• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.154-159
• /
• 2001

(Li,Al)$MnO_2(OH)_2$:Co 화합물의 합성르 수열법에 의해 행하였다. 출발원료는 $MnO_2$, LiOH.$H_2$O, $Co_3O_4$, $Al(OH)_3$이 사용되었으며, 단일상의 (Li,Al)$MnO_2(OH)_2$:Co 화합물을 얻을 수 있는 최적의 합성조건은 다음과 같았다. 반응온도 : $200^{\circ}C$ 반응시간 ; 3일간, 반응장치 ; 시이소형, 수열용매 ; 3M-KOH, (Li,Al)$MnO_2(OH)_2$:Co 의 원자비 = 1:2.1:2.5~2:0.5~1. 수열합성된 단사의 (Li,Al)$MnO_2(OH)_2$:Co 화합물은 결정성이 우수하였으며, 청색안료로써 천연 오수에 필적하는 발색효과를 나타내었다. 합성된 (Li,Al)$MnO_2(OH)_2$:Co 화합물의 형태는 육각 판싱이였으며, 입자의 크기는 0.5~1 $\mu\textrm{m}$의 미립자이였다.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.87-90
• /
• 2002

$LiCoO_{2}$ powders were synthesized at various temperatures using lithium hydroxide and cobalt hydroxide as precursors prepared by precipitation process and freeze-drying. In this study, the$LiCoO_{2}$ samples were synthesized via a solid state reaction with various LiOH concentration between 10 % and 30 % excess. And $LiCoO_{2}$powders were calcined at 600~$800^{\circ}C$ in a short time. Measurements of XRD and SEM were performed to characterize the properties of the prepared materials. The effect of amount of Li ions on the structural change in powder has been examined using the XRD analysis. For the not added excess of LiOH, CoOOH phase presented in the XRD pattern of $LiCoO_{2}$ due to loss of Li ions during firing. The morphology and particle size of the powders were examined using SEM. The obtained powders are high temperature-$LiCoO_{2}$HT-LiCoO$_{2}$) and homogeneous with the range of grain size in the order of hundreds of nanometers. The effects of variation of LiOH concentration on the structural change in powder were investigated using the Rietveld analysis. As an analysis result, c/a is constant by 4.99 on all occasions. Finally, the structure of HT-$LiCoO_{2}$ was simulated by the commercial software $Creius^{2}$(Molecular Simulations, Inc.) from the results of Rietveld analysis.

• 한국결정성장학회지
• /
• 제14권6호
• /
• pp.267-271
• /
• 2004

우레아 가수분해법을 이용하여 리튬이차전지용 $LiCoO_2$ 양극 분말을 합성하였다. Li/Co 몰비가 다르고 가수분해에 의해 얻어진 전구체는 다양한 온도에서 열처리되었다. 저온상 $LiCoO_2(LT-LiCoO_2)$와 고온상 $LiCoO_2(HT-LiCoO_2)$는 $500^{\circ}C$에서 2시간 열처리 후 합성되었고, 저온상에서 고온상으로 상전이는 $700^{\circ}C$ 이상에서 완전히 일어났다. 열처리 온도가 증가함에 따라 $LiCoO_2$의 층상구조가 잘 발달하였다. 충방전 실험결과 Li/Co의 몰비가 1.2이고 $800^{\circ}C$에서 열처리한 $LiCoO_2$의 초기용량이 152 mAh/g으로 높았으며, 40회 충.방전 후에는 9.2%의 용량감소를 나타내는 상대적으로 안정한 충방전 특성을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.327-330
• /
• 2010

$LiCoO_2$, a cathode material for lithium rechargeable batteries, was prepared in a nanoscale through a simple sonochemistry. First, $Co_3O_4$ nanoparticles were prepared by reacting NaOH and $CoCl_2$ or $CoSO_4$ with a sonochemical method, operated at 20 kHz and 220 W for 20 min, very powerful multibubble sonoluminescence conditions for chemical reactions. Second, LiOH was coated onto the $Co_3O_4$ nanoparticles by the same method as above. Finally, $LiCoO_2$ nanoparticles of about 10~30 nm size in diameter were obtained by the thermal treatment of the resulting LiOH-coated $Co_3O_4$ nanoparticles at $500^{\circ}C$ for 3 hr. This synthetic process is relatively quite mild and simple compared to the known method for the synthesis of $LiCoO_2$ nanoparticles. The materials synthesized were characterized by infrared spectroscopy, X-ray diffraction, inductively coupled plasma spectrometer, and high resolution-transmission electron microscopy analyses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.143-146
• /
• 1998

The $LiCoO_2$ powder was synthesized at >$700^{\circ}C$, >$850^{\circ}C$ by solution route. In this paper, we investigated X-ray diffraction, and charge-discharge performance for $LiCoO_2$/Li and $LiCoO_2$/MPCF cell. The $LiCoO_2$/Li ceSl exhibited a high avmge discharge potential of 38-3% and a good cycle life performance at 5(hnA/g during chargedischarge cycling between 43-3.0V. And, the $LiCoO_2$MPCF cell showed a high average discharge voltage of 3.6-3.W and a excellent cycle life prfomam during chargedischarge cycling b&wm 4 2-2.W. As a result, the $LiCoO_2$ powdm syd-eizd by solution route is a good cathode material for lithium ion secondary battery.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 제1회 총회 및 추계학술발표회
• /
• pp.76-76
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1125-1132
• /
• 2000

