• 한국건축시공학회지
• /
• 제18권6호
• /
• pp.577-584
• /
• 2018

본 논문은 합성수지 거푸집 성능평가를 위해 길이 변화율, 충격시험, 소음테스트를 실시하였다. 또한 현장 적용을 통해 합성수지 거푸집 시공성에 대해 검토하였다. 실험결과, 가열 길이 변화 시험, 충격시험은 KS기준치를 모두 만족하는 것으로 나타났다. 소음 테스트의 경우 유로폼이 평균 106dB(A)을 나타냈으며, 합성수지 거푸집은 평균 100.4dB(A)을 나타났다. 음압레벨의 경우, 합성수지 거푸집이 유로폼보다 고주파영역에서 낮게 나타나 시공시 소음 피로도가 적고 주변민원은 감소할 것으로 판단된다. 마지막으로 현장적용결과, 콘크리트 타설 중 거푸집 휨 현상이나 배부름 현상은 발생하지 않았다. 또한 콘크리트 표면 마감도가 합성수지 거푸집이 유로폼면 보다 더 우수한 것으로 나타났다.

• 통합자연과학논문집
• /
• 제6권2호
• /
• pp.104-110
• /
• 2013

1-Aza-12-crown-4 macrocyclic ligand was combined with styrene (2th petroleum in 4th class hazardous materials) divinylbenzene copolymer having 1%, 2%, 3%, and 6% crosslinks by a substitution reaction, in order to synthesize resin. These synthetic resins were confirmed by chlorine content, elementary analysis and IR-spectrum. As the results of the effects of pH, equilibrium arrival time, crosslink of synthetic resin, and dielectric constant of a solvent on uranium ion adsorption for resin adsorbent, the uranium ion showed high adsorption at pH 3 or over and adsorption equilibrium of uranium ion was about 2 hours. In addition, adsorption selectivity for the resin in methanol solvent was the order of uranium ($UO_2{^{2+}}$) > iron ($Fe^{3+}$) > lutetium ($Lu^{3+}$) ions, adsorbability of the uranium ion was in the crosslinks order of 1%, 2%, 3%, and 6% was increased with the lower dielectric constant.

• 한국공간구조학회논문집
• /
• 제17권3호
• /
• pp.91-98
• /
• 2017

Most of the cultural assets in Korea are wooden structures. Due to the material characteristics of wood, the preservation of traditional wooden structure is impossible by simple maintenance. Damaged member is replaced with new member or completely dissolve and restore them. But member has a cultural value, so that it is impossible to arbitrarily replace each member. Although the preservation treatment method using synthetic resin is emphasized, there is no exact standard for proper reinforcement ratio. This paper is experimental study for reinforcement ratio of wooden flexural member with synthetic resins, Reinforced ratio on section area of flexural member. As a result, synthetic resin reinforcement are selected as experimental variables by proper ratio enhanced flexural capacity of reinforced wooden member than new wooden member.

• 한국안광학회지
• /
• 제9권2호
• /
• pp.313-322
• /
• 2004

유리에는 크게 무기유리와 유기유리로 크게 나눈다. 보통 무기유리를 단순히 유리라 부르고 유기유리는 합성수지 또는 플라스틱이라 부른다. 광학용 플라스틱이라고 불리는 안경용 플라스틱 인 유기렌즈 중 polycarbonate resin이 개발되었는데 이것은 기존 플라스틱렌즈보다도 굴절률이 크고 충격에 강한 우수한 특성을 가지고 있으며 오늘날 널리 이용되고 있는 플라스틱렌즈 소재이다. 본 논문은 polycarbonate resin 안경렌즈 소재에 대해서 자세히 고찰하였다.

• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.42-51
• /
• 2010

The purpose of this study is to analyze the characteristics of environment-friendliness of Root Barrier materials based on comprehensive experiments on harmfulness of Root Barrier materials and fish toxicity of Oryzias latipes mortality to verify eco-toxicity of each method of construction and Root Barrier material, which are to be applied by taking eco-toxicity into account when building ecological flows in upper areas on natural and artificial grounds. As a result, the following conclusions have been reached in this study: 1. In regard of the harmfulness analyzed, each material showed a different result of analytical value in each lab tank. Compared to lab tank, pH (la), DO (lb), T-N (VI) and T-coli (la) were in the same grade, but COD, SS, T-P and F-coli were less than that of control, respectively increased or decreased by material were analyzed. 2. In the experiment of fish toxicity, Barrier sheet was found to have 66.7% of fish mortality, indicating strong fish toxicity. Synthetic rubber system root barrier sheet (20.0%) was analyzed to have medium fish toxicity, while Synthetic resin system root barrier-waterproof sheet (3.3%), Synthetic rubber system membrane root barrier sheet (3.3%) and Synthetic resin system root barrier sheet (0.0%) showed relatively lower mortality and fish toxicity. To sum up such results as found in the experiment mentioned so far, the values of harmfulness and root penetration resistance analyzed were different in each lab tank, but there was absolutely little correlation with the mortality gained from the experiment on fish toxicity. In the experiment of fish toxicity, environment-friendly root barrier materials were analyzed, and it was found that Synthetic resin system root barrier sheet, Synthetic resin system root barrier waterproof sheet and Synthetic rubber system membrane root barrier sheet are highly environment-friendly. In contrast, Synthetic rubber system root barrier sheet was found to have medium-level environment-friendliness. Also, Barrier sheet was analyzed to have low environment-friendliness.

