• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.397-412
• /
• 1995

The purpose of this study was to analyze the stress distribution in the dentin and post structures by the various post core materials and the amount of remaining coronal tooth structures. The 2-dimensional finite element models of mandibular 2nd premolars was divided into seven types according to the various amount of remaining coronal tooth structures. All types were modeled using equal length, diameter and shape of the post. 2 types of post and core materials were used : 1) cast gold post and core 2) stainless steel post and compsite resin core 10 Newton force was applied as follows 1) vertical force on occlusal fossa 2) $45^{\circ}$ oblique force on buccal surface of buccal cusp tip The results were as follows : 1. There was no apparent difference in the pattern of stress distribution according to the amount of remaining coronal tooth structure. 2. There was no apparent difference in the pattern of stress distribution within the dentin according to the post and core materials. A cast gold post and core generated lower dentin stress than a stainless steel post and resin core. 3. Max. dentinal stress resulting from vertical force was observed in the lingual side of dentin around the crown margin.This stress resulting from oblique force was observed in the lingual root surface of alveolar bone crest level.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.161-167
• /
• 2010

CEU(Camera Electronic Unit) loaded in optical satellite for a high resolution image acquisition is composited with CC(Camera Controlloer), FPA(Focal Plane Assembly) and CEUP(CEU Power supply). EMC test and analysis results are explained in this paper. CE, CS, RE and RS test is performed in the 1st EMC test, RE, RS test which is not complied and influence considerably after shielding structure is performed in the 2nd EMC test. An effect due to the noise of CEU in the GPS/S-band receiving band is analyzed based on 2nd EMC test results. Margin more than 6dB is guaranteed when CEU is shielded.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.489-498
• /
• 2003

Recently to introduce new services of ultra-high speed wireless access and systems beyond the 3rd generation mobile communication, 5 GHz band has been highly interested. As a way of getting the required frequency, it is considered that microwave relay bands below 6 GHz, which shows a slow decrease in demand and less cost-effectiveness, should be moved to other bands above 6 GHz. In this paper, as a tool for analyzing microwave link design and its service quality, the outage prediction based upon Vigants & Barnett＇s model is reviewed. To show outage and availability calculation, simulations are performed for the operating 4 GHz radio sites, and some results and features regarding frequency movement to 6.7 as well as 8 GHz are also discussed in terms of diversity techniques, bit error rate, and availability As the results, it is confirmed that only the diversity techniques of space or space and frequency can satisfy the annual objective of availability irrespective of frequency movement.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.257-265
• /
• 2015

The outsourcing has become a general part of the convergence in modern game development process for generating a higher profit margin. This study examines and defines the work competences required for the game graphic designers in a collaboration performance of outsourcing. In this study, we introduce the basic concept and advantages of the outsourcing and extend prior work on identifying three work competencies of graphic designers. We conducted in-depth case studies of outsourcing system used by North America's major game developer. The findings from this study offer insights into the essential core competencies expected for graphic designers, providing effective guideline from the practical perspective.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.409-416
• /
• 2015

Purpose: This study evaluates a new banana bulk packaging method under the real transport conditions of Sri Lanka. Methods: A field evaluation of optimized 8-mm thick Styrofoam sheets used as the cushioning material was applied. A trial transport was conducted from Thambuttegama to Colombo using a medium-sized open truck, with banana leaves as the control material. Data were recorded at the farmer, transporter, retailer, and consumer stages of the supply chain. Mechanical damage, physiological loss in weight, fruit firmness, total soluble solids, ripeness index, visual quality ratings, and the physical damage index of the bananas were measured at each stage. A cost-benefit analysis was also conducted for both packaging methods. Results: The 8-mm styrofoam sheets significantly reduced (p < 0.05) the mechanical damage from 26.3% to 12.9% compared to the conventional method for long-distance transport, and the physiological loss in weight showed a decrease of 2.88%. The loss of firmness of the fruits followed a simmilar pattern for both methods until reaching the retailer, but at the consumer was significantly higher (p < 0.05) for the control. However, the physical damage index at the retail stage for the control showed symptoms of physical injury, whereas the bananas transported using the cushioning materials exhibited only minor symptoms. Further, the visual quality of the fruits after transport from the farmer to the consumer was preserved, which is one of the main factors affecting consumer preference and retail price. The proposed method increases the profit margin by 51.2% for Embul bananas owing to the reduced postharvest losses. Conclusion: The 8-mm thick Styrofoam sheets reduced the physical damage to the bananas, with the quality parameters maintained at the prefered level. Moreover, profits may be increased.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2002

