• 한국국방경영분석학회지
• /
• 제36권3호
• /
• pp.57-68
• /
• 2010

이 연구는 복합시스템 구축과 소요제기 결정에 활용하기 위하여 복합시스템 엔지니어링과 아키텍처 방법론으로 개발한 복합시스템 개념설계 모형을 제시하고 있으며, 모형의 검증은 Process Transition Map, 전문가 설문기법으로 수행하였다. 또한 미래 전력발전에 활용할 수 있도록 종합전투실험체계에 대한 개념설계를 프로세스 단계별 산출물을 작성하여 제시하였다.

• 한국항해항만학회지
• /
• 제30권2호
• /
• pp.145-150
• /
• 2006

Recently we have seen a noticeable trend in ports to establish port clusters. Despite this trend, little research has actually been undertaken to fully define and analyse port clusters. A couple of exceptions have descriptively defined port clusters but the boundaries of port clusters are not apparent. Therefore, the aim of this paper is to define port clusters in terms of set theory and in particular look at them in terms of their distinct characteristics and system boundaries. The main concern of this paper is that there is a need to distinguish, from a system and a competition perspective, between port clusters, ports, maritime clusters and port ranges. This paper proposes a conceptual model relevant to the relationship among port clusters related assemblages and that has been applied to the north western europe region This model suggests six levels of competition that will help port authorities and government to develop appropriate policies and strategies for port operation and port industry.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2743-2759
• /
• 2020

A detailed computational fluid dynamics (CFD) simulation analysis model was developed using ANSYS CFX 16.1 and analyzed to simulate the basic design and internal flow characteristics of a 180 MW small modular reactor (SMR) with a natural circulation flow system. To analyze the natural circulation phenomena without a pump for the initial flow generation inside the reactor, the flow characteristics were evaluated for each output assuming various initial powers relative to the critical condition. The eddy phenomenon and the flow imbalance phenomenon at each output were confirmed, and a flow leveling structure under the core was proposed for an optimization of the internal natural circulation flow. In the steady-state analysis, the temperature distribution and heat transfer speed at each position considering an increase in the output power of the core were calculated, and the conceptual design of the SMR had a sufficient thermal margin (31.4 K). A transient model with the output ranging from 0% to 100% was analyzed, and the obtained values were close to the T_hot and T_cold temperature difference value estimated in the conceptual design of the SMR. The K-factor was calculated from the flow analysis data of the CFX model and applied to an analysis model in RELAP5/MOD3.3, the optimal analysis system code for nuclear power plants. The CFX analysis results and RELAP analysis results were evaluated in terms of the internal flow characteristics per core output. The two codes, which model the same nuclear power plant, have different flow analysis schemes but can be used complementarily. In particular, it will be useful to carry out detailed studies of the timing of the steam generator intervention when an SMR is activated. The thermal and hydraulic characteristics of the models that applied porous media to the core & steam generators and the models that embodied the entire detail shape were compared and analyzed. Although there were differences in the ability to analyze detailed flow characteristics at some low powers, it was confirmed that there was no significant difference in the thermal hydraulic characteristics' analysis of the SMR system's conceptual design.

• Asia pacific journal of information systems
• /
• 제6권1호
• /
• pp.241-267
• /
• 1996

The problems like exceeding estimated cost, late due-date, expensive maintenance, insuffiency of experts and low productivity are becoming emphasized related with the software development. In order to overcome these problems and to develop the highly qualified software within the limited resources, a project management tool is used. The purpose of this study is to develop a conceptual model of the project management system which can plan, analyze and control the software development projects effectively. The model is constructed with plan and track management system, cost management system and operation management system for the efficient project management. It is named by LSD-PMS : Large-scale Software Development Project Management System. We reviewed 5 cases of project management. LSD-PMS is evaluated and reviewed by the project managers in the field. It is proved that LSD-PMS is a tool which can help project managers develop software successfully given budget and time schedule. In the future, this system should be further developed as an integrated model with system implementation tools such as CASE products.

