• 한국수자원학회논문집
• /
• 제46권5호
• /
• pp.547-558
• /
• 2013

설계홍수량 산정 시 일반적으로 활용하는 합성단위도법에 대한 개선안을 제시하였다. 본 연구에서는 합성단위도의 형태를 결정짓는 첨두 비유량과 첨두시간의 결정을 위하여 첨두수문량과 유역의 지형공간적 형상계수간의 회귀분석을 시행한 결과, 유역의 단순 공간적 기하요소보다는 형상계수의 결정계수가 뚜렷이 높았으며, 유역의 지형특성영향을 독립적으로 검토할 경우 결정계수가 0.52~0.69에 그쳤으나, 지형특성이 조합된 형상계수를 이용하여 민감도분석을 해보면 결정계수가 0.73~0.81로 개선된 결과를 확인할 수 있었다. 일반적으로 단위도를 적용할 수 있는 적합한 유역의 면적은 대략 500~700 $km^2$이라 볼 때, 이러한 영역에서 유역유출모의를 통한 본 연구의 합성단위도를 검증한 결과, 특이값이 발생하는 유역을 제외하고 본 연구결과의 상대오차가 1.7~29.0%(평균 11.6%)의 수준을 보여주었다. 합성단위도법 적용에 관한 기존사례(KICT, 2000)는 상대오차가 35.0~64.9%(평균 46.7%)를 보여주어 본 연구의 제안식이 기존에 비하여 개선된 결과를 보여주고 있다.

• 자원환경지질
• /
• 제53권6호
• /
• pp.793-807
• /
• 2020

그린뉴딜정책의 실현은 석탄을 연료에서 원료로 활용분야로의 전환을 촉진시킬 것이다. 석탄은 수소의 생산, 인조 흑연 및 활성탄의 제조 원료로 활용될 수 있다. 석탄은 Steam carbon(SC) 반응과 Water-Gas Shift(WGS) 반응 및 탄산화 반응을 통하여 수소를 생산할 수 있으며, CO2격리기술과 연동되어 사용되어야 한다. 인조흑연은 실리콘이나 철 등의 무기촉매의 존재하에서 탄화도가 높은 무연탄 등을 2400~2800℃의 흑연화 온도까지 열처리함으로서 제조될 수 있기 때문에 무연탄은 석유계 피치에 비해 원료 가격경쟁력 측면에서 잠재성이 있다. 한편, 최근 목질기원의 활성탄에 필적하는 넓은 비표면적 혹은 많은 양의 미세기공을 가진 석탄기원의 활성탄이 제조될 수 있음을 여러 연구를 통해 확인되었다. 따라서 석탄기원의 활성탄은 목질기원의 활성탄을 대체할 수 있을 것으로 기대된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.517-517
• /
• 2023

현재 우리나라에서는 4대강 및 주요 호소 29지점을 대상으로 조류경보제가 시행되고 있으며 조류 경보 단계는 실시간 모니터링지점에서 측정되는 유해 조류의 셀농도를 기반으로 발령 단계가 결정된다. 상수원 구간은 관심, 경계, 조류 대발생, 해제 또는 미발생 총 4구간으로 구성되며, 친수 활동 구간의 경우 조류 대발생을 제외한 3구간으로 구성된다. 현재 시행되는 조류 경보제의 목적은 유해 조류 발생 시 사후 대응 방안 마련에 보다 초점이 맞춰져 있으며 특히, 모니터링 주기 확대 여부, 오염원 관리 방안 마련, 조류 제거 여부 등의 의사 결정 수단으로 사용되고 있다. 하지만 조류 경보 단계에 대한 사전 예측이 가능한 경우 유해 조류의 성장을 억제할 수 있으며 이를 통해 안전하고 깨끗한 수자원을 확보할 수 있다. 본 연구에서는 조류 경보 단계의 사전적 예측을 위해 국가 실시간 측정망에서 제공하는 전국 보 모니터링 종합 정보 자료, 기상측정망 자료, 실시간 보 현황 자료를 활용하여 예측 모델을 구축하였다. 또한, 단계 예측의 정확도를 개선하기 위해 변수 선택 기법을 활용하여 조류 경보 단계에 영향을 미치는 환경변수를 선정하였으며 자료의 불균형으로 인해 모델 학습 과정에서 발생하는 예측 오류를 최소화하기 위해 다양한 샘플링 기법을 적용하여 모델의 성능을 평가하였다. 변수 선택 및 샘플링 기법을 고려하지 않은 원자료를 사용하여 예측 모델을 구축한 결과 관심 단계(Level-1) 및 경보 단계(Level-2)에 대해 각각 50%, 62.5%의 예측 정확도를 보인 반면 비선형 변수 선택 기법 및 Synthetic Minority Over-sampling Technique-Edited Nearrest Neighbor(SMOTE-ENN) 샘플링 기법을 적용하여 구축한 모델에서는 Level-1은 85.7%, Level-2는 75.0%의 예측 정확도를 보였다.

