• 대한인간공학회지
• /
• 제30권4호
• /
• pp.481-489
• /
• 2011

Objective: The aim of this study was to develop an ergonomic checklist (AULA: Agricultural Upper-Limb Assessment) which can assess the risks of the work-related upper limb disorders of farming tasks in Korea. Background: There are few assessment tools that reflect the current condition of agricultural works as of now. Method: AULA was developed as following three stages. First of all, a physiological experiment was conducted with selected 14 upper limb postures which are frequently occurred in farming tasks and then, an ergonomic checklist was developed with determining risk levels of each body posture based on the experimental findings. Lastly, the ergonomic checklist was validated by comparing with the existing assessment tools. Results: When comparing the AULA which was developed in this study with the existing assessment tools, it was found that the AULA may get over limits of the existing ones which are sensitive to particular postures, but aren't sensitive to the rest of them. Conclusion: It is predicted that the developed upper limb posture assessment tool which gets over the existing tools' limits and is proper for domestic farm work conditions, will help to reduce musculoskeletal disorders caused by farm works, by assessing farm works more easily and objectively. Application: By further developing the theoretical groundwork on the induction of muscular skeletal system symptoms relating to agricultural works, it is expected to improve the level of preventing and managing such muscular skeletal system symptoms in the field of agricultural and farming works, which is relatively less advanced in terms of labor difficulties.

• 대한인간공학회지
• /
• 제29권6호
• /
• pp.933-942
• /
• 2010

Objective: To develop an ergonomic evaluation tool which can be apply to assess the lower-limb postures associated with farming tasks. Background: In general, most of existing ergonomic assessment tools was developed to investigate the work-related musculoskeletal disorders of the upper-limb postures in manufacturing industry. Methods: As the first step of development of the evaluation tool, 13 lower-limb postures that were commonly observed in farming task were investigated by the subjective discomfort ratings, heart rates, and muscle activities. And then, an ergonomic evaluation tool for the lower-limb postures was developed based on results of the first experiment. Lastly, the ergonomic checklist which was developed in the current study was compared with other existing ergonomic assessment tools. Results: Based on the results of comparisons between a newly developed assessment tool and other existing assessment tools, it was found that a newly developed tool can perceive more sensitively for the various lower-limb postures than other assessment tools. Conclusions: Lower-limb posture assessment tool which can evaluate and assess risks of lower-limb WMSDs which were prevalent in farming tasks more easily and accurately was developed in this study. The lower-limb assessment tool can also be utilized to prevent WMSDs related with lower-limbs as well as improve working environments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.962-966
• /
• 2004

Ball screw feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modern machine tools require high speed and high precision and drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slide system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a ball screw, for its minimum vibrations. Firstly, a 6-degree-of-freedom lumped parameter model was proposed for the vibration analysis of a ball screw driven machine tool feed drive system. Next, a feed rate optimization of the feed slide was carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile having finite jerk. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.123-128
• /
• 1994

A high speed spindle system for machine tools can be used to reduce the machining time, to improve the machining accuracy, to perform the machining of light metals and hard materials, and to unite the cutting and grinding processes. In this study, a high speed spindle system is developed by applying the oil-air lubrication method, angular contact ball bearings, injection nozzles with dual orifices, cooling jacket and so on. And an air cooling experiment for evaluating the performance of the spindle system is carried out. Especially, in ofder to establish the air cooling conditions related to the development of a high speed spindle system, the effects of cooling air pressure, oil supply rate, air supply rate and rotational spindle speed are studied and discussed on the bearing temperature rise and frictional torque. Also the effects of cooling air pressure, rotational spindle speed and spindle system structure is investigated on the bearing temperature distribution. The experiment on the test model reveals the usefulness of the air cooling method.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.84-87
• /
• 2024

