• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2003

A new code, LS code, was proposed for the IMT-2000 CDMA system. The code has special properties during a specific time interval: 1) perfect autocorrelation, and 2) perfect crosscorrelation. Perfect autocorrelation means maximum autocorrelation for zero time-offset and zero autocorrelation for all other times during a specific time interval. Moreover, perfect crosscorrelation means that the crosscorrelation has zero value during a certain time, you can remove all the MAI within that time. However, the detailed properties of LS code and its exact generation method have been previously unknown. Therefore, we investigate the LS code in regards to its exact generating method, properties, and performances in this paper.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.425-428
• /
• 1999

Turbo decoder were shown to achieve performance within 0.7㏈ of the Shannon capacity limit. This constituted a significant gain in power efficiency over other coding techniques known at the time. In this paper, Turbo code with constraint length K＝4, code rate 1/3, frame size 196bits(6 tail bits), 20㎳ frame and 6bit MAP decoder is implemented using VHDL. The designed Turbo code is used for voice service. Interactions of the system are used to attain large performance improvements.

• Proceedings of The KACE
• /
• 2018.08a
• /
• pp.155-158
• /
• 2018

수출입 기업이 관세 혜택을 받거나 올바른 관세를 측정하기 위해서는 통관 진행 시 올바른 품목 분류가 선행되어야 한다. 그러나 품목 분류의 기준이 1만개가 넘을 정도로 방대하여 신규 사용자나 품목에 이해가 부족할 경우 분류에 어려움이 따른다. 이러한 HS Code 분류의 한계점을 보완하기 위해 빅데이터 기반 이미지 분석을 통한 자동 제안 시스템을 목표로 하였다. 본 논문에서는 이미지 분석을 통한 HS Code 자동 제안시스템을 위한 수출입 품목 중 의류 품목의 수출입 품목에 국한하여 의류 HS Code 자동 분류 시스템을 설계하고, 제안한다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.10a
• /
• pp.15-18
• /
• 1984

The majority - logic decoding algorithm for Geometry code is more simply imlemented than the known decoding algorithm for BCH codes. Thus, the moderate code word, Geometry codes provide rather effective error control. The purpose of this paper is to investigate the Reed - Muller code and to design the encoder and decoder circuit and to find the performance for (15, 11) Reed - muller code. Experimental results show that the system has not only single error - correcting ability but also good performance.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.423-434
• /
• 2016

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.431-442
• /
• 2018

2-dimensional barcode, QR code has been used for containing various information such as image, video, map, and business cards. Currently, a smartphone is used as a QR code scanner, displaying the code and converting it to a standard URL for a website. However, QR codes are not very common in encrypted application and so have a few applications. This paper proposes a new color-code, which integrates the conventional QR code and color design, and can be effectively used in some product certification system. The proposed method exploits the fact that genuine code is produced by CMYK color model, but the counterfeit is captured by RGB color model and during this process, color information of the code is changed. This paper introduces the color matrix model to measure the distortion between genuine code and counterfeit code. By investigating the statistical characteristics of color matrix, an effective detection of print image forgeries are designed. Various experiments with color codes show that the proposed system can be effectively used in product certification systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.731-741
• /
• 2009

Optical repeater is often installed at the isolated area. Spatial separation makes it possible to reduce the inter-code interference when secondary scrambling codes are used for traffic connected through repeater. In this paper, we propose five secondary scrambling code usage scenarios with the aids of optical repeater to maximize the user capacity. In order to evaluate the performance, dynamic system level simulation is performed. We also propose a base station-repeater switching where each active users can change access points by comparing the channel condition from base station and repeater thorough secondary common pilot channel (S-CPICH) signal to noise-interference ratio (SINR). Moreover, primary-secondary scramble code replacing scheme is proposed which replaces secondary scramble code with primary scramble code when a call using primary scramble code is ended and its corresponding OVSF code is available to users using the secondary scramble code

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1672-1677
• /
• 2015

The multi-level holographic storage system can store more than one bit per pixel. In this paper, we introduce a 6-pixel 4-level modulation code and compare with 4-level 6/9 modulation code and 2/3 modulation code. The proposed 6-pixel modulation code has the minimum Euclidean distance 3. The 6-pixel modulation code is approximately 1dB better than the other modulation codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.967-975
• /
• 1998

This paper presents a system to cancel the multi-user interference of synchronous DS/CDMA systems by using the estimation circuit and the reference correlator. In the code-division multiple access(CDMA) scheme, the spectrum of the user's signal is directly spreaded by means of the Simplex coed or the phase offsetted PN code. It is interesting for the Simplex code and the PN code to have a similar correalation property. It these codes are used in DS/CDMA systems, the number of acceptable users can be increased in comparison with conventioal DS/CDMA systems. This thesis presents a interference cancellation model to cancel the multi-use interference in DS/CDMA systems by using Simples code of PN code as a spreading sequence. In AWGN environment, we analyze interference generated from other users and compare the resulting performance with that of the conventioanl receiver in same user side.

• Nuclear Engineering and Technology
• /
• v.37 no.6
• /
• pp.587-594
• /
• 2005

In an effort to develop a thermal-hydraulic (TH) safety analysis code for Gas-cooled Reactors (GCRs), the MARS code, which was primarily developed for TH analysis of water reactor systems, has been extended here for application to GCRs. The modeling requirements of the system code were derived from a review of major processes and phenomena that are expected to occur during normal and accident conditions of GCRs. Models fur code improvement were then identified through a review of existing MARS code capability. Among these, the following priority models necessary fur the analysis of limiting high and low pressure conduction cooling events were evaluated and incorporated in MARS-GCR/V1 : 1) Helium (He) and Carbon Dioxide ($CO_2$) as main system fluids, 2) gas convection heat transfer, 3) radiation heat transfer, and 4) contact heat transfer models. Each model has been assessed using various conceptual problems for code-to-code benchmarks and it was demonstrated that MARS-GCR/V1 is capable of capturing the relevant phenomena. This paper describes the models implemented in MARS-GCR/V1 and their verification and validation results.