• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.141-145
• /
• 2009

A C-to-SystemC synthesizer which processes the input behavior according to high-level synthesis, and then transforms the synthesis result into SystemC module code is implemented in this paper. In the synthesis process, the input behavioral description in C source code is scheduled using list scheduling algorithm and register allocation is performed using left-edge algorithm on the result of scheduling. In the SystemC process, the output from high-level synthesis process is transformed into SystemC module code by combining it with SystemC features such as channels and ports. The operation of the implemented C-to-SystemC synthesizer is validated through simulating the synthesis of elliptic wave filter in SystemC code. C-to-SystemC synthesizer can be used as a part of tool-chain which helps to implement SystemC design methodology covering from modeling to synthesis.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.514-520
• /
• 1989

The early hydration characteristics according to the C3S/C3A ratio and presence of gypsum, in order to establish the hydration mechanism of the system C3S-C3A, have been studied. The rate of C3S dissolution in the system C3S-Gypsum was higher than that in the system C3S. Consequently, the induction period was reduced and the rate of Ca(OH)2 formation in the accleration period was increased. The hydration of C3S in the system C3S-C3A was retarded because Al3+ in the liquid phase originating from the hydration of C3A was incorporated into calcium hydrosilicates formed. The retardation phenomenon of C3S hydration was not appeared in the system C3S-C3A-gypsum because the reaction of monosulfate formation became the rate-determining step.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2016

In this paper, we propose a hybrid multi.system-on-chip (H-MSoC) architecture that provides a high-flexibility system in a rapid development time. The H-MSoC approach provides a flexible system-on-chip (SoC) architecture that is easy to configure for physical- and application-layer development. The physical- and application-layer aspects are dynamically designed and modified; hence, it is important to consider a design methodology that supports rapid SoC development. Physical layer development refers to intellectual property cores or other modular hardware (HW) development, while application layer development refers to user interface or application software (SW) development. H-MSoC is built from multi-SoC architectures in which each SoC is localized and specified based on its development focus, either physical or application (hybrid). Physical HW development SoC is referred to as physical-SoC (Phy-SoC) and application SW development SoC is referred to as application-SoC (App-SoC). Phy-SoC and App-SoC are connected to each other via Ethernet. Ethernet was chosen because of its flexibility, high speed, and easy configuration. For prototyping, we used a LEON3 SoC as the Phy-SoC and a ZYNQ-7000 SoC as the App-SoC. The proposed design was proven in real-time tests and achieved good performance.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.123-126
• /
• 1996

In this paper, optimal modulation controller is designed to improve the stability of A.C. and A.C.-D.C. power system, and optimal theory is applied to select optimal modulation controller input signal Optimal modulation controller for speed governor and exciter controller system is constructed in A.C. power system, while the controller is constructed to the both control systems like AC. power system, considering ACR-AVR, APR-$A{\gamma}R$ as the control method of direct current system. It is considered that the stability of A.C. power system only and A.C.-D.C. power system against load fluctuations and disturbances under case of optimal modulation control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.81-87
• /
• 2008

C-Hook is a kind of conveyer system for transporting steel coil in POSCO. To detect the current position and the trajectory of steel coils in a plant, C-Hooks are tracked by an inspection system based on PLC. The inspection system detects transit of C-Hooks by monitoring a physical contact between steel bars on a C-Hook and the inspection sensors. However, this system is not reliable because of the abrasion, damage and aging. Moreover, the number of distinguishable C-Hooks is limited by the number of combination of steel bars on a C-Hook. It means that more steel bars should be installed for distinguishing the more C-Hooks. Therefore, the conventional system is difficult and expensive to maintain. To overcome these problems, we propose a C-Hook identification system that uses RFID which is a non-contact type identification system, and evaluate its performance and applicability from a new monitoring program that operates along with the conventional system in the real environment of POSCO.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.313-316
• /
• 2001

In this paper we present the design of a JPEG Encoder using SystemC Methodology Our methodology supports the efficient mapping of C/C++ functional descriptions directly into hardware. The use of C/C++ to model al1 parts of the system provides great flexibility and enables faster simulation compared to existing methodologies. The designer can estimate system performance and verify functional correctness of the designs using commonly available software compilers. A design flow in SystemC begins with an untimed description in C++, using a library of new data types useful for modeling hardware. The description can be compiled and simulated for functional correctness. Then, the design may be refined by adding interface specification and timing information, and again the timed description can be compiled with a standard C++ compiler, simulated, and debugged.

• The Korean Journal of Pain
• /
• v.37 no.2
• /
• pp.91-106
• /
• 2024

The mechanisms of the chronic pain and depression comorbidity have gained significant attention in recent years. The complement system, widely involved in central nervous system diseases and mediating non-specific immune mechanisms in the body, remains incompletely understood in its involvement in the comorbidity mechanisms of chronic pain and depression. This review aims to consolidate the findings from recent studies on the complement system in chronic pain and depression, proposing that it may serve as a promising shared therapeutic target for both conditions. Complement proteins C1q, C3, C5, as well as their cleavage products C3a and C5a, along with the associated receptors C3aR, CR3, and C5aR, are believed to have significant implications in the comorbid mechanism. The primary potential mechanisms encompass the involvement of the complement cascade C1q/C3-CR3 in the activation of microglia and synaptic pruning in the amygdala and hippocampus, the role of complement cascade C3/C3a-C3aR in the interaction between astrocytes and microglia, leading to synaptic pruning, and the C3a-C3aR axis and C5a-C5aR axis to trigger inflammation within the central nervous system. We focus on studies on the role of the complement system in the comorbid mechanisms of chronic pain and depression.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.195-207
• /
• 1999

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing. The steps of developing the C&C system are as follows: 1) analysis of existing coding system and drawing type; 2) design of C&C system; 3) practice of designed coding system to a field.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1177-1180
• /
• 2003

Recently, SystemC is one among the language observed. In Industry, there are many the languages that use Verilog. But, unskillful SystemC users must learn SystemC for conversion that from Verilog to SystemC and need time and effort for this. By these reason, feel necessity of easy and efficient conversion. This paper argues efficient methodology to change Verilog to SystemC. Abstract concepts of Verilog are proposed fittingly each one by one in SystemC.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.109-112
• /
• 2001

In this paper, I present a MPEG4 decoding system modeling in SystemC, a new C/C++ based system simulation approach, In the modeling, MPEG4 decoding behavior is modeled and verified. And I partitions the MPEG4 decoding system into several hardware components which will be implemented at low level hardware design flow and I model a synchronized hardware block communication through data ports.