• Journal of Astronomy and Space Sciences
• /
• v.33 no.1
• /
• pp.55-62
• /
• 2016

Heumgyeonggaknu (欽敬閣漏) is powered by a water-hammering-type water wheel. The technique that maintains the constant speed of the water wheel is assumed to be the one used in the Cheonhyeong (天衡) apparatus in Shui Yun Yi Xiang Tai (水運儀象臺) made by the Northern Song (北宋) dynasty in the 11^th century. We investigated the history of the development and characteristics of the Cheonhyeong apparatus, and we analyzed ways to transmit the power of Heumgyeonggaknu. In addition, we carried out a conceptual design to systematically examine the power control system. Based on the conceptual design, we built a model for a water wheel control system that could be used in experiments by drawing a 3D model and a basic design.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.181-184
• /
• 1997

This paper propose the systematic procedure of the fuzzy model based controller for the continuous nonlinear system. Fuzzy controller have been successfully applied to many uncertain and complex industrial plants. The design of the fuzzy controller mainly depends on the knowledge from the expert who are familiar with the plant by trial and error. Therefore we need more systematic approach to the design of the fuzzy controller. In this paper, we design fuzzy model based controller applied to the nonlinear system. Unlike the design procedures reported in[8] and[9], we use the nonlinear process directly in designing the controller. This controller has been successfully applied to an inverted pendulum.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.66-73
• /
• 2002

The purpose of this study is to propose a new process model for architects and suppliers in AEC(Architectural, Engineering and Construction) industry, which comes from its utilization of a distributed database. Information used by participants of this process is not held in one singular application sewer, but in tile databases of multiple participants. This study addresses the problem of coping with dynamic information changes that architects face when designing with increasingly time-sensitive product information from multiple suppliers. It also describes the new distributed architecture for design representation, and outlines a corresponding process model to address the needs architectural designers during design and procurement phases. The feasibility of the process was tested in a prototype system that combines existing technologies, which allows for an objects transfer from the Web to the CAD application.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.7-12
• /
• 2008

In the design of modem rotating machinery, it is often necessary to increase the performance of rotor-bearing system. Since a critical speed range influences the performance and safety of the whole system, it should be necessary to constrain the critical speed and thus resonance response in design process to result in large vibration. Consequently the minimization of resonance response amplitudes within the operation range of the rotor system becomes the most primary design objective. In this paper, based on the assumption that the external shape of rotating-shaft, bearing supporting positions and etc, the natural frequency analysis of spindle is performed by ANSYS $10.0^{(R)}$ Optimum design is conducted using the RBF model.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.1
• /
• pp.39-50
• /
• 1988

The warehousing of inventories is an enormous expense to industries worldwide, and yet there are few available that can be used to design rack storage systems while considering overall system costs. The primary objective of this paper is the development of an overall ware hous storage system costs model to aid a warehous planner in the design of automated warehouse systems. A simulation model and statistical estimation procedures are used to determine the maximum inventory levels accumulated in the receiving, storage, and shipping areas. The overall cost model is developed to determine the required total land, the initial investment fund, the number of pieces of handling equipment, and the storage rack configuration for the main storage area. A numerical example is then presented to demonstrate the application of the overall system cost model developed in this paper.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.963-966
• /
• 2002

This paper presents a new generic Petri net model for design and performance evaluation of a flexible assembly system with dual kanban. The architectural design of the model is derived from a generic bill of materials and the combination of FMS and FAS concepts. Two approaches for analysis and performance evaluation of the new model base on the theory of invariant analysis and linear programming are also introduced. Finally, the effect of different processing times between FMS-FAS on the number of kanban cards is investigated.

• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.17-28
• /
• 2009

PEB system is more economical when compared with structures commonly used Hot rolled and welded light H-beam was introduced in the Standard Livestock Housing. This study suggested more economical technology for structural design by the reduction of live load, relief of deflection limit and reduction of importance factor. And, when applying wind Load as a result of examination with Low Rise Building Systems Manual considering open model, we can know that when the wind load is big, enclosed model is more stable than open model. In short, Suggesting more economical model and providing the method to reduce natural disaster, by the application of PEB system and the development of technology for structural design, are considered to strengthen the competitive power of farmhouse.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.163-174
• /
• 1997

Development of control model and system for AMS (Automated Manufacturing Systems) has long been interested by researchers. Presented in the paper is a systematic approach to constructing a Petri-nets(PNs) model of AMS and method for design a graphical model of a AMS by using a new modeling tool which is called PNs. So, the procedure of modeling in the AMS is the same as current practice of AMS design and is based on the IOM (Integrated Object-oriented Modeling) paradigm. An AMS, which consists of various machine groups, can produce machine parts in different physical dimensions and lot size. To model such a system, the method which utilizes Sub-PNs are proposed. This enables the models according to part routings. The machine group which causes bottleneck is obtained and modified to relieve the problem. By iterating these steps which consist of modelling, simulation, and performance evaluation, an AMS can e obtained which satisfies the required manufacturing conditions. Finally, the implementation issues of PN modeling are addressed. The approach is the IOM from PN modeling by Sub-PNs and the other is a development of IOM tool for the performance evaluation of AMS.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.316-323
• /
• 2014

This paper proposes the 3D modeling and simulation technique for predicting the integrated performance of combat vehicle. To consider the practical driving and firing condition of a combat vehicle, the full vehicle model, which can define the six degrees-of-freedom of vehicle motion and various firing angles, is developed. The critical design parameters such as the stiffness and damping coefficient of suspension system are applied to construct the analysis model of vehicle. A simple ballistic model, which incorporates the empirical interior ballistic model and the point mass trajectory model, is built to estimate the firing range and the firing recoil force. To predict the integrated performance and analyze the effect of system parameters, MATLAB/SIM-ULINK model of a combat vehicle for performing the real time simulation is also developed. Several simulation tests incorporating the road bump and the firing recoil force are presented to confirm the effectiveness of the proposed vehicle model.

• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.372-378
• /
• 2015

In labor-intensive enterprise, such as garment factory, assembly line is widely used as a manufacturing process for reducing costs and production time. However, for the sake of the various working capacity of worker, idle or delay may happen and influence the rear processes. If these unforeseeable delay happened continuously, it may influence the whole manufacturing process and a model, which is called limited-cycle model with multiple periods (LCMwMP), is assumed to evaluate the influence risk. In order to minimize the risk, the assignment of the workers is focused on. In this paper, we deal with an assembly line as LCMwMP model when two kinds of workers exist, whose efficiency is assumed to two different groups. We consider an optimization problem for finding an assignment of workers to the line that minimizes total expected risk, which is exchanged to expected cost by reset model of LCMwMP. First, reset model as a simple model of LCMwMP is introduced. Then, some hypotheses of the rules of the optimal worker assignment are proposed and some numerical experiments are researched assuming the processing time as Erlang distribution. Finally, the other rules on other certain conditions are discussed.