The plasma display panel with the electrode structure of new discharge AND gate was proposed and the driving system for experiment was developed. And discharge AND gate operation was verified. Discharge AND gate operated by the operation speed of 8${\mu}\textrm{s}$ and the operation margin of 20V. It was known to be able to control the discharge of the adjoining scan electrode accurately. Because this method uses the DC discharge, the control of the discharge can be facilitated compared with conventional discharge AND gate. Moreover, because the input discharge and the output discharge of AND gate are separate, the display discharge can be prevented from passing AND gate. Therefore it is possible to app1y to the large screen plasma display. And the decrease of contrast ratio does not occur because the scanning discharge does not influence the picture quality.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.569-579
• /
• 2005

International capital movement has made progress at global liberalization of finance and foreign exchange, international monetary norm changing into floating exchange rate system, easiness of collection of information and trade at improvement of information communication technology from early of 1970's. Results of empirical test for relation between foreign exchange rate or various determination factors of foreign exchange rate and interest rate are followed by next sentences. First, according to relation between foreign exchange rate and interest rate, correlation for each of variables after OECD entrance is increased. 'But, long-term & short-term interest rate is affected by Hanbo & Kia's bankruptcy, continuous large scale coporates bankruptcy and crisis of foreign exchange. Therefore, financial instability is occured. If portfolio investment fund has been inflow as it is mollified by continuous shortage of foreign exchange and fall of country's credit rating, it is expected to have positive effect for long-term & short-term interest rate from appreciation of won against dollar. Second, results from relation between determination factor of foreign exchange rate and interest rate are followed by next sentences. If surplus of current account and goods account is continued, yield of corporate bond is to be stable. But, margin of surplus is expected to diminish after second quarter 98, and difference between external and domestic interest (after adjusting foreign exchange rate) is to be diminished. And if net inflows of foreign investor's fund (stock and bond) is diminished, it is to have negative effect for yield of corporate bond. According to foreign investor's investment movement of previous years, hedge fund were stayed at least during two years in Mexico. It means that sudden capital outflow is not to be happened at Korea.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.16-26
• /
• 2010

The transmission valuation methodology we propose here captures the interaction between generation and transmission investment decisions recognizing that a transmission expansion can impact the profitability of new resources investment, so that a methodology should consider both the objectives of investors in resources and the transmission planner. In this perspective, this paper purports to develop the mixed-integer programming based transmission expansion planning optimization software, which is well designed to determine the construction time and place of new generators, transmission lines, and substations as well as their capacities to minimize total expenditures related to their investment and operations while meeting technical constraints such as capacity margin, constitution ratio of power resources, spinning reserves, energy and fuel constraints, transmission line outages and losses, pi-type branching, and so on. Finally, Garver's simple system is adopted to validate not simply the accuracy but the efficiency of the proposed model in this paper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.344-350
• /
• 2013

The purpose of this study is to examine the structural stability of a low speed 200 W class gyromill type vertical axis wind turbine system. For the analysis, a commercial code is adopted. The pressure distribution on the rotor blade surface is examined in detail. In order to perform unidirectional FSI(Fluid-Structure Interaction) analysis, the pressure resulted from CFD analysis has been mapped on the surface of wind turbine as load condition. The rotational speed and gravitational force of wind turbine are also considered. The results of FSI analysis show that the wind turbine reveals an enough structural margin. The maximum structural displacement occurs at trailing edge of blade and the maximum stress occurs at the strut.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.581-588
• /
• 2008

Purpose: It is generally accepted that anatomical structures of the soft tissue in Asian faces are quite different from those in Caucasian. It is presumed that these differences are due to collagen rich thick dermis and durable superficial musculo-apponeurotic system (SMAS) in Asian. We classified the aging lower eyelids and reviewed the operative procedures according to the types of aging lower eyelids in Asian. Methods: We compared preoperative and postoperative photos of 117 patients over 30 years of age, who underwent lower blepharoplasty at the Kyunghee Medical Center from January 2001 to April 2006. We classified the patients based on the degree of skin laxity, presence of nasojugal groove and malar bag, the extent of aging process. We also reviewed the operative procedures according to each type of classification. Results: We classified our patients into four types as following. Type I patients showed minimal skin-muscle excess confined to lower eyelids regardless of the facial line. For these patients, we performed only transcutaneous or transconjunctival blepharoplasty. In type II patients, nasojugal grooves were shown and skin- muscle laxity was limited to the medial side of imaginary vertical line at lateral margin of pupil. In these cases, we performed free fat graft or fat repositioning on nasojugal groove or fat removal and septal duplication confined to medial side. Type III patients displayed more advanced medial bulging and remarkable laxity over the lateral side, the same operation methods as those of type II were applied at the lateral side of the line. Type IV patients demonstrated extensive midfacial aging changes including malar bags and underwent superficial subciliary cheek lift. Conclusion: The lower eyelid aging of Asian is different from those of Caucasian. We think that our classification is useful in selection of appropriate operative procedure to address specific problems for Asian patients.