• 통합자연과학논문집
• /
• 제10권4호
• /
• pp.225-231
• /
• 2017

Cryptand resins were synthesized by mixing 1-aza-18-crown-6 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 5%, and 10% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on uranium ion adsorption for resin adsorbent, the uranium ion showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in methanol solvent was the order of uranium ($UO_2{^{2+}}$) > calcium ($Ca^{2+}$) > neodymium ($Nd^{3+}$) ion, adsorbability of the uranium ion was the crosslink in order of 1%, 2%, 5%, and 10% and it was increased with the lower dielectric constant.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2135-2139
• /
• 2000

시아노구아니딘-포름알데히드 수지에 의한 음이온성 콜로이드 입자의 응집현상은 음이온성 입자의 표면전하와 디아미노메틸렌우레아(diaminomethylene urea: DU) 이온과의 전기적인 작용에 기인한다고 보고되어 있다. 본 논문에서는 음이온성 염료폐수를 응집처리하기 위하여 100~500 nm의 양이온성 시아노구아니딘-포름알데히드 수지를 합성하였고, 응집제 수용액의 pH가 낮을수록 응집제의 Zeta potential은 높게 측정되었다. 농도 0.4 g/L 반응성 염료폐수를 응집처리하였을 경우 pH가 3, 5, 7, 9, 11 중에서 pH가 3인 조건이 다른 pH조건보다 COD, 색도 제거율이 높게 나타났으며, pH 3인 조건에서 400 ppm 주입시 COD 74%, 색도 90% 정도 제거할 수 있었다.

• 한국공간구조학회논문집
• /
• 제17권3호
• /
• pp.83-90
• /
• 2017

Preservation of wooden structure due to deterioration and corrosion is based on preservation of original form, and wooden member should not be arbitrarily replaced or damaged. Accordingly, preservation processing method with synthetic resins is embossed. But it has an adverse effect because there is no exact standard for the reinforcement ratio with the synthetic. This paper experimental study for reinforcement ratio of wooden compressive member with synthetic resins, Reinforced ratio on section area of compressive member and direction. As a result, synthetic resin reinforcement selected as experimental variables by proper ratio enhanced compressive capacity of reinforced wooden member, than new wooden member.

• 구강회복응용과학지
• /
• 제22권1호
• /
• pp.11-21
• /
• 2006

The adjustable dental impression trays were made for being adjusted their width automatically along the width of patient's dental arch. The purpose of this study was to investigate the retentive force of adjustable dental impression trays made of different synthetic resin materials. Three pairs of adjustable trays were made of ABS(acrylonitrile butadiene styrene) synthetic resin, polyurethane synthetic resin and polycarbonate synthetic resin with a hole and without a rim on the border area of them. The experiment was done with the horse-shoe shaped metal plate to pull out the set impression body from the tray jig which was made for holding the tray on the lower part of Universal Testing Machine(UTM, Zwick Z020, Zwick Co., Germany). After the alginate impression in the tray was allowed to set four minutes, a tensile force was applied at right angles to the tray which had been previously seated on the jig. The force was applied to measure a maximum force by use of UTM at a constant strain rate 100mm per minute. The results obtained in this study were as follows : 1. The upper trays were showed higher retentive force than lower trays in three tray materials. 2. There was no significant difference in the retentive force of the tray materials(p>0.05).

• 통합자연과학논문집
• /
• 제6권3호
• /
• pp.151-157
• /
• 2013

The ion exchange resins were synthesized from 1-aza-18-crown-6 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous material) divinylbenzene (DVB) copolymer with crosslinks of 1%, 6%, and 15% by substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, surface area, and IR-spectrum. The object of this study was to seperate the metal ion absorbed in reinforcement water fire extinguishing agent. As the results of the effects of pH, equilibrium arrival time, and crosslink of synthetic resin on metal ion adsorption for resin adsorbent, the metal ions were showed high adsorption at pH 3 or over and adsorption equilibrium of metal ions was about 2 hours. In addition, adsorption selectivity for the resin in water was the order of Al (III) > Ni (II) > Sm (III) ions, adsorbability of the metal ions was in the crosslinks order of 1%, 6%, and 15%.