• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.103-104
• /
• 2006

In this paper, we analyze the UAV datalink design with calculating link budget of long-distance (200 km) Ku-band LOS wireless link. We calculate C/N of the real system and compare it with the required C/N, using the CCIR reports. In the rainy day of summer on the Korean peninsula, to maintain percent reliability 90% and BER 10^(-5) together, link budget of uplink of the system has a lot of margin at 200 km, link budget of downlink using the block turbo code is enough for distance 200 km.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• The Korean Journal of Petroleum Geology
• /
• v.6 no.1_2 s.7
• /
• pp.20-24
• /
• 1998

Expert system is one type of artificial intelligence softwares that incorporate problem-solving knowledges and experiences of human experts by use of symbolic reasoning and rules about a specific topic. In this study, an expert system, PLAYMAKER2, is used to interpret sedimentary facies and depositional settings of the sedimentary sequence. The original version of the expert system, PLAYMAKER, was developed in University of South Carolina in 1990, and modified into the present PLAYMAKER2 with some changes in the knowledge-base of the previous system. The late Cenozoic sedimentary sequence with maximum 10,000 m in thickness, which is located in the Korean Oil Exploration Block VI-1 at the southwestern margin of the Ulleung Basin, is analysed by the expert system, PLAYMAKER2. The Cenozoic sedimentary sequence is divided into two units-lower Miocene and upper Pliocene-Pleistocene sediments. The depositional settings and sedimentary facies of the Miocene sediments interpreted by PLAYMAKER2 in terms of belief values are: for depositional settings, slope; $57.4\%$, shelf; $21.4\%$, basin; $10.1\%$, and for sedimentary facies, submarine fan; $35.7\%$, continental slope; $26.3\%$, delta; $16.1\%$, deep basinplain; $6.1\%$ continental shelf; $3.2\%$, shelf margin; $1.4\%$. The depositional settings and sedimentary facies of the Pliocene-Pleistocene sediments in terms of belief values we: for depositional settings, slope; $59.0\%$, shelf; $22.8\%$, basin; $7.0\%$, and for sedimentary facies, delta; $24.1\%$, continental slope; $22.2\%$, submarine fan; $17.3\%$, continental shelf; $7.0\%$, deep basinplain; $4.8\%$, shelf margin; $2.6\%$. The comparison of the depositional settings and sedimentary facies consulted by PLAYMAKER2 with those of the classical interpretation from previous studies shows resonable similarity for the both sedimentary units-the lower Miocene sediments and the upper Pliocene-Pleistocene sediments. It demonstrates that PLAYMAKER2 is an efficient tool to interpret the depositional setting and sedimentary facies for sediments. However, to be a more reliable system, many sedimentologists should work to refine and add geological rules in the knowledge-base of the expert system, PLAYMAKER2.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.355-362
• /
• 2005

Deregulations and market practices in power industry have brought great challenges to the system planning area. In particular, they introduce a variety of uncertainties to system planning. New techniques are required to cope with such uncertainties. As a promising approach, probabilistic methods are attracting more and more attentions by system planners. In small signal stability analysis, generation control parameters play an important role in determining the stability margin. The objective of this paper is to investigate power system state matrix sensitivity characteristics with respect to system parameter uncertainties with analytical and numerical approaches and to identify those parameters have great impact on system eigenvalues, therefore, the system stability properties. Those identified parameter variations need to be investigated with priority. The results can be used to help Regional Transmission Organizations (RTOs) and Independent System Operators (ISOs) perform planning studies under the open access environment.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.575-582
• /
• 2004

Fully-depleted silicon-on-insulator (FD-SOI) devices with a 15 nm SOI layer thickness and 60 nm gate lengths for analog applications have been investigated. The Si selective epitaxial growth (SEG) process was well optimized. Both the single- raised (SR) and double-raised (DR) source/drain (S/D) processes have been studied to reduce parasitic series resistance and improve device performance. For the DR S/D process, the saturation currents of both NMOS and PMOS are improved by 8 and 18%, respectively, compared with the SR S/D process. The self-heating effect is evaluated for both body contact and body floating SOI devices. The body contact transistor shows a reduced self-heating ratio, compared with the body floating transistor. The static noise margin of an SOI device with a $1.1\;{\mu}m^2$ 6T-SRAM cell is 190 mV, and the ring oscillator speed is improved by 25 % compared with bulk devices. The DR S/D process shows a higher open loop voltage gain than the SR S/D process. A 15 nm ultra-thin body (UTB) SOI device with a DR S/D process shows the same level of noise characteristics at both the body contact and body floating transistors. Also, we observed that noise characteristics of a 15 nm UTB SOI device are comparable to those of bulk Si devices.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.313-319
• /
• 2014