• 대한원격탐사학회지
• /
• 제31권4호
• /
• pp.337-346
• /
• 2015

Water body extraction based on backscatter information is an essential process to analyze floodaffected areas from Synthetic Aperture Radar (SAR) image. Water body in SAR image tends to have low backscatter values due to homogeneous surface of water, while non-water body has higher backscatter values than water body. Non-water body, however, may also have low backscatter values in high resolution SAR image such as Kompsat-5 image, depending on surface characteristic of the ground. The objective of this paper is to present a method to increase backscatter contrast between water body and non-water body and also to remove efficiently misclassified pixels beyond true water body area. We create an entropy image using a Gray Level Co-occurrence Matrix (GLCM) and classify the entropy image into water body and non-water body pixels by thresholding of the entropy image. In order to reduce the effect of threshold value, we also propose Water Body Texture Index (WBTI), which measures simultaneously the occurrence of repeated water body pixel pair and the uniformity of water body in the binary entropy image. The proposed method produced high overall accuracy of 99.00% and Kappa coefficient of 90.38% in water body extraction using Kompsat-5 image. The accuracy analysis indicates that the proposed WBTI method is less affected by the choice of threshold value and successfully maintains high overall accuracy and Kappa coefficient in wide threshold range.

• 한국토양비료학회지
• /
• 제49권1호
• /
• pp.87-92
• /
• 2016

With the population growth and industrialization, the characteristics of discharged waste water and sewage have become more diverse. The removal of phosphorus (P) in the wastewater is essential for the prevention of eutrophication in the river and stream. This study was performed in order to estimate the field application of the Bacillus sp. 3434 BRRJ. Bacillus sp. 3434 BRRJ was cultured in the raw wastewater and synthetic medium at the 5 L reactor. The best optimum conditions for P removal by Bacillus sp. 3434BRRJ in the synthetic medium at the 5 L reactor were as follows: temperature, $30^{\circ}C$; P concentration, 20 mg/L; carbon sources, glucose + acetate (1:1); oxygen concentration, alternatively anaerobic and aerobic conditions. P removal efficiency under the optimum condition was 89.4%. In case of wastewater, P removal efficiency was 95.5% under controlled at $30^{\circ}C$. Through this study we confirmed that P removal by Bacillus sp. 3434BRRJ in case of wastewater was as effective as the synthetic medium. It is considered that Bacillus sp. 3434 BRRJ can be applied to the treatment of wastewater in order to biologically remove P from the wastewater on a large scale.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.325-342
• /
• 2014

The use of lightweight aggregate (LWA) instead of ordinary aggregate may make lightweight aggregate concrete, which possesses many advantages such as lightweight, lower thermal conductivity, and better fire and seismic resistance. Recently the developments of LWA have been focused on using industrial wastes as raw materials to reduce the use of limited natural resources. In view of this, the intent of this study was to apply Taguchi optimization technique in determining process condition for producing synthetic LWA by incorporating waste thin film transition liquid crystal displays (TFT-LCD) glass powder with reservoir sediments. In the study the waste TFT-LCD glass cullet was used as an additive. It was incorporated with reservoir sediments to produce LWA. Taguchi method with an orthogonal array L16(45) and five controllable 4-level factors (i.e., cullet content, preheat temperature, preheat time, sintering temperature, and sintering time) was adopted. Then, in order to optimize the selected parameters, the analysis of variance method was used to explore the effects of the experimental factors on the performances (particle density, water absorption, bloating ratio, and loss of ignition) of the produced LWA. The results showed that it is possible to produce high performance LWA by incorporating waste TFT-LCD glass cullet with reservoir sediments. Moreover, Taguchi method is a promising approach for optimizing process condition of synthetic LWA using recycled glass cullet and reservoir sediments and it significantly reduces the number of tests.

