• International Journal of Reliability and Applications
• /
• v.8 no.1
• /
• pp.67-82
• /
• 2007

This paper deals with the effectiveness analysis of an engineering system, which has two units of different strengths in parallel and one unit as a cold standby unit. Failure times for all the units have negative exponential distribution whereas their repair times have general distribution. Single server caters the need for the system. The effectiveness analysis of the system is done by using regenerative point technique. The different measures of effectiveness such as mean sojourn time, mean time to system failure, availability, busy period, etc, are derived. Cost factors also taken into consideration.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.67-72
• /
• 1997

To evaluate the effectiveness of water treatment using nanofiltration, ultrafiltration, and microfiltration systems, tapwater contaminated by bacteria and nitrate nitrogen was filtered, and then the rates of removal for many kinds of contaminants were comp.ared and investigated. The rates of turbidity removal by these systems are around 80% all of them. However, nanofiltration system is the most effective as hardness removal is 80%, suspended solids 90%, total residual chlorine 90% and nitrate nitrogen 69%. Among nanofiltration, ultrafiltration and microfiltration systems, nanofiltration system is the most stable in flow rate of permeate. Comparing hollow and spiral type of ultrafiltration, microfiltration each, spiral type is more stable than hollow type owing to rinsing effect of brine. The values of pH in ultrafiltration and microfiltration systems are between 7, 0 and 7.5, and that of nanofiltration system is low to 6.2-7.0. The effectiveness of heterotrophic bacteria removal is the most excellent in the nanofiltration system.

• Ocean Systems Engineering
• /
• v.5 no.3
• /
• pp.161-179
• /
• 2015

An emergency response system (ERS) for vessel oil spills is a complex and dynamic system comprising a number of subsystems and activities. Failures may occur during the emergency response operations, this has negative impacts on the effectiveness of the ERS. Of the classes of problems in analyzing failures, the lack of quantitative data is fundamental. In fact, most of the empirical data collected via questionnaire survey is subjective in nature and is inevitably associated with uncertainties caused by the human being's inability to provide complete judgement. In addition, incomplete information and/or vagueness of the meaning about the failures add difficulties in evaluating the effectiveness of the system. Therefore this paper proposes a framework to evaluate the ERS effectiveness by using the combination of fuzzy reasoning and evidential synthesis approaches. Based on analyzing the procedure of ERS for oil spills, the failures in the system could be identified, using Analytic Hierarchy Process(AHP)to determine the relative weight of identified failures. Fuzzy reasoning combined with evidential synthesis is applied to evaluate the effectiveness of ERS for oil spills under uncertainties last. The proposed method is capable of dealing with uncertainties in data including ignorance and vagueness which traditional methods cannot effectively handle. A case study is used to illustrate the application of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1312-1319
• /
• 2022

This paper defines an effectiveness index for optical continuous observation of unknown space objects and presents a range of design variables combinations that can satisfy the effectiveness index from a telescope/mount control system perspective using integrated simulation. The overall system-level simulation was implemented and the tracking performance was analyzed by considering design variables such as target position prediction and frame rate, image processing time and measurement error, target trajectory characteristics, and maneuver performance of mount gimbal. As a result of the analysis, it was confirmed that the continuous tracking performance of the optical observation system is dependent on the combination of frame rate and mount maneuver performance. In a situation where an optical observation system is designed or a similar system is implemented using COTS, an appropriate combination of parameters between design variables can be found through effectiveness analysis simulation as in this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.935-940
• /
• 2016

Directed energy weapon enables to radiate the concentrated energy so as to result in distraction and overload of the target electronics. Analysis on effectiveness of weapon system can be important consideration in order to determine performance and design weapon system. In this paper, air defense weapon system, which is one of directed energy weapon system is studied. In order to analyze the effectiveness, the reflector antenna with high power circularly polarized horn antenna is designed, and power density in axial effective area is simulated and calculated using Friis formula. Through the study, the validity of antenna system is verified, and the effectiveness of directed energy weapon system on the target is evaluated.

• Journal of Korean Institute of Industrial Engineers
• /
• v.3 no.2
• /
• pp.73-81
• /
• 1977

Mission effectiveness, which is the probability of successfully completing the assigned mission, is introduced as an appropriate measure of effectiveness for a military system. The model of mission effectiveness is developed for a system which is required to carry out various types of a mission. Each mission type is characterized by the maximum allowable time that determines the success of a given mission type. A given type of a mission is successful if and only if (i) the system is available at the start of a mission and (ii) the system completes its mission within the maximum allowable duration of time that this given mission type specifies without any failure during this period. Both analytic and simulation approaches are employed. Difficulties involved in the anayticl approach are discussed. The model is proposed as a useful tool for consistent system evaluation and optimum test design.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.388-395
• /
• 2005

This paper presents cost-effectiveness evaluation of semi-active control system for cable-stayed bridge under earthquake excitation. Bi-state control method with Linear Quadratic Gaussian(LQG) optimal controller is used for generic semi-active dampers. Cost-effectiveness of the structural control system is investigated by using the life-cycle cost(LCC) concept. The evaluation results show that the efficiency of semi-active control system is increased when the damage cost due to the failure of bridge system or the bridge importance is enlarged. It was also found that the damper cost had little influence on the cost-effectiveness of semi-active control system if it was relatively small to the initial construction cost.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.704-713
• /
• 2018

The purpose of this study is to develop a systematic framework that can scientifically and quantitatively evaluate the effectiveness of an LVC training system. The proposed framework is based on QFD(Quality Function Development) methodology. The process of developing the framework begins with identifying various needs of stakeholders related to the introduction of the LVC training system. Then the effectiveness areas and factors are derived based on the needs. The measured effectiveness for each factors on alternatives by L, V, C systems are finally synthesized into the one overall effectiveness of each training system for relative comparison among them. In addition, we developed an Excel$^{TM}$-based tool based on the proposed framework methodology to provide an ease-of-use environment for rapid evaluation on the effectiveness of each training system with the given stakeholder need importance combinations, training scenarios and assets. The suggested framework and the measurement tool are expected to be useful for efficient knowledge-based decision making on an acquisition of the LVC training system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.4 s.44
• /
• pp.43-54
• /
• 2005

This paper presents cost-effectiveness evaluation of semi-active control system for cable-stayed bridge under earthquake excitations with various magnitudes and frequency contents. Semi-active control system, which is operated by using Bi-stale control method on the basis of linear quadratic Gaussian (LQG) optimal controller, is designed for the benchmark control problem proposed by Dyke et at. The cost-effectiveness of the proposed control system is defined by the ratio of life-cycle costs between a bridge structure with shock transmission units and a bridge structure with the semi-active control devices. The simulated results show that the damper cost has little influence on the cost-effectiveness of the semi-active control system while the cost-effectiveness is quite sensitive to the damage cost induced by the bridge failure. It is also found that the semi-active control system guarantees relatively high cost-effectiveness for the cable-stayed bridge subject to the ground motions in the regions of moderate seismicity with soft soil condition and strong seismicity with stiff soil condition.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.137-144
• /
• 2016

This paper proposes characteristics of management system for defense system development. This research shows how effectiveness of SBA (simulation-based acquisition) can be represented even necessity of SBA is recognized by researchers. To achieve this goal there are two key information, (1)the cost for modeling and simulation and (2) number of trial and error of a certain step in a phase. This paper presents user interface of gathering those two key information and a way of showing the effectiveness of SBA using those two information. In this work, all the data gathering for calculation of effectiveness should be considered as a saving logs. The contribution of this research is in presenting quantitative value representing effectiveness of SBA and proposing a system architecture for deriving the quantitative effectiveness.