The objectives of power system operations are to preserve system stability and reliability as well as to supply proper electric power. For an activation of these objectives, voltage and reactive power should be considered. There are a number of types about reactive power sources, and an insertion of shunt capacitor banks are one of the method to support bus voltage adjacent. This paper includes the design procedure to determine the hybrid type capacitor bank configurations on power system to improve stability and reliability. This procedure includes the capacitor bank capacity calculation, reactor type selection, and reactor capacity calculation. The total capacity calculation of capacitor bank is based on the reactive power margin which is calculated through system studies such as, contingency analysis and Q-V analysis. In the second step, the reactor type and its capacity can be determined through the harmonic analysis. This paper shows that the harmonics are decreased by the proposed hybrid type capacitor bank, especially 5th and 7th harmonics.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.155-161
• /
• 2014

The objective of this study is to weight analysis portable backpack system of infantry weapon systems for ergonomic design in manual materials handling tasks. For the product design, we analyzed the ergonomic guidelines and status of similar weapon systems by comparing the efficient operation performance provide for the basic data. Result of this study, the relationship between portability and mobility presented for schematic. In the short distance of the short biomechanical criterion, 1-2 hours in the middle of moving psychophysical criterion, 4 hour or more long-distance criterion applied for the physiological criterion for easy of trade-offs that need to be considered. This study suggests for 4 research items for infantry backpack system in manual materials handling tasks. Throughout the result of anthropometric populations, the 5%tile body weight for -0.91kg but 95%tile in 34.17kg considered to be margin for free, easy and efficient operation for the weight margin between portability and mobility in manual materials handling tasks.

• Korean Journal of Veterinary Research
• /
• v.36 no.1
• /
• pp.23-29
• /
• 1996

This study was carried out to identify the gross anatomical and radiographic characteristics of the nasolacrimal system of the Korean native goat. The results were as follows : The nasolacrimal system are composed of two lacrimal ducts, two lacrimal, canaliculus, one lacrimal sac and one nasolacrimal duct. The nasolacrimal duct was divided into proximal, middle and distal portion. The nasolacrimal duct took a straight course to be paralleled with nasal bones and opened close to the nostril on the medial surface of the alar fold. The diameter of lacrimal punctum, the length of eyelid margin to lacrimal punctum, the length of canaliculus and the diameter of lacrimal sac were 0.82~0.90mm, 1.06~1.54mm, 5.65~6.30mm and 1.77~2.06mm, respectively. The length of proximal, middle and distal nasolacrimal duct were 36.84~40.00mm, 23.53~24.31mm and 14.55~14.73mm, respectively. The diameter of the orifice of nasolacrimal duct, the length of lateral margin of nostril to orifice of nasolacrimal duct and the length of dorsum to orifice of nasolacrimal duct were 1.29~1.33mm, 12.97~12.53mm and 15.24~16.11mm. The skull index of Korean native goat was not significantly different from the length of nasolacrimal duct.

• Architectural research
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2023

Structural ageing influences the structural performance in a negative way by reducing the seismic resilience of the structure which makes it a major concern around the world. Retrofitting is considered to be a pragmatic and feasible solution to address this issue. Numerous retrofitting techniques are devised by researchers over the years. The viability of using steel bracings as retrofitting component is evaluated on a G+30 storied building model designed according to ACI318-14 and ASCE 7-16. Four different types of steel bracing arrangements (V, Inverted V/ Chevron, Cross/ X, Diagonal) are assessed in the model developed in commercial nu-merical analysis software while considering both material and geometric nonlinearities. Reducing displacement and cost in the structures indicates that the design is safe and economical. Therefore, the purpose of this article is to find the best bracing system that causes minimum displacement, which indicates maximum lateral stiffness. To evaluate the seismic vulnerability of each system, incremental dynamic analysis was conducted to develop fragility curves, followed by the formation of collapse margin ratio (CMR) as stipulated in FEMA P695 and finally, a cost estimation was made for each system. The outcomes revealed that the effects of ge-ometric nonlinearity tend to evoke hazardous consequences if not considered in the structural design. Probabilistic seismic and economic probes indicated the superior performance of V braced frame system and its competency to be a germane technique for retrofitting.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.779-782
• /
• 1996

Repetitive control is a proposed control strategy in view of the internal model principle and achieves a high accuracy asymptotic tracking property by implementing a model that generates the periodic signals of period into the closed-loop system. Since the repetitive control system contains a periodic signal generator with positive feedback loop, which reduces the stability margin, in the overall closed-loop system, the stability of the closed-loop system should be considered as an important problem. In case that a real system has plant uncertainties which are not represented through modeling, the robust stability problem of the repetitive control system has not been considered sufficiently. In this paper, we propose the robust stability condition for the system with modeling uncertainty. The proposed robust stability condition will be obtained using the robust performance condition in the H$_{\infty}$ control. Moreover, by use of the proposed robust stability condition, we propose a procedure that designs a repetitive controller and a feedback controller simultaneously which can stabilize the overall closed-loop system robustly and which can also do the closedloop system without repetitive controller..