• 약학회지
• /
• 제21권4호
• /
• pp.193-199
• /
• 1977

ABS, Alkyl benzene sulfonate, persists for long periods in stream because of its resistance to biologic degradation. Its bio-degradation is very varied in the environments. This investigation was therefore undertaken in order to know the biodegradation of synthetic detergents which are comprising soft and hard forms from February 1976 to September 1976. The biodegradations by spontaneuos settling and aeration were determined. The reduction rates of ABS, DBS, and LAS were 9.8%, 13.7% and 10.4% by the settlings for 5 days at $25^{\circ}$ and 63.3%, 27.2%, and 43.9% by aeration respectively. It was not contributed effectively to biodegradate the synthetic detergents by the simulaneous incubation with micro-organisms isolated from sewage such as Enterobacter sp., E. coli, Bacillus sp., Flavobacterium sp., Pseudomonas sp., Staphylococcus sp., and etc. Tricking filter could also eliminate some amount of detergent. By the application of this investigation, it could be designed that detergents would be regulated in abuse in context with water pollution and be treated at a proper process in the sewage treatment plant to be installed.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.38-43
• /
• 1993

The characteristics of food wastewater treatment in an anaerobic packed bed reactor (APBR) with polyurethane as a packing material and sludge bed reactor (ASBR) was studied. The reactor of 9cm-ID, 150cm-height was fed in a continuous mode from bottom of reactor. For the purpose of constant temperature of reactor, water jacket was installed. The used packing materials was polyurethane sponge foam. Methane which was produced by decomposed organics collected at the top of the reactor for using as a fuel. The substrates used were synthetic, mixed and food wastewater. For the acclimatization of microorganisms, mixed wastewater was used. The major analyses were gas production, COD, pH and volatile acids. Based upon the completed works, the results are as follows: When food wastewater was fed the quantity of produced gas was less than that of synthetic wastewater, but food process saw higher methane content than synthetic process. As well as COD removal efficiency of food process reached at about 85%. In aspect of effluent volatile acid, food process showed low concentration of below 500 mg/l, therefore anaerobic reaction stabled. Conclusively food wastewater used can be digested by anaerobic treatment, especially anaerobic packed bed reactor showed 82% of COD removal, 75% of methane content, 10 l of gas production, and anaerobic sludge bed reactor did 79% of COD removal, 75% of methane content, 81 of gas production at 4 kgCOD/m$^3$day, 36$\circ$C.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.185-194
• /
• 2016

It is essential for generating the synthetic image to test and evaluate a guided missile system in the hardware-in-the-loop simulation. In order to make the evaluation results to be more reliable, the extent of fidelity and rendering performance of the synthetic image cannot be left ignored. There are numerous challenges to simulate the LWIR sensor signature of sea surface depending on the incident angle, especially in the maritime environment. In this paper, we investigate the key factors in determining the apparent temperature of sea surface and propose the approximate formula consisting of optical characteristics of sea surface and sky radiance. We find that the greater the incident angle increases, the larger the reflectivity of sea surface, and the greater the water vapor concentration in atmosphere increases, the larger the amount of sky radiance. On the basis of this information, we generate the virtual maritime environment in LWIR region using the SE-WORKBENCH, physically based rendering software. The margin of error is under seven percentage points.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1891-1896
• /
• 2010

Submicron-sized polymeric colloidal particles can self assemble into 3-dimensional (3D) opal structure which is a useful template for photonic crystal. Narrowly dispersed polymer microspheres can be synthesized by emulsion polymerization in water using water-soluble radical initiator. In this report, we demonstrate a facile and reproducible emulsion polymerization method to prepare various polymeric microspheres within 200 - 400 nm size ranges which can be utilized as colloidal photonic crystal template. By controlling the amount of monomer and surfactant, monodisperse polymer colloids of polystyrene (PS) and acrylates with various sizes were successfully prepared without complicated synthetic procedures. Such polymer colloids self-assembled into 3D opal structure exhibiting bright colors by reflection of visible light. The colloidal particles and the resulting opal structures were rigorously characterized, and the wavelength of the structural color from the colloidal crystal was confirmed to have quantitative relationship with the size of constituting colloidal particles as predicted by Bragg equation. The tunability of the structural color was achieved not only by varying the particle size but also by infiltration of the colloidal crystal with liquids having different refractive indices.