is to provide all details for progressing with the next stage of obtaining necessary permits for construction and commissioning a suitable dam.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.4
• /
• pp.389-395
• /
• 2006

This paper proposes the controller for biped robot using intelligent control algorithm. In order to simplify the complexity of biped robot control, manipulator of biped robot is divided into four modules. These modules are controlled by intelligent algorithm with Hierarchical Mixture of Experts(HME) using neural network. Also neural network having direct control method learns the inverse dynamics of biped robot. The HME, which is a network of tree structure, reallocates the input domain for the output by learning pattern of input and output. In this paper, as a result of learning HME repeatedly with EM algorithm, the controller for biped robot operating safety walking is designed by modelling dynamics of biped robot and generating virtual error of HME.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1295-1303
• /
• 2010

In this paper, an effective method has been proposed for selection of white Gaussian noise(WGN) band for radio background noise measurement system under broad band noise environment. MMN which comes from industrial devices and equipment mostly happens in the shape of broad band noise mostly like impulsive noise and this is the main reason for increasing level in the present radio noise measurements. The existing method based on singular value decomposition has weak point that it cannot give good performance for the broad band signal because it uses signal's white property. The proposed method overcomes such a weakness of singular value decomposition based method by using signal's Gaussian property based method in parallel. Moreover, this proposed method hires a modelling based method which uses parameter estimation algorithm like maximum likelihood estimation(MLE) and gives more accurate result than the method using amplitude probability distribution(APD) graph. Experiment results under the natural environment has done to verify feasibility of the proposed method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.159-166
• /
• 2020

In this paper, we propose a heterogenous mission allocation technique for multi-UAV system based on discrete event modeling. We model a series of heterogenous mission creation, mission allocation, UAV departure, mission completion, and UAV maintenance and repair process as a mathematical discrete event model. Based on the proposed model, we then optimize the number of UAVs required to operate in a given scenario. To validate the optimized number of UAVs, the simulations are executed repeatedly, and their results are analyzed. The proposed mission allocation technique can be used to efficiently utilize limited UAV resources, and allow the human operator to establish an optimal mission plan.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.570-576
• /
• 2015

3D visualization of navigation simulation is to visualize the environment conditions (e.g. nearby ships, dynamic characteristics, environment, terrain, etc) for any users on ships at sea. Realistic 3D visualization enables the users to be immersed to it and guarantees the reliability of the simulation. In particular, terrain visualization contains many virtual objects, so it is time and cost-intensive for object modelling. This paper proposes a 3D terrain visualization method that can be realized in a short time and with low cost by using the Unity 3D development tool. The 3D terrain visualization system requires bathymetric and elevation terrains, and Aids to Navigations (AtoNs) to be realized. It also needs to include 3D visualization objects including bridges, buildings and port facilities for more accurate simulation. Bathymetric and AtoN elements are acquired from ENC, and the elevation element is acquired from SRTM v4.1 digital elevation chart database developed by NASA. Then, the bathymetric and elevation terrains are generated, and the satellite images are superposed by using this terrain information. The longitudinal and latitudinal information of the AtoNs are converted to the 3-axis information to position the AtoN locations. The 3D objects such as bridges, buildings and port facilities are generated and the terrain visualization is completed. The proposed method realizes more realistic 3D terrain visualization of Busan Port.