The pH effect of the precursor solution on the preparation of $LiCoO_2$ by a solution phase reaction containing malonic acid was carried out. Layered $LiCoO_2$ powders were obtained with the precursors prepared at the different pHs (4, 7, and 9) and heat-treated at $700^{\circ}C(LiCoO_2-700)$ or $850^{\circ}C(LiCoO_2-850)$ in air. pHs of the media for precursor synthesis affects the charge/discharge and electrochemical properties of the $LiCoO_2electrodes.$ Upon irrespective of pH of the precursor media, X-ray diffraction spectra recorded for $LiCoO_2-850$ powder showed higher peak intensity ratio of I(003)/I(104) than that of $LiCoO_2-700$, since the better crystallization of the former crystallized better. However, $LiCoO_2$ synthesized at pH 4 displayed an abnormal higher intensity ratio of I(003)/I(104) than those synthesized at pH 7 and 9. The surface morphology of the $LiCoO_2-850$ powders was rougher and more irregular than that of $LiCoO_2-700$ made from the precursor synthesized at pH 7 and 9. The $LiCoO_2electrodes$ prepared with the precursors synthesized at pH 7 and 9 showed a better electrochemical and charge/discharge characteristics. From the AC impedance spectroscopic experiments for the electrode made from the precursor prepared in pH 7, the chemical diffusivity of Li ions (DLi+) in $Li0.58CoO_2determined$ was 2.7 ${\times}$10-8 $cm^2s-1$. A cell composed of the $LiCoO_2-700$ cathode prepared in pH 7 with Lithium metal anode reveals an initial discharge specific capacity of 119.8 mAhg-1 at a current density of 10.0 mAg-1 between 3.5 V and 4.3 V. The full-cell composed with $LiCoO_2-700$ cathode prepared in pH 7 and the Mesocarbon Pitch-based Carbon Fiber (MPCF) anode separated by a Cellgard 2400 membrane showed a good cycleability. In addition, it was operated over 100 charge/discharge cycles and displayed an average reversible capacity of nearly 130 mAhg-1.

• 한국결정성장학회지
• /
• 제24권3호
• /
• pp.94-98
• /
• 2014

$LiCoO_2$는 박막 베터리의 양극재료로써 많은 관심을 받고 있다. 본 연구에서는 스핀 코터를 이용한 졸-겔 합성공정과 열처리 과정에 의해서 Au 지지체 위에 $LiCoO_2$ 박막을 합성하였다. 합성된 박막의 구조는 X-선회절분석, 라만분광 광도계를 이용하여 분석하였다. 박막의 입자 형태는 전자현미경에 의해 관찰하였다. X-선회절분석, 라만분광광도계의 결과로부터, $550^{\circ}C$와 $750^{\circ}C$에서 합성된 박막은 스피넬구조와 층상 암염 형 구조를 가지는 박막으로 보이며, $650^{\circ}C$에서 합성된 박막은 층상 암염 형 구조와 스피넬 구조가 혼재되어져 있는 것으로 생각된다. $750^{\circ}C$에서 합성된 박막은 다른 낮은 온도에서 합성된 박막보다 큰 결정질의 균일한 분포의 입자를 가지는 것으로 확인되었다.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.388-394
• /
• 2004

균일하게 혼합된 LiNO$_3$와 Co 금속분말을 알곤 분위기 하에서 SHS 공정으로 리튬이차전지용 양극활물질인 LiCoO$_2$분말을 합성하였다. 여러 가지 반응변수에 따라 제조된 분말의 특성과 전기화학적 특성평가를 수행하였는데, 반응온도 및 속도와 제조된 분말의 입도는 각각 Li/Co 몰비와 시료의 냉각속도 변화로 제어 가능하였다. Li/Co 몰비가 1.05일 때 최대방전용량인 145 mAh/g을 나타냈으며, 10회 충ㆍ방전 실험 후 6.4%의 낮은 용량감소를 갖는 비교적 안정된 cycling 특성을 보였다.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.277-282
• /
• 2011

[ $LiCoO_2$ ] a cathode material for lithium rechargeable batteries, was prepared using recycled $Co_3O_4$. First, the cobalt hydroxide powders were separated from waste WC-Co hard metal with acid-base chemical treatment, and then the impurities were eliminated by centrifuge method. Subsequently, $Co_3O_4$ powders were prepared by thermal treatment of resulting $Co(OH)_2$. By adding a certain amount of $Li_2CO_3$ and $LiOH{\cdot}H_2O$, the $LiCoO_2$ was obtained by sintering for 10 h in air at $800^{\circ}C$. The synthesized $LiCoO_2$ particles were characterized by X-ray diffraction (XRD) and Scanning Electron Microscope (SEM) analysis.