• 시스템엔지니어링학술지
• /
• 제20권spc1호
• /
• pp.97-107
• /
• 2024

Efforts to respond to climate change are being made in various ways around the world, and in the energy field, continuous research and pilot projects are underway through new and renewable energy, efficient power grid management, and power grid services. Systems are in place to realize these efforts, and the systems created allow for better effectiveness. When implementing a system, systems engineering methodology helps design a more systematic system and can provide verification accuracy and uniformity through intuitive connectivity. In this paper, the original requirements of the power grid stabilization system and the architecture of the system's essential constraints are constructed as a conceptual model and the boundaries and flows between components are defined. By utilizing distributed resources such as EV(Electric Vehicle) and ESS(Energy Storage System) in the power service platform system, we plan to design and build a next-generation power service system that can participate in the power stabilization market and implement a system necessary to respond to climate change in the future.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.568-580
• /
• 2020

Calibrating a conceptual hydrologic model necessitates selection of a calibration period that produces the most reliable prediction. This often must be chosen randomly, however, since there is no objective guidance. Observation plays the most important role in the calibration or uncertainty evaluation of hydrologic models, in which the key factors are the length of the data and the hydro-climate conditions in which they were collected. In this study, we investigated the effect of the calibration period selected on the predictive performance and uncertainty of a model. After classifying the inflows of the Hapcheon Dam from 1991 to 2019 into four hydro-climate conditions (dry, wet, normal, and mixed), a conceptual hydrologic partitioning model was calibrated using data from the same hydro-climate condition. Then, predictive performance and post-parameter statistics were analyzed during the verification period under various hydro-climate conditions. The results of the study were as follows: 1) Hydro-climate conditions during the calibration period have a significant effect on model performance and uncertainty, 2) calibration of a hydrologic model using data in dry hydro-climate conditions is most advantageous in securing model performance for arbitrary hydro-climate conditions, and 3) the dry calibration can lead to more reliable model results.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.21-29
• /
• 2014

일반적으로 시뮬레이션 프로젝트는 목적에 부합되는 수준에서 연구 대상 시스템과 유사하게 작동되는 모델을 개발해야 하기 때문에 시간과 비용이 많이 소요된다. 따라서 적절한 개념 모델 설계와 이를 바탕으로 시뮬레이션 모델을 자동 생성하여 모델 개발 과정의 시행착오를 최소화함으로써 모델링 시간을 단축하기 위한 연구가 요구되고 있다. 본 논문에서는 실무에서 많이 사용되고 있는 Microsoft Excel과 Visio를 활용하여 개념 모델을 개발하고 이를 Arena 모델로 자동으로 변환하는 툴을 제안하였다. 예제를 이용하여 본 논문의 모델 자동 생성 툴의 효용성을 보였다.

• 한국산업정보학회논문지
• /
• 제4권3호
• /
• pp.59-70
• /
• 1999

정보시스템의 성과변수로서 사용자만족을 측정하고자 하는 연구가 많이 수행되어졌으나 사용자만족의 개념정의, 변수, 측정방법 등의 상이함으로 인해 이론적 검증이 명확하게 이루어지지 않고 있는 실정이다. 본 연구는 측정에서의 차이발생의 원인을 규명하고 개념적 모형을 제시하는 것을 목적으로 수행되어졌다. 연구는 다음과 같이 진행되어졌다. 첫째, 심도 깊은 선행연구 분석을 통해 각 연구의 개념, 측정방법, 한계점을 제시하였다. 둘째, 선행연구에 대한 시사점을 토의하였다. 셋째, 시사점에 토대를 두고 개념적 모형을 제시하였는데, 모형의 특징은 영향요인들을 독립변수로서, 측정요인들을 종속변수로서 명확히 분리하여 각 변수간의 명시적 상관관계를 분석하고, 영향요인들 중 관련성을 갖는 요인을 채택하여 요인들간의 상관관계, 상대적 중요도, 상호작용효과를 분석할 수 있는 데 있다.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2007년도 추계학술대회
• /
• pp.377-382
• /
• 2007

To transform the enterprise system into the 'Real Time Enterprise' with respect to IT, I suggest the conceptual application model which is composed of pieces(components) extracted from different packaged applications working in a heterogeneous environment based on the 'business activity' in other words, business services provided by internal (inter-enterprise) and external (extended enterprise) application to support a business activity within in an enterprise and the design mechanism focusing service tier which acts as intermediate tier within application architecture.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.33-42
• /
• 2012

This paper dealt with developing conceptual model for making public policy on consumer product safety. The matters of consumer safety, public health and environmental protection are essential parts of making policy for consumer products. Moreover, policy authority should consider all measures based on consumer safety. In the process making regulations, policy authority has to have some methods to prevent errors on treating eligible persons as persons disqualified under uncertainty decision making of public policy. To recognize and ensure fairness on public policy, policy authority needs to establish basic policy making and fundamental concepts. Therefore, we developed conceptual model for consumer products safety, CPSPcon in this paper. The conceptual model is one part of SSM(Soft System Methodology) and can support specific policy target. The CPSPcon model can assist in evaluation of responses to an adapting or considering model.