A water sterilization system is developed utilizing a 275 nm-wavelength LED light source equipped with a TIR lens. The system's light source is constructed by combining a 275 nm-wavelength UVC LED, known for its germicidal properties, with a TIR lens having a direction angle of 6.8 degrees. The optical simulation software 'LightTools' is employed to design and optimize the intensity of deep ultraviolet sterilizing light irradiation, its distribution, and sterilization capacity. In the inactivation experiment with E. coli, the water sterilizer system achieved a sterilization rate of 78.92 % while maintaining a water flow capacity of 50 L/min. Compared to the conventional mercury lamp light source water sterilizer system, the UVC LED water sterilizer system addresses environmental concerns related to mercury usage and offers advantages in terms of lifespan and durability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.74-78
• /
• 2002

Ultra-Precision CNC polishing system including on-machine measurement system, a corrective polishing algorithm is developed. The unit removal profiles for various polishing tools and analyzed and tested and dwell time distributions and residual errors for a target removal shape are calculated. The corrective polishing algorithm is tested with various workpieces. This result will be used for the software development of the CNC polishing system.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.479-486
• /
• 2010

Automobile-related industries have been a few of leading ones among domestic industries reporting high rates of musculoskeletal disorders (WMSD's). In this paper, major ergonomic aspects of automobile-related works were reviewed with reference to WMSD's. According to the result, high repeatability of works with as short as 1 minute or less, awkward postures required, excessive forces, and vibrations due to power tools were drawn out as major physical factors. To eliminate or mitigate those factors - at least in automobile-related industries - ergonomic approach has tried for more than a decade. With all, however, ergonomists still seem to confront with several problems to be solved such as development of appropriate assessment tools, enhancement of work improvement activities, system establishment for continuous prevention and management of WMSD's. As lots of previous researches declared, it was concluded that ergonomic approach would collaborate with other approaches such as ndustrial medicine considering physical factors as well as psychosocial factors, and that the necessity of an integrated Occupational Safety and Health Management System(OHSMS) was mentioned.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.236-244
• /
• 2014

Presented in the paper is a reservation based dispatching rule to achieve the on-time delivery in system LSI (large scale integrated circuit) semiconductor fabrication (FAB) with urgent orders. Using the proposed reservation based dispatching rule, urgent lots can be processed without waiting in a queue. It is possible to achieve the on-time delivery of urgent orders by reserving a proper tool for the next step in advance while urgent lots are being processed at the previous step. It can cause, however, tardiness of normal lots, because the proposed rule assign urgent lots first. To solve this problem, the proposed rule tries to find the best tool for the reservation in the tool group, which can minimize idle time, and the reservation rule is applied at all tools except for photolithography tools (bottleneck). $MOZART^{(R)}$ which is developed by VMS solutions are used for simulation experiments. The experimentation results show that the reservation based dispatching rule can achieve the on-time delivery of normal lots as well as urgent lots.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.93-99
• /
• 1998

Although laser interferometer measurement system has advantages of measurement range and accuracy, it has some disadvantages when measurement of multi degrees of freedom of motion are required. Because the traditional error measurement methods for geometric errors (two straightness and three angular errors) of a slide of machine tools measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric errors of a moving rigid body in real time processes, an on-line error measurement system for simultaneous detection of the five error components of a moving object is required. Using laser alignment technique and some optoelectronic components, an on-line measurement system with 5 degrees of freedom was developed for the geometric error detection in this study Performance verification of the system has been performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a slide of machine tools.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.247-252
• /
• 2008

Systems architecture of information models for construction industry is introduced. The architecture ful fills international standards, such as ISO 10303(STEP) and IAI IFC, etc. It is defined in web service description language(WSDL) and ISO 10303-11(EXPRESS) language. A standard platform for this standard architecture is also developed. This platform has several tools which can transform EXPRESS description file into C++ or Java languages and which also can generate an IDL file or OWL file from an EXPRESS file. System architects, software engineers, information system consultants can use these standards to define their information model for construction industry in standardized way. Construction engineers can test this information model with ease using standard testing tools and testing method, which is also a part of standard architecture of information systems